Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {InterchainModule} from "./InterchainModule.sol";

import {CortexModuleEvents} from "../events/CortexModuleEvents.sol";
import {ICortexGasOracle} from "../interfaces/ICortexGasOracle.sol";
import {ICortexModule} from "../interfaces/ICortexModule.sol";
import {InterchainEntry, InterchainEntryLib} from "../libs/InterchainEntry.sol";
import {ModuleEntryLib} from "../libs/ModuleEntry.sol";
import {ThresholdECDSA} from "../libs/ThresholdECDSA.sol";
import {VersionedPayloadLib} from "../libs/VersionedPayload.sol";

import {ClaimableFees} from "../fees/ClaimableFees.sol";

import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {MessageHashUtils} from "@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol";

contract CortexModule is InterchainModule, ClaimableFees, Ownable, CortexModuleEvents, ICortexModule {
    using VersionedPayloadLib for bytes;

    // TODO: make sure this is a good enough default value
    uint256 public constant DEFAULT_VERIFY_GAS_LIMIT = 100_000;

    /// @dev Struct to hold the verifiers and the threshold for the module.
    ThresholdECDSA internal _verifiers;

    /// @dev Gas limit for the verifyEntry function on the remote chain.
    mapping(uint64 chainId => uint256 gasLimit) internal _verifyGasLimit;
    /// @dev Hash of the last gas data sent to the remote chain.
    mapping(uint64 chainId => bytes32 gasDataHash) internal _lastGasDataHash;
    /// @dev Nonce of the last gas data received from the remote chain.
    mapping(uint64 chainId => uint64 gasDataNonce) internal _lastGasDataNonce;

    /// @dev Fraction of the fees to be paid to the claimer (100% = 1e18).
    uint256 internal _claimerFraction;
    /// @dev Recipient of the fees collected by the module.
    address internal _feeRecipient;

    /// @notice Address of the gas oracle used for estimating the verification fees.
    address public gasOracle;

    constructor(address interchainDB, address owner_) InterchainModule(interchainDB) Ownable(owner_) {
        // ThresholdECDSA throws an explicit error if threshold is not set, so default value is not needed
    }

    // ═══════════════════════════════════════════════ PERMISSIONED ════════════════════════════════════════════════════

    /// @notice Adds a new verifier to the module.
    /// @dev Could be only called by the owner. Will revert if the verifier is already added.
    function addVerifier(address verifier) external onlyOwner {
        _addVerifier(verifier);
    }

    /// @notice Adds a list of new verifiers to the module.
    /// @dev Could be only called by the owner. Will revert if any of the verifiers is already added.
    function addVerifiers(address[] calldata verifiers) external onlyOwner {
        uint256 length = verifiers.length;
        for (uint256 i = 0; i < length; ++i) {
            _addVerifier(verifiers[i]);
        }
    }

    /// @notice Removes a verifier from the module.
    /// @dev Could be only called by the owner. Will revert if the verifier is not added.
    function removeVerifier(address verifier) external onlyOwner {
        _removeVerifier(verifier);
    }

    /// @notice Removes a list of verifiers from the module.
    /// @dev Could be only called by the owner. Will revert if any of the verifiers is not added.
    function removeVerifiers(address[] calldata verifiers) external onlyOwner {
        uint256 length = verifiers.length;
        for (uint256 i = 0; i < length; ++i) {
            _removeVerifier(verifiers[i]);
        }
    }

    /// @notice Sets the threshold of the module.
    /// @dev Could be only called by the owner. Will revert if the threshold is zero.
    function setThreshold(uint256 threshold) external onlyOwner {
        _verifiers.modifyThreshold(threshold);
        emit ThresholdSet(threshold);
    }

    /// @notice Sets the address of the fee collector, which will have the verification fees forwarded to it.
    /// @dev Could be only called by the owner.
    function setFeeRecipient(address feeRecipient) external onlyOwner {
        if (feeRecipient == address(0)) {
            revert CortexModule__FeeRecipientZeroAddress();
        }
        _feeRecipient = feeRecipient;
        emit FeeRecipientSet(feeRecipient);
    }

    /// @notice Sets the fraction of the accumulated fees to be paid to caller of `claimFees`.
    /// This encourages rational actors to call the function as soon as claim fee is higher than the gas cost.
    /// @dev Could be only called by the owner. Could not exceed 1% (1e16).
    function setClaimerFraction(uint256 claimerFraction) external onlyOwner {
        if (claimerFraction > MAX_CLAIMER_FRACTION) {
            revert ClaimableFees__ClaimerFractionAboveMax(claimerFraction, MAX_CLAIMER_FRACTION);
        }
        _claimerFraction = claimerFraction;
        emit ClaimerFractionSet(claimerFraction);
    }

    /// @notice Sets the address of the gas oracle to be used for estimating the verification fees.
    /// @dev Could be only called by the owner. Will revert if the gas oracle is not a contract.
    function setGasOracle(address gasOracle_) external onlyOwner {
        if (gasOracle_.code.length == 0) {
            revert CortexModule__GasOracleNotContract(gasOracle_);
        }
        gasOracle = gasOracle_;
        emit GasOracleSet(gasOracle_);
    }

    /// @notice Sets the estimated gas limit for verifying an entry on the given chain.
    /// @dev Could be only called by the owner.
    /// @param chainId      The chain ID for which to set the gas limit
    /// @param gasLimit     The new gas limit for the verification on the specified chain
    function setVerifyGasLimit(uint64 chainId, uint256 gasLimit) external onlyOwner {
        _verifyGasLimit[chainId] = gasLimit;
        emit VerifyGasLimitSet(chainId, gasLimit);
    }

    // ══════════════════════════════════════════════ PERMISSIONLESS ═══════════════════════════════════════════════════

    /// @notice Verifies an entry from the remote chain using a set of verifier signatures.
    /// If the threshold is met, the entry will be marked as verified in the Interchain DataBase.
    /// @dev List of recovered signers from the signatures must be sorted in the ascending order.
    /// @param encodedEntry The encoded entry to verify
    /// @param signatures   Signatures used to verify the entry, concatenated
    function verifyRemoteEntry(bytes calldata encodedEntry, bytes calldata signatures) external {
        bytes32 ethSignedHash = MessageHashUtils.toEthSignedMessageHash(keccak256(encodedEntry));
        _verifiers.verifySignedHash(ethSignedHash, signatures);
        (bytes memory versionedEntry, bytes memory data) = ModuleEntryLib.decodeVersionedModuleEntry(encodedEntry);
        InterchainEntry memory entry = InterchainEntryLib.decodeEntryFromMemory(versionedEntry.getPayloadFromMemory());
        if (entry.srcChainId == block.chainid) {
            revert InterchainModule__ChainIdNotRemote(entry.srcChainId);
        }
        _verifyRemoteEntry(versionedEntry);
        emit EntryVerified(entry.srcChainId, encodedEntry, ethSignedHash);
        _receiveModuleData(entry.srcChainId, entry.dbNonce, data);
    }

    // ═══════════════════════════════════════════════════ VIEWS ═══════════════════════════════════════════════════════

    /// @notice Returns the list of verifiers for the module.
    function getVerifiers() external view returns (address[] memory) {
        return _verifiers.getSigners();
    }

    /// @notice Checks if the given account is a verifier for the module.
    function isVerifier(address account) external view returns (bool) {
        return _verifiers.isSigner(account);
    }

    /// @notice Gets the threshold of the module. This is the minimum number of signatures required for verification.
    function getThreshold() public view returns (uint256) {
        return _verifiers.getThreshold();
    }

    /// @notice Returns the estimated gas limit for verifying an entry on the given chain.
    /// Note: this defaults to DEFAULT_VERIFY_GAS_LIMIT if not set.
    function getVerifyGasLimit(uint64 chainId) public view override returns (uint256 gasLimit) {
        gasLimit = _verifyGasLimit[chainId];
        if (gasLimit == 0) {
            gasLimit = DEFAULT_VERIFY_GAS_LIMIT;
        }
    }

    /// @notice Returns the amount of fees that can be claimed.
    function getClaimableAmount() public view override returns (uint256) {
        return address(this).balance;
    }

    /// @notice Returns the fraction of the fees that the claimer will receive.
    /// The result is in the range [0, 1e18], where 1e18 is 100%.
    function getClaimerFraction() public view override returns (uint256) {
        return _claimerFraction;
    }

    /// @notice Returns the address that will receive the claimed fees.
    function getFeeRecipient() public view override returns (address) {
        return _feeRecipient;
    }

    // ══════════════════════════════════════════════ INTERNAL LOGIC ═══════════════════════════════════════════════════

    /// @dev Adds a verifier to the module. Permissions should be checked in the calling function.
    function _addVerifier(address verifier) internal {
        _verifiers.addSigner(verifier);
        emit VerifierAdded(verifier);
    }

    /// @dev Removes a verifier from the module. Permissions should be checked in the calling function.
    function _removeVerifier(address verifier) internal {
        _verifiers.removeSigner(verifier);
        emit VerifierRemoved(verifier);
    }

    /// @dev Hook that is called before the fees are claimed.
    /// Useful if the inheriting contract needs to manage the state when the fees are claimed.
    // solhint-disable-next-line no-empty-blocks
    function _beforeFeesClaimed(uint256, uint256) internal override {
        // No op, as the claimable amount is tracked as the contract balance
    }

    /// @dev Internal logic to request the verification of an entry on the destination chain.
    /// Following checks have been done at this point:
    /// - Entry is a valid versioned entry coming from the Interchain DataBase.
    /// - Enough fees have been paid for the verification.
    ///
    /// Derived contracts should implement the logic to relay the entry to the destination chain:
    /// the destination module counterpart should call `db.verifyRemoteEntry(versionedEntry)`.
    function _relayDBEntry(uint64 dstChainId, bytes memory versionedEntry) internal override {
        bytes memory moduleData = _fillModuleData(dstChainId);
        bytes memory encodedEntry = ModuleEntryLib.encodeVersionedModuleEntry(versionedEntry, moduleData);
        bytes32 ethSignedEntryHash = MessageHashUtils.toEthSignedMessageHash(keccak256(encodedEntry));
        emit EntryVerificationRequested(dstChainId, encodedEntry, ethSignedEntryHash);
    }

    /// @dev Internal logic to fill the module data for the specified destination chain.
    function _fillModuleData(uint64 dstChainId) internal returns (bytes memory moduleData) {
        moduleData = _getCortexGasOracle().getLocalGasData();
        // Exit early if data is empty
        if (moduleData.length == 0) {
            return moduleData;
        }
        bytes32 dataHash = keccak256(moduleData);
        // Don't send the same data twice
        if (dataHash == _lastGasDataHash[dstChainId]) {
            moduleData = "";
        } else {
            _lastGasDataHash[dstChainId] = dataHash;
            emit GasDataSent(dstChainId, moduleData);
        }
    }

    /// @dev Internal logic to handle the auxiliary module data relayed from the remote chain.
    function _receiveModuleData(uint64 srcChainId, uint64 dbNonce, bytes memory moduleData) internal {
        // Exit early if data is empty
        if (moduleData.length == 0) {
            return;
        }
        // Don't process outdated data
        uint64 lastNonce = _lastGasDataNonce[srcChainId];
        if (lastNonce == 0 || lastNonce < dbNonce) {
            _lastGasDataNonce[srcChainId] = dbNonce;
            _getCortexGasOracle().receiveRemoteGasData(srcChainId, moduleData);
            emit GasDataReceived(srcChainId, moduleData);
        }
    }

    // ══════════════════════════════════════════════ INTERNAL VIEWS ═══════════════════════════════════════════════════

    /// @dev Internal logic to get the module fee for verifying an entry on the specified destination chain.
    function _getModuleFee(uint64 dstChainId) internal view override returns (uint256) {
        // On the remote chain the verifyRemoteEntry(entry, signatures) function will be called.
        // We need to figure out the calldata size for the remote call.
        // selector (4 bytes) + entry + signatures
        // entry is 32 (length) + 32*3 (fields) = 128
        // signatures: 32 (length) + 65*threshold (padded up to be a multiple of 32 bytes)
        // Total formula is: 4 + 32 (entry offset) + 32 (signatures offset) + 128 + 32
        return _getCortexGasOracle().estimateTxCostInLocalUnits({
            remoteChainId: dstChainId,
            gasLimit: getVerifyGasLimit(dstChainId),
            calldataSize: 260 + 64 * getThreshold()
        });
    }

    /// @dev Internal logic to get the Cortex Gas Oracle. Reverts if the gas oracle is not set.
    function _getCortexGasOracle() internal view returns (ICortexGasOracle cortexGasOracle) {
        cortexGasOracle = ICortexGasOracle(gasOracle);
        if (address(cortexGasOracle) == address(0)) {
            revert CortexModule__GasOracleZeroAddress();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IInterchainDB} from "../interfaces/IInterchainDB.sol";
import {IInterchainModule} from "../interfaces/IInterchainModule.sol";

/// @notice Common logic for all Interchain Modules.
abstract contract InterchainModule is IInterchainModule {
    /// @notice The address of the Interchain DataBase contract: used for verifying the entries.
    address public immutable INTERCHAIN_DB;

    constructor(address interchainDB) {
        INTERCHAIN_DB = interchainDB;
    }

    /// @notice Request the verification of an entry from the Interchain DataBase by the module.
    /// Note: a fee is paid to the module for verification, and could be retrieved by using `getModuleFee`.
    /// Note: this will eventually trigger `InterchainDB.verifyRemoteEntry(entry)` function on destination chain,
    /// with no guarantee of ordering.
    /// @dev Could be only called by the Interchain DataBase contract.
    /// @param dstChainId       The chain id of the destination chain
    /// @param versionedEntry   The versioned entry to verify
    function requestEntryVerification(uint64 dstChainId, bytes memory versionedEntry) external payable {
        if (msg.sender != INTERCHAIN_DB) {
            revert InterchainModule__CallerNotInterchainDB(msg.sender);
        }
        if (dstChainId == block.chainid) {
            revert InterchainModule__ChainIdNotRemote(dstChainId);
        }
        uint256 requiredFee = _getModuleFee(dstChainId);
        if (msg.value < requiredFee) {
            revert InterchainModule__FeeAmountBelowMin({feeAmount: msg.value, minRequired: requiredFee});
        }
        // Note: we don't emit an event here, the derived contract could emit an event if needed.
        _relayDBEntry(dstChainId, versionedEntry);
    }

    /// @notice Get the Module fee for verifying an entry on the specified destination chain.
    /// @param dstChainId   The chain id of the destination chain
    function getModuleFee(uint64 dstChainId) external view returns (uint256) {
        return _getModuleFee(dstChainId);
    }

    /// @dev Should be called once the Module has verified the entry and needs to signal this
    /// to the InterchainDB.
    function _verifyRemoteEntry(bytes memory versionedEntry) internal {
        IInterchainDB(INTERCHAIN_DB).verifyRemoteEntry(versionedEntry);
    }

    // solhint-disable no-empty-blocks
    /// @dev Internal logic to relay a DB entry to the destination chain.
    /// Following checks have been done at this point:
    /// - Entry is a valid versioned entry coming from the Interchain DataBase.
    /// - Enough fees have been paid for the verification.
    ///
    /// Derived contracts should implement the logic so that eventually the destination counterpart
    /// of this module calls `_verifyRemoteEntry(versionedEntry)`.
    function _relayDBEntry(uint64 dstChainId, bytes memory versionedEntry) internal virtual;

    /// @dev Internal logic to get the module fee for verifying an entry on the specified destination chain.
    function _getModuleFee(uint64 dstChainId) internal view virtual returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {InterchainModuleEvents} from "./InterchainModuleEvents.sol";

abstract contract CortexModuleEvents is InterchainModuleEvents {
    /// @notice Emitted when a verifier is added. The verifier signatures are required to verify an entry.
    /// @param verifier         The address of the verifier.
    event VerifierAdded(address verifier);

    /// Emitted when a verifier is removed.
    /// @param verifier         The address of the verifier.
    event VerifierRemoved(address verifier);

    /// @notice Emitted when a threshold is set.
    /// The threshold is the minimum number of verifiers required to verify an entry.
    /// @param threshold        The threshold value.
    event ThresholdSet(uint256 threshold);

    /// @notice Emitted when a gas oracle is set. The gas oracle will be used to estimate the gas cost of
    /// verifying an entry on the remote chain.
    /// @param gasOracle        The address of the gas oracle.
    event GasOracleSet(address gasOracle);

    /// @notice Emitted when the gas limit estimate is set for a chain.
    /// @param chainId          The chain ID of the chain.
    /// @param gasLimit         The gas limit estimate for verifying an entry on the chain.
    event VerifyGasLimitSet(uint64 chainId, uint256 gasLimit);

    /// @notice Emitted when the gas data from the gas oracle is sent to the remote chain.
    /// @param dstChainId       The chain ID of the destination chain.
    /// @param data             The encoded gas data.
    event GasDataSent(uint64 dstChainId, bytes data);

    /// @notice Emitted when the gas data from the remote chain is received.
    /// @param srcChainId       The chain ID of the source chain.
    /// @param data             The encoded gas data.
    event GasDataReceived(uint64 srcChainId, bytes data);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IGasOracle} from "./IGasOracle.sol";

interface ICortexGasOracle is IGasOracle {
    function receiveRemoteGasData(uint64 srcChainId, bytes calldata data) external;

    // ═══════════════════════════════════════════════════ VIEWS ═══════════════════════════════════════════════════════

    function getLocalGasData() external view returns (bytes memory);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IInterchainModule} from "./IInterchainModule.sol";

interface ICortexModule is IInterchainModule {
    error CortexModule__GasOracleNotContract(address gasOracle);
    error CortexModule__GasOracleZeroAddress();
    error CortexModule__FeeRecipientZeroAddress();

    function addVerifier(address verifier) external;
    function addVerifiers(address[] calldata verifiers) external;
    function removeVerifier(address verifier) external;
    function removeVerifiers(address[] calldata verifiers) external;
    function setThreshold(uint256 threshold) external;

    function setFeeRecipient(address feeRecipient) external;
    function setClaimerFraction(uint256 claimerFraction) external;
    function setGasOracle(address gasOracle_) external;
    function setVerifyGasLimit(uint64 chainId, uint256 gasLimit) external;

    function verifyRemoteEntry(bytes calldata encodedEntry, bytes calldata signatures) external;

    // ═══════════════════════════════════════════════════ VIEWS ═══════════════════════════════════════════════════════

    function gasOracle() external view returns (address);
    function getVerifiers() external view returns (address[] memory);
    function getThreshold() external view returns (uint256);
    function isVerifier(address account) external view returns (bool);
    function getVerifyGasLimit(uint64 chainId) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {SafeCast} from "@openzeppelin/contracts/utils/math/SafeCast.sol";

/// @notice Struct representing an entry in the Interchain DataBase.
/// Entry has a globally unique identifier (key) and a value.
/// Assuming `srcWriter` has written data `digest` on the source chain:
/// - key: (srcChainId, dbNonce)
/// - entryValue = keccak256(srcWriter, digest)
/// @param srcChainId   The chain id of the source chain
/// @param dbNonce      The database nonce of the entry
/// @param entryValue   The entry value
struct InterchainEntry {
    uint64 srcChainId;
    uint64 dbNonce;
    bytes32 entryValue;
}

type EntryKey is uint128;

/// @dev Signals that the module has not verified any entry with the given key.
uint256 constant ENTRY_UNVERIFIED = 0;
/// @dev Signals that the module has verified a conflicting entry with the given key.
uint256 constant ENTRY_CONFLICT = type(uint256).max;

library InterchainEntryLib {
    /// @notice Constructs an InterchainEntry struct to be written on the local chain
    /// @param dbNonce      The database nonce of the entry on the source chain
    /// @param entryValue   The value of the entry
    /// @return entry       The constructed InterchainEntry struct
    function constructLocalEntry(
        uint64 dbNonce,
        bytes32 entryValue
    )
        internal
        view
        returns (InterchainEntry memory entry)
    {
        uint64 srcChainId = SafeCast.toUint64(block.chainid);
        return InterchainEntry({srcChainId: srcChainId, dbNonce: dbNonce, entryValue: entryValue});
    }

    /// @notice Returns the value of the entry: writer + digest hashed together
    function getEntryValue(bytes32 srcWriter, bytes32 digest) internal pure returns (bytes32) {
        return keccak256(abi.encode(srcWriter, digest));
    }

    /// @notice Returns the value of the entry: writer + digest hashed together.
    /// Note: this is exposed for convenience to avoid typecasts prior to abi-encoding.
    function getEntryValue(address srcWriter, bytes32 digest) internal pure returns (bytes32) {
        return keccak256(abi.encode(srcWriter, digest));
    }

    /// @notice Encodes the InterchainEntry struct into a non-versioned entry payload.
    function encodeEntry(InterchainEntry memory entry) internal pure returns (bytes memory) {
        return abi.encode(encodeEntryKey(entry.srcChainId, entry.dbNonce), entry.entryValue);
    }

    /// @notice Decodes the InterchainEntry struct from a non-versioned entry payload in calldata.
    function decodeEntry(bytes calldata data) internal pure returns (InterchainEntry memory entry) {
        EntryKey key;
        (key, entry.entryValue) = abi.decode(data, (EntryKey, bytes32));
        (entry.srcChainId, entry.dbNonce) = decodeEntryKey(key);
    }

    /// @notice Decodes the InterchainEntry struct from a non-versioned entry payload in memory.
    function decodeEntryFromMemory(bytes memory data) internal pure returns (InterchainEntry memory entry) {
        EntryKey key;
        (key, entry.entryValue) = abi.decode(data, (EntryKey, bytes32));
        (entry.srcChainId, entry.dbNonce) = decodeEntryKey(key);
    }

    /// @notice Encodes the uint128 key of the entry from uint64 srcChainId and uint64 dbNonce.
    function encodeEntryKey(uint64 srcChainId, uint64 dbNonce) internal pure returns (EntryKey) {
        return EntryKey.wrap((uint128(srcChainId) << 64) | dbNonce);
    }

    /// @notice Decodes the uint128 key of the entry into uint64 srcChainId and uint64 dbNonce.
    function decodeEntryKey(EntryKey key) internal pure returns (uint64 srcChainId, uint64 dbNonce) {
        srcChainId = uint64(EntryKey.unwrap(key) >> 64);
        dbNonce = uint64(EntryKey.unwrap(key));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

library ModuleEntryLib {
    /// @notice Encodes the versioned entry and the auxiliary module data into a single bytes array
    /// @param versionedEntry       The versioned entry to encode
    /// @param moduleData           The auxiliary module data to encode
    /// @return encodedModuleEntry  The encoded versioned module entry
    function encodeVersionedModuleEntry(
        bytes memory versionedEntry,
        bytes memory moduleData
    )
        internal
        pure
        returns (bytes memory encodedModuleEntry)
    {
        return abi.encode(versionedEntry, moduleData);
    }

    /// @notice Decodes the bytes array into the versioned entry and the auxiliary module data
    /// @param encodedModuleEntry   The bytes array to decode
    /// @return versionedEntry      The decoded versioned entry
    /// @return moduleData          The decoded auxiliary module data
    function decodeVersionedModuleEntry(bytes memory encodedModuleEntry)
        internal
        pure
        returns (bytes memory versionedEntry, bytes memory moduleData)
    {
        return abi.decode(encodedModuleEntry, (bytes, bytes));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import {ECDSA} from "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";

struct ThresholdECDSA {
    uint256 _threshold;
    EnumerableSet.AddressSet _signers;
}

using ThresholdECDSALib for ThresholdECDSA global;

// solhint-disable code-complexity
library ThresholdECDSALib {
    using EnumerableSet for EnumerableSet.AddressSet;

    uint256 private constant SIGNATURE_LENGTH = 65;

    error ThresholdECDSA__RecoveredSignersNotSorted();
    error ThresholdECDSA__SignaturesAmountBelowThreshold(uint256 signaturesAmount, uint256 threshold);
    error ThresholdECDSA__SignaturesPayloadLengthInvalid(uint256 length);
    error ThresholdECDSA__SignerAlreadyAdded(address account);
    error ThresholdECDSA__SignerNotAdded(address account);
    error ThresholdECDSA__SignerRecoveryFailed(bytes signature);
    error ThresholdECDSA__SignerZeroAddress();
    error ThresholdECDSA__ThresholdZero();

    /// @notice Adds a new signer to the list of signers.
    /// @dev Will revert if the account is already a signer.
    function addSigner(ThresholdECDSA storage self, address account) internal {
        if (account == address(0)) revert ThresholdECDSA__SignerZeroAddress();
        bool added = self._signers.add(account);
        if (!added) {
            revert ThresholdECDSA__SignerAlreadyAdded(account);
        }
    }

    /// @notice Removes a signer from the list of signers.
    /// @dev Will revert if the account is not a signer.
    function removeSigner(ThresholdECDSA storage self, address account) internal {
        bool removed = self._signers.remove(account);
        if (!removed) {
            revert ThresholdECDSA__SignerNotAdded(account);
        }
    }

    /// @notice Modifies the threshold of signatures required.
    function modifyThreshold(ThresholdECDSA storage self, uint256 threshold) internal {
        if (threshold == 0) {
            revert ThresholdECDSA__ThresholdZero();
        }
        self._threshold = threshold;
    }

    /// @notice Checks if the account is a signer.
    function isSigner(ThresholdECDSA storage self, address account) internal view returns (bool) {
        return self._signers.contains(account);
    }

    /// @notice Gets the full list of signers.
    function getSigners(ThresholdECDSA storage self) internal view returns (address[] memory) {
        return self._signers.values();
    }

    /// @notice Gets the threshold of signatures required.
    function getThreshold(ThresholdECDSA storage self) internal view returns (uint256) {
        return self._threshold;
    }

    /// @notice Verifies that the number of signatures is greater than or equal to the threshold.
    /// Note: the list of signers recovered from the signatures is required to be sorted in ascending order.
    /// @dev Will revert if either of the conditions is met:
    /// - Threshold is not configured.
    /// - Any of the payloads is not a valid signature payload.
    /// - The number of signatures is less than the threshold.
    /// - The recovered list of signers is not sorted in the ascending order.
    function verifySignedHash(ThresholdECDSA storage self, bytes32 hash, bytes calldata signatures) internal view {
        // Figure out the signaturesAmount of signatures provided
        uint256 signaturesAmount = signatures.length / SIGNATURE_LENGTH;
        if (signaturesAmount * SIGNATURE_LENGTH != signatures.length) {
            revert ThresholdECDSA__SignaturesPayloadLengthInvalid(signatures.length);
        }
        // First, check that threshold is configured and enough signatures are provided
        uint256 threshold = self._threshold;
        if (threshold == 0) {
            revert ThresholdECDSA__ThresholdZero();
        }
        uint256 offset = 0;
        uint256 validSignatures = 0;
        address lastSigner = address(0);
        for (uint256 i = 0; i < signaturesAmount; ++i) {
            bytes memory signature = signatures[offset:offset + SIGNATURE_LENGTH];
            (address recovered, ECDSA.RecoverError error,) = ECDSA.tryRecover(hash, signature);
            if (error != ECDSA.RecoverError.NoError) {
                revert ThresholdECDSA__SignerRecoveryFailed(signature);
            }
            // Check that the recovered addresses list is strictly increasing
            if (recovered <= lastSigner) {
                revert ThresholdECDSA__RecoveredSignersNotSorted();
            }
            lastSigner = recovered;
            // Since the signers list is sorted, every time we find a valid signer it's not a duplicate
            if (isSigner(self, recovered)) {
                validSignatures += 1;
            }
            offset += SIGNATURE_LENGTH;
        }
        if (validSignatures < threshold) {
            revert ThresholdECDSA__SignaturesAmountBelowThreshold(validSignatures, threshold);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

// solhint-disable no-inline-assembly
// solhint-disable ordering
library VersionedPayloadLib {
    /// @notice Amount of bytes reserved for the version (uint16) in the versioned payload
    uint256 internal constant VERSION_LENGTH = 2;

    error VersionedPayload__PayloadTooShort(bytes versionedPayload);
    error VersionedPayload__PrecompileFailed();

    /// @notice Encodes the versioned payload into a single bytes array.
    /// @param version  The payload's version.
    /// @param payload  The payload to encode.
    function encodeVersionedPayload(uint16 version, bytes memory payload) internal pure returns (bytes memory) {
        return abi.encodePacked(version, payload);
    }

    /// @notice Extracts the version from the versioned payload (calldata reference).
    /// @param versionedPayload     The versioned payload (calldata reference).
    function getVersion(bytes calldata versionedPayload) internal pure returns (uint16 version) {
        if (versionedPayload.length < VERSION_LENGTH) {
            revert VersionedPayload__PayloadTooShort(versionedPayload);
        }
        assembly {
            // We are only interested in the highest 16 bits of the loaded full 32 bytes word.
            version := shr(240, calldataload(versionedPayload.offset))
        }
    }

    /// @notice Extracts the payload from the versioned payload (calldata reference).
    /// @dev The extracted payload is also returned as a calldata reference.
    /// @param versionedPayload     The versioned payload.
    function getPayload(bytes calldata versionedPayload) internal pure returns (bytes calldata) {
        if (versionedPayload.length < VERSION_LENGTH) {
            revert VersionedPayload__PayloadTooShort(versionedPayload);
        }
        return versionedPayload[VERSION_LENGTH:];
    }

    /// @notice Extracts the version from the versioned payload (memory reference).
    /// @param versionedPayload     The versioned payload (memory reference).
    function getVersionFromMemory(bytes memory versionedPayload) internal pure returns (uint16 version) {
        if (versionedPayload.length < VERSION_LENGTH) {
            revert VersionedPayload__PayloadTooShort(versionedPayload);
        }
        assembly {
            // We are only interested in the highest 16 bits of the loaded full 32 bytes word.
            // We add 0x20 to skip the length of the bytes array.
            version := shr(240, mload(add(versionedPayload, 0x20)))
        }
    }

    /// @notice Extracts the payload from the versioned payload (memory reference).
    /// @dev The extracted payload is copied into a new memory location. Use `getPayload` when possible
    /// to avoid extra memory allocation.
    /// @param versionedPayload     The versioned payload (memory reference).
    function getPayloadFromMemory(bytes memory versionedPayload) internal view returns (bytes memory payload) {
        if (versionedPayload.length < VERSION_LENGTH) {
            revert VersionedPayload__PayloadTooShort(versionedPayload);
        }
        // Figure how many bytes to copy and allocate the memory for the extracted payload.
        uint256 toCopy;
        unchecked {
            toCopy = versionedPayload.length - VERSION_LENGTH;
        }
        payload = new bytes(toCopy);
        // Use identity precompile (0x04) to copy the payload. Unlike MCOPY, this is available on all EVM chains.
        bool res;
        assembly {
            // We add 0x20 to skip the length of the bytes array.
            // We add 0x02 to skip the 2 bytes reserved for the version.
            // Copy the payload to the previously allocated memory.
            res := staticcall(gas(), 0x04, add(versionedPayload, 0x22), toCopy, add(payload, 0x20), toCopy)
        }
        if (!res) {
            revert VersionedPayload__PrecompileFailed();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

import {ClaimableFeesEvents} from "../events/ClaimableFeesEvents.sol";
import {IClaimableFees} from "../interfaces/IClaimableFees.sol";

import {Address} from "@openzeppelin/contracts/utils/Address.sol";

/// @notice A simple abstraction for a contract that is collecting fees in native chain token.
/// The claim process could be performed by anyone, but the fees will be sent to
/// the predefined address. The claimer will receive a fraction of the fees to offset
/// the gas costs.
/// @dev The contract is implemented in a stateless way to allow the inheriting
/// contract to be immutable or upgradeable.
abstract contract ClaimableFees is ClaimableFeesEvents, IClaimableFees {
    uint256 private constant FEE_PRECISION = 1e18;
    /// @dev The maximum fraction that the claimer can receive is 1%.
    uint256 internal constant MAX_CLAIMER_FRACTION = 1e16;

    /// @notice Transfers the accumulated fees to the fee recipient.
    /// Message caller receives a fraction of the fees as a reward to offset the gas costs.
    /// The reward amount could be obtained by calling the `getClaimerReward` function beforehand.
    /// @dev Will revert if the claimable amount is zero or the fee recipient is not set.
    function claimFees() external {
        uint256 amount = getClaimableAmount();
        if (amount == 0) {
            revert ClaimableFees__FeeAmountZero();
        }
        address recipient = getFeeRecipient();
        if (recipient == address(0)) {
            revert ClaimableFees__FeeRecipientZeroAddress();
        }
        // Subtract the claimer reward from the total amount
        uint256 reward = _getClaimerReward(amount);
        _beforeFeesClaimed(amount, reward);
        // We can do unchecked subtraction because `getClaimerReward` ensures that `reward <= amount * 0.01`
        unchecked {
            amount -= reward;
        }
        // Emit the event before transferring the fees
        emit FeesClaimed(recipient, amount, msg.sender, reward);
        Address.sendValue(payable(recipient), amount);
        Address.sendValue(payable(msg.sender), reward);
    }

    /// @notice Returns the amount of native chain token that the claimer will receive
    /// after calling the `claimFees` function.
    function getClaimerReward() external view returns (uint256) {
        uint256 amount = getClaimableAmount();
        return _getClaimerReward(amount);
    }

    /// @notice Returns the amount of fees that can be claimed.
    function getClaimableAmount() public view virtual returns (uint256);

    /// @notice Returns the fraction of the fees that the claimer will receive.
    /// The result is in the range [0, 1e18], where 1e18 is 100%.
    function getClaimerFraction() public view virtual returns (uint256);

    /// @notice Returns the address that will receive the claimed fees.
    function getFeeRecipient() public view virtual returns (address);

    /// @dev Hook that is called before the fees are claimed.
    /// Useful if the inheriting contract needs to manage the state when the fees are claimed.
    function _beforeFeesClaimed(uint256 fullAmount, uint256 reward) internal virtual;

    /// @dev Returns the claimer reward for the given amount.
    function _getClaimerReward(uint256 amount) internal view returns (uint256) {
        uint256 fraction = getClaimerFraction();
        if (fraction > MAX_CLAIMER_FRACTION) {
            revert ClaimableFees__ClaimerFractionAboveMax(fraction, MAX_CLAIMER_FRACTION);
        }
        // The returned value is in the range [0, amount * 0.01]
        return (amount * fraction) / FEE_PRECISION;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {InterchainEntry} from "../libs/InterchainEntry.sol";

interface IInterchainDB {
    error InterchainDB__ChainIdNotRemote(uint64 chainId);
    error InterchainDB__EntryConflict(address module, InterchainEntry newEntry);
    error InterchainDB__EntryVersionMismatch(uint16 version, uint16 required);
    error InterchainDB__FeeAmountBelowMin(uint256 feeAmount, uint256 minRequired);
    error InterchainDB__ModulesNotProvided();

    function writeEntry(bytes32 digest) external returns (uint64 dbNonce);

    function requestEntryVerification(
        uint64 dstChainId,
        uint64 dbNonce,
        address[] memory srcModules
    )
        external
        payable;

    function writeEntryRequestVerification(
        uint64 dstChainId,
        bytes32 digest,
        address[] memory srcModules
    )
        external
        payable
        returns (uint64 dbNonce);

    function verifyRemoteEntry(bytes memory encodedEntry) external;

    // ═══════════════════════════════════════════════════ VIEWS ═══════════════════════════════════════════════════════

    function getInterchainFee(uint64 dstChainId, address[] memory srcModules) external view returns (uint256);

    function getEncodedEntry(uint64 dbNonce) external view returns (bytes memory);
    function getEntry(uint64 dbNonce) external view returns (InterchainEntry memory);
    function getEntryValue(uint64 dbNonce) external view returns (bytes32);

    function getDBNonce() external view returns (uint64);

    function checkEntryVerification(
        address dstModule,
        InterchainEntry memory entry
    )
        external
        view
        returns (uint256 moduleVerifiedAt);

    // solhint-disable-next-line func-name-mixedcase
    function DB_VERSION() external pure returns (uint16);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @notice Every Module may opt a different method to confirm the verified entries on destination chain,
/// therefore this is not a part of a common interface.
interface IInterchainModule {
    error InterchainModule__CallerNotInterchainDB(address caller);
    error InterchainModule__ChainIdNotRemote(uint64 chainId);
    error InterchainModule__FeeAmountBelowMin(uint256 feeAmount, uint256 minRequired);

    function requestEntryVerification(uint64 dstChainId, bytes memory versionedEntry) external payable;

    // ═══════════════════════════════════════════════════ VIEWS ═══════════════════════════════════════════════════════

    function getModuleFee(uint64 dstChainId) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

abstract contract InterchainModuleEvents {
    /// @notice Emitted when an entry verification on a remote chain is requested.
    /// @param dstChainId           The chain ID of the destination chain.
    /// @param entry                The encoded entry to be verified.
    /// @param ethSignedEntryHash   The digest of the entry (EIP-191 personal signed).
    event EntryVerificationRequested(uint64 indexed dstChainId, bytes entry, bytes32 ethSignedEntryHash);

    /// @notice Emitted when an entry from the remote chain is verified.
    /// @param srcChainId           The chain ID of the source chain.
    /// @param entry                The encoded entry that was verified.
    /// @param ethSignedEntryHash   The digest of the entry (EIP-191 personal signed).
    event EntryVerified(uint64 indexed srcChainId, bytes entry, bytes32 ethSignedEntryHash);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IGasOracle {
    // ═══════════════════════════════════════════════════ VIEWS ═══════════════════════════════════════════════════════

    function convertRemoteValueToLocalUnits(uint64 remoteChainId, uint256 value) external view returns (uint256);

    function estimateTxCostInLocalUnits(
        uint64 remoteChainId,
        uint256 gasLimit,
        uint256 calldataSize
    )
        external
        view
        returns (uint256);

    function estimateTxCostInRemoteUnits(
        uint64 remoteChainId,
        uint256 gasLimit,
        uint256 calldataSize
    )
        external
        view
        returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```solidity
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position is the index of the value in the `values` array plus 1.
        // Position 0 is used to mean a value is not in the set.
        mapping(bytes32 value => uint256) _positions;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._positions[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We cache the value's position to prevent multiple reads from the same storage slot
        uint256 position = set._positions[value];

        if (position != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 valueIndex = position - 1;
            uint256 lastIndex = set._values.length - 1;

            if (valueIndex != lastIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the lastValue to the index where the value to delete is
                set._values[valueIndex] = lastValue;
                // Update the tracked position of the lastValue (that was just moved)
                set._positions[lastValue] = position;
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the tracked position for the deleted slot
            delete set._positions[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._positions[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        bytes32[] memory store = _values(set._inner);
        bytes32[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

abstract contract ClaimableFeesEvents {
    /// @notice Emitted when the claim fee fraction is set. This fraction of the fees will be paid
    /// to the caller of the `claimFees` function.
    /// This encourages rational actors to call the function as soon as claim fee is higher than the gas cost.
    /// @param claimerFraction  The fraction of the fees to be paid to the claimer (100% = 1e18)
    event ClaimerFractionSet(uint256 claimerFraction);

    /// @notice Emitted when a fee recipient is set. The fee recipient receives the claimed fees.
    /// @param feeRecipient     The address of the fee recipient.
    event FeeRecipientSet(address feeRecipient);

    /// @notice Emitted when fees are claimed to the fee recipient address.
    /// @param feeRecipient     The address that receives the claimed fees.
    /// @param claimedFees      The amount of fees claimed, after the claimer reward is deducted.
    /// @param claimer          The address of the claimer (who called `claimFees`)
    /// @param claimerReward    The reward paid to the claimer for calling the `claimFees` function.
    event FeesClaimed(address feeRecipient, uint256 claimedFees, address claimer, uint256 claimerReward);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IClaimableFees {
    error ClaimableFees__ClaimerFractionAboveMax(uint256 claimerFraction, uint256 maxAllowed);
    error ClaimableFees__FeeAmountZero();
    error ClaimableFees__FeeRecipientZeroAddress();

    function claimFees() external;

    // ═══════════════════════════════════════════════════ VIEWS ═══════════════════════════════════════════════════════

    function getClaimableAmount() external view returns (uint256);
    function getClaimerFraction() external view returns (uint256);
    function getClaimerReward() external view returns (uint256);
    function getFeeRecipient() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

{
  "remappings": [
    "@openzeppelin/=node_modules/@openzeppelin/",
    "@synapsecns/=node_modules/@synapsecns/",
    "forge-std/=node_modules/forge-std/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

[{"inputs":[{"internalType":"address","name":"interchainDB","type":"address"},{"internalType":"address","name":"owner_","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[{"internalType":"uint256","name":"claimerFraction","type":"uint256"},{"internalType":"uint256","name":"maxAllowed","type":"uint256"}],"name":"ClaimableFees__ClaimerFractionAboveMax","type":"error"},{"inputs":[],"name":"ClaimableFees__FeeAmountZero","type":"error"},{"inputs":[],"name":"ClaimableFees__FeeRecipientZeroAddress","type":"error"},{"inputs":[],"name":"CortexModule__FeeRecipientZeroAddress","type":"error"},{"inputs":[{"internalType":"address","name":"gasOracle","type":"address"}],"name":"CortexModule__GasOracleNotContract","type":"error"},{"inputs":[],"name":"CortexModule__GasOracleZeroAddress","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"InterchainModule__CallerNotInterchainDB","type":"error"},{"inputs":[{"internalType":"uint64","name":"chainId","type":"uint64"}],"name":"InterchainModule__ChainIdNotRemote","type":"error"},{"inputs":[{"internalType":"uint256","name":"feeAmount","type":"uint256"},{"internalType":"uint256","name":"minRequired","type":"uint256"}],"name":"InterchainModule__FeeAmountBelowMin","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"ThresholdECDSA__RecoveredSignersNotSorted","type":"error"},{"inputs":[{"internalType":"uint256","name":"signaturesAmount","type":"uint256"},{"internalType":"uint256","name":"threshold","type":"uint256"}],"name":"ThresholdECDSA__SignaturesAmountBelowThreshold","type":"error"},{"inputs":[{"internalType":"uint256","name":"length","type":"uint256"}],"name":"ThresholdECDSA__SignaturesPayloadLengthInvalid","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"ThresholdECDSA__SignerAlreadyAdded","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"ThresholdECDSA__SignerNotAdded","type":"error"},{"inputs":[{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"ThresholdECDSA__SignerRecoveryFailed","type":"error"},{"inputs":[],"name":"ThresholdECDSA__SignerZeroAddress","type":"error"},{"inputs":[],"name":"ThresholdECDSA__ThresholdZero","type":"error"},{"inputs":[{"internalType":"bytes","name":"versionedPayload","type":"bytes"}],"name":"VersionedPayload__PayloadTooShort","type":"error"},{"inputs":[],"name":"VersionedPayload__PrecompileFailed","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"claimerFraction","type":"uint256"}],"name":"ClaimerFractionSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint64","name":"dstChainId","type":"uint64"},{"indexed":false,"internalType":"bytes","name":"entry","type":"bytes"},{"indexed":false,"internalType":"bytes32","name":"ethSignedEntryHash","type":"bytes32"}],"name":"EntryVerificationRequested","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint64","name":"srcChainId","type":"uint64"},{"indexed":false,"internalType":"bytes","name":"entry","type":"bytes"},{"indexed":false,"internalType":"bytes32","name":"ethSignedEntryHash","type":"bytes32"}],"name":"EntryVerified","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"feeRecipient","type":"address"}],"name":"FeeRecipientSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"feeRecipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"claimedFees","type":"uint256"},{"indexed":false,"internalType":"address","name":"claimer","type":"address"},{"indexed":false,"internalType":"uint256","name":"claimerReward","type":"uint256"}],"name":"FeesClaimed","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"srcChainId","type":"uint64"},{"indexed":false,"internalType":"bytes","name":"data","type":"bytes"}],"name":"GasDataReceived","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"dstChainId","type":"uint64"},{"indexed":false,"internalType":"bytes","name":"data","type":"bytes"}],"name":"GasDataSent","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"gasOracle","type":"address"}],"name":"GasOracleSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"threshold","type":"uint256"}],"name":"ThresholdSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"verifier","type":"address"}],"name":"VerifierAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"verifier","type":"address"}],"name":"VerifierRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"chainId","type":"uint64"},{"indexed":false,"internalType":"uint256","name":"gasLimit","type":"uint256"}],"name":"VerifyGasLimitSet","type":"event"},{"inputs":[],"name":"DEFAULT_VERIFY_GAS_LIMIT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"INTERCHAIN_DB","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"verifier","type":"address"}],"name":"addVerifier","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"verifiers","type":"address[]"}],"name":"addVerifiers","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"claimFees","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"gasOracle","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getClaimableAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getClaimerFraction","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getClaimerReward","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getFeeRecipient","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint64","name":"dstChainId","type":"uint64"}],"name":"getModuleFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getThreshold","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getVerifiers","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint64","name":"chainId","type":"uint64"}],"name":"getVerifyGasLimit","outputs":[{"internalType":"uint256","name":"gasLimit","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"isVerifier","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"verifier","type":"address"}],"name":"removeVerifier","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"verifiers","type":"address[]"}],"name":"removeVerifiers","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"dstChainId","type":"uint64"},{"internalType":"bytes","name":"versionedEntry","type":"bytes"}],"name":"requestEntryVerification","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"claimerFraction","type":"uint256"}],"name":"setClaimerFraction","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"feeRecipient","type":"address"}],"name":"setFeeRecipient","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"gasOracle_","type":"address"}],"name":"setGasOracle","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"threshold","type":"uint256"}],"name":"setThreshold","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"chainId","type":"uint64"},{"internalType":"uint256","name":"gasLimit","type":"uint256"}],"name":"setVerifyGasLimit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes","name":"encodedEntry","type":"bytes"},{"internalType":"bytes","name":"signatures","type":"bytes"}],"name":"verifyRemoteEntry","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

0000000000000000000000002def303ea27a3674bb3a5d017e60b2ef43312a11000000000000000000000000e7353bedc72d29f99d6ca5cde69f807cce5d57e4

-----Decoded View---------------
Arg [0] : interchainDB (address): 0x2DeF303EA27a3674bb3a5d017e60B2Ef43312A11
Arg [1] : owner_ (address): 0xE7353BEdc72D29f99D6cA5CDE69F807cCE5d57e4

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 0000000000000000000000002def303ea27a3674bb3a5d017e60b2ef43312a11
Arg [1] : 000000000000000000000000e7353bedc72d29f99d6ca5cde69f807cce5d57e4