Source Code
Overview
ETH Balance
0 ETH
More Info
ContractCreator
Multichain Info
N/A
Transaction Hash |
Method
|
Block
|
From
|
To
|
|||||
---|---|---|---|---|---|---|---|---|---|
Latest 1 internal transaction
Advanced mode:
Parent Transaction Hash | Block |
From
|
To
|
|||
---|---|---|---|---|---|---|
6922837 | 116 days ago | Contract Creation | 0 ETH |
Loading...
Loading
Minimal Proxy Contract for 0x22a6b84e3213a5a7625aa595d01f0caed5e459c2
Similar Match Source Code This contract matches the deployed Bytecode of the Source Code for Contract 0xCdd6C997...7a815531B The constructor portion of the code might be different and could alter the actual behaviour of the contract
Contract Name:
DSponsorNFT
Compiler Version
v0.8.20+commit.a1b79de6
Optimization Enabled:
Yes with 200 runs
Other Settings:
paris EvmVersion
Contract Source Code (Solidity Standard Json-Input format)
// SPDX-License-Identifier: MIT pragma solidity ^0.8.20; import {IDSponsorNFTBase} from "./interfaces/IDSponsorNFT.sol"; import "./lib/ERC2771ContextUpgradeable.sol"; import "./lib/ERC4907Upgradeable.sol"; import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol"; import "@openzeppelin/contracts/utils/Strings.sol"; import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol"; import "@openzeppelin/contracts-upgradeable/token/ERC721/extensions/ERC721RoyaltyUpgradeable.sol"; import "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardUpgradeable.sol"; /** * @title DSponsorNFT * @author Anthony Gourraud * @notice DSponsorNFT is an NFT contract that integrates various standards and custom functionalities. * It combines pricing in ERC20 tokens and in native currency, adds rental capabilities with ERC4907, and supports ERC2981 royalties. * Minting conditions can be set for specific tokens, and priced in any ERC20 token or native currency, and can be changed or disabled by the owner. * The contract owner can also set a custom base URI for token metadata and a contract-level metadata URI. */ contract DSponsorNFT is IDSponsorNFTBase, Initializable, ERC2771ContextUpgradeable, ERC721RoyaltyUpgradeable, ERC4907Upgradeable, ReentrancyGuardUpgradeable { using SafeERC20 for IERC20; using Strings for uint256; using Strings for address; // Counter for the number of tokens minted so far. uint256 public totalSupply; // Maximum number of NFTs that can be minted, set at initialization and immutable thereafter. uint256 public MAX_SUPPLY; // Base URI for token metadata. This is used to construct the full URI for each token. string public baseURI; // Contract-level metadata URI for platforms like OpenSea. string public contractURI; // Restrict mint to deployer (expect to be DSponsorAdmin address) address public MINTER; // Whether minting is allowed for a specific list of tokenIds or not bool public applyTokensAllowlist; // Mapping to store allowed tokenIds to mint mapping(uint256 => bool) private allowedTokenIds; // Mapping to store custom URIs for individual tokens, if set. mapping(uint256 => string) public tokenURIs; // Mapping to store default minting price settings for each ERC20 token. mapping(IERC20 => MintPriceSettings) private _defaultMintERC20Prices; // Settings for default minting price in the native currency (e.g., ETH). MintPriceSettings private _defaultMintNativePrice = MintPriceSettings(false, 0); // Mapping to store minting price settings for each ERC20 token, per token ID. mapping(uint256 => mapping(IERC20 => MintPriceSettings)) private _mintERC20Prices; // Mapping to store minting price settings for the native currency, per token ID. mapping(uint256 => MintPriceSettings) private _mintNativePrices; /** * @dev Initializes the contract with necessary parameters * @param params.name ERC721 name * @param params.symbol ERC721 symbol * @param params.baseURI Base URI for token metadata * @param params.contractURI URL for the collection-level metadata, as specified by ERC-7572. * @param params.minter Address allowed to mint tokens * @param params.maxSupply The max number of mintable ERC721 tokens. Cannot be modified after deployment. * @param params.forwarder EIP2771 forwarder address, for gasless transactions * @param params.initialOwner Admin address to set prices, base uris and more. Receives royalties. * @param params.royaltyBps Royalty fee in basis points (1% = 100 bps). * @param params.currencies Array of ERC20 token addresses accepted as default minting pricing * @param params.prices Array of prices for each currency, in the same order * @param params.allowedTokenIds Array of tokenIds that are allowed to be minted. If empty, all tokenIds are allowed */ function initialize(InitParams memory params) public initializer { __Ownable_init_unchained(params.initialOwner); __ERC2771Context_init_unchained(params.forwarder); __ERC4907_init(params.name, params.symbol); __ReentrancyGuard_init_unchained(); if (params.maxSupply == 0) { revert MaxSupplyShouldBeGreaterThan0(); } if (params.currencies.length != params.prices.length) { revert InvalidPricingStructure(params.currencies, params.prices); } _setBaseURI(params.baseURI); _setContractURI(params.contractURI); MAX_SUPPLY = params.maxSupply; /// @dev if not address(0), mint is only possible from `minter`and `owner` address MINTER = params.minter; _setRoyalty(params.initialOwner, params.royaltyBps); for (uint256 i = 0; i < params.currencies.length; i++) { _setDefaultMintPrice(params.currencies[i], true, params.prices[i]); } if (params.allowedTokenIds.length > 0) { _setTokensAllowlist(true); for (uint256 i = 0; i < params.allowedTokenIds.length; i++) { _setTokensAllowlist(params.allowedTokenIds[i], true); } } } /* ****************** * EXTERNAL FUNCTIONS ********************/ /** * @notice Mints a token with payment in the specified `currency` and transfers it to the `to` address. * If `currency` is address(0), payment is expected in the native currency. * Emits `Mint` and `IERC721-Transfer` events. * * @param tokenId The unique identifier for the minted token. Should not have been minted before and allowed to mint. * @param to The recipient address of the minted token. * @param currency The ERC20 token address for payment, or address(0) for native currency. * @param tokenData Additional data to be included in the Mint event. * * @dev Validates `currency` is enabled for minting and ensures the correct payment amount, * validates the recipient address is not zero, validates the tokenId is allowed to mint. * If `currency` is an ERC20 token, the contract requires an allowance to spend the tokens on the sender's behalf. * Uses reentrancy protection for security. * */ function mint( uint256 tokenId, address to, address currency, string calldata tokenData ) public payable nonReentrant { if (_ownerOf(tokenId) != address(0)) { revert AlreadyMinted(tokenId); } if (applyTokensAllowlist && !allowedTokenIds[tokenId]) { revert TokenNotAllowed(tokenId); } if (to == address(0)) { revert CannotBeZeroAddress(); } uint256 paidAmount = 0; // if sender is the owner, sender can mint and does not need to pay if (_msgSender() != owner()) { if (MINTER != address(0) && _msgSender() != MINTER) { revert UnauthorizedToMint(); } (bool enabled, uint256 amount) = getMintPrice(tokenId, currency); if (!enabled) { revert ForbiddenCurrency(currency); } address payable ownerRecipient = payable(owner()); if (amount > 0) { if (currency == address(0)) { if (msg.value < amount) { revert AmountValueTooLow(msg.value); } Address.sendValue(ownerRecipient, amount); } else { IERC20(currency).safeTransferFrom( _msgSender(), ownerRecipient, amount ); } paidAmount = amount; } } _safeMint(tokenId, to); emit Mint(tokenId, _msgSender(), to, currency, paidAmount, tokenData); } /** * @notice Mints a unique token based on specific input data, such as a search keyword, * to be used for advertising purposes (e.g., buying ad space for the "nft" keyword in the search section of an app). * This function ensures that each keyword is tokenized once. * * @dev The token ID is generated by hashing the `tokenData` using `keccak256`, ensuring uniqueness. * The function calls the `mint` function, which handle ERC-721 compliance, ownership assignment, * and any necessary payment logic. The `mint` function is responsible for validating that the `tokenData` * has not been previously minted. * It's also possible to compute the tokenId off-chain and then call the `mint` function directly. * * Here is an example of how to compute the tokenId in Typescript: * ```typescript * import { toUtf8Bytes, keccak256 } from 'ethers' * function stringToUint256(value: string): BigInt { * return BigInt(keccak256(toUtf8Bytes(value))) * } * ``` * * @param to The recipient address of the minted token. This address will become the token's owner. * @param currency The address of the ERC20 token to be used for payment, or the zero address (`address(0)`) to indicate payment with the native coin. * @param tokenData A unique string representing the keyword or data to be tokenized. * Payment logic and validation is handled within the `mint` function. function mintFromData( address to, address currency, string calldata tokenData ) external payable { uint256 tokenId = uint256(keccak256(abi.encodePacked(tokenData))); mint(tokenId, to, currency, tokenData); } */ /* ****************** * ONLY OWNER ********************/ /** * @notice Updates the base URI for token metadata, affecting how token URIs are generated. * Only callable by the contract owner. The base URI should be a directory path where token metadata is stored, * with each token's metadata at `{baseURI}/{tokenId}`. * * @param _baseURI The new base URI to set, typically an IPFS path or a web URL. * * @dev Ensure metadata at the new base URI follows ERC721 standards with attributes like "name", "description", and "image". */ function setBaseURI(string memory _baseURI) external onlyOwner { baseURI = _baseURI; } /** * @notice Updates the URI for contract-wide metadata, including collection details. Restricted to the contract owner. * The URI should point to a JSON file with collection metadata. * * @param _contractURI New URI for the contract metadata, typically an IPFS link or a web URL. * * @dev The metadata JSON should include keys like "name", "description", "image", and optionally "external_link", * "seller_fee_basis_points", and "fee_recipient" to comply with marketplace standards. */ function setContractURI(string memory _contractURI) external onlyOwner { _setContractURI(_contractURI); } /** * @notice Updates default minting price for a specified currency. Only the contract owner can invoke this. * Triggers a `UpdateDefaultMintPrice` event upon update. * * @param currency Address of the ERC20 token or 0 for the native currency. * @param enabled Toggle to enable or disable minting with this currency. * @param amount Price for minting a single token in the specified currency. */ function setDefaultMintPrice( address currency, bool enabled, uint256 amount ) external onlyOwner { _setDefaultMintPrice(currency, enabled, amount); } /** * @notice Updates minting price for a specified token. Only the contract owner can invoke this. * Triggers a `UpdateMintPrice` event upon update. * * @param tokenId The unique identifier for the minted token. * @param currency Address of the ERC20 token or 0 for the native currency. * @param enabled Toggle to enable or disable minting with this currency. * @param amount Price for minting a single token in the specified currency. */ function setMintPrice( uint256 tokenId, address currency, bool enabled, uint256 amount ) external onlyOwner { _setMintPrice(tokenId, currency, enabled, amount); } /** * @notice Updates royalty details for secondary sales, specifying the recipient and the royalty percentage in basis points. * * @param receiver Address to receive royalty payments. * @param feeBps Royalty fee in basis points (1% = 100 bps). */ function setRoyalty(address receiver, uint96 feeBps) external onlyOwner { _setRoyalty(receiver, feeBps); } /** * @notice Specifies if minting should follow the tokens allowlist or not * Emits a `TokensAllowlist` event * * @param _applyTokensAllowlist Whether to apply the tokens allowlist or not */ function setTokensAllowlist(bool _applyTokensAllowlist) external onlyOwner { _setTokensAllowlist(_applyTokensAllowlist); } /** * @notice Specifies if minting is allowed for specific tokenIds * Emits a `TokensAllowlistUpdated` event for each tokenId * * @param tokenIds Array of tokenIds to update * @param allowed Array of booleans to set for each tokenId */ function setTokensAreAllowed( uint256[] calldata tokenIds, bool[] calldata allowed ) external onlyOwner { if (tokenIds.length != allowed.length) { revert InvalidInputLengths(); } for (uint256 i = 0; i < tokenIds.length; i++) { _setTokensAllowlist(tokenIds[i], allowed[i]); } } /** * @notice Assigns a custom URI to a specific token, overriding the default URI construction. * Allows setting URIs for future tokens, not yet minted. * * @param _tokenId Identifier of the token to assign the URI to. * @param _tokenURI The custom URI to set for the token. */ function setTokenURI( uint256 _tokenId, string memory _tokenURI ) public onlyOwner { tokenURIs[_tokenId] = _tokenURI; emit MetadataUpdated(_tokenId); } /** * @notice Assigns custom URIs to multiple tokens, overriding the default URI construction. * Allows setting URIs for future tokens, not yet minted. * * @param _tokenIds Identifiers of the tokens to assign the URIs to. * @param _tokenURIs The custom URIs to set for the tokens. */ function setTokenURIs( uint256[] calldata _tokenIds, string[] calldata _tokenURIs ) external onlyOwner { if (_tokenIds.length != _tokenURIs.length) { revert InvalidInputLengths(); } for (uint256 i = 0; i < _tokenIds.length; i++) { tokenURIs[_tokenIds[i]] = _tokenURIs[i]; emit MetadataUpdated(_tokenIds[i]); } } /* **************** * PUBLIC GETTERS *****************/ /** * @notice Fetches the minting price and availability for a specific currency. * * @param tokenId The unique identifier for the minted token. * @param currency Address of an ERC20 token, or 0 for the native currency. * * @return enabled True if minting is enabled for the currency. * @return amount Required amount of the currency to mint one token. */ function getMintPrice( uint256 tokenId, address currency ) public view returns (bool enabled, uint256 amount) { MintPriceSettings storage mintPriceSettings = currency != address(0) ? _mintERC20Prices[tokenId][IERC20(currency)] : _mintNativePrices[tokenId]; if (mintPriceSettings.enabled) { enabled = mintPriceSettings.enabled; amount = mintPriceSettings.amount; } else { MintPriceSettings storage defaultMintPriceSettings = currency != address(0) ? _defaultMintERC20Prices[IERC20(currency)] : _defaultMintNativePrice; enabled = defaultMintPriceSettings.enabled; amount = defaultMintPriceSettings.amount; } } /** * @notice Get the current owner of the contract. * @return The address of the owner. */ function getOwner() public view returns (address) { return owner(); } /** * @notice Indicates if a token is allowed to be minted or not * @param tokenId The unique identifier for the minted token. * @return True if the token is allowed to be minted, false otherwise. */ function tokenIdIsAllowedToMint( uint256 tokenId ) external view returns (bool) { return (_ownerOf(tokenId) == address(0)) && (!applyTokensAllowlist || allowedTokenIds[tokenId]); } /* **************** * OVERRIDE FUNCTIONS *****************/ /** * @notice Constructs the URI for a given token ID, combining the base URI with token-specific extensions if available. * * * @param tokenId The unique identifier for a token. * @return The full URI string pointing to the token's metadata. If the base URI is not set, returns an empty string or * the token-specific URI if set. If both base URI and token-specific URI are set, concatenates them. * Otherwise, constructs a URI with the base URI, the chain ID, the contract address, and the token ID. * exemple: https://api.example.com/1/0x1234567890123456789012345678901234567890/1 */ function tokenURI( uint256 tokenId ) public view virtual override returns (string memory) { string memory _tokenURI = tokenURIs[tokenId]; if (bytes(_tokenURI).length > 0) { return _tokenURI; } else { return string( abi.encodePacked( baseURI, "/", address(this).toHexString(), "/", tokenId.toString() ) ); } } /** * @notice Returns the message sender. Overridden to support meta-transactions. * @return The message sender address * @dev Override for `msg.sender`. Defaults to the original `msg.sender` whenever * a call is not performed by the trusted forwarder or the calldata length is less than * 20 bytes (an address length). */ function _msgSender() internal view virtual override(ERC2771ContextUpgradeable, ContextUpgradeable) returns (address) { return ERC2771ContextUpgradeable._msgSender(); } /** * @notice Returns the message data. Overridden to support meta-transactions. * @return The message data bytes * @dev Override for `msg.data`. Defaults to the original `msg.data` whenever * a call is not performed by the trusted forwarder or the calldata length is less than * 20 bytes (an address length). */ function _msgData() internal view virtual override(ERC2771ContextUpgradeable, ContextUpgradeable) returns (bytes calldata) { return ERC2771ContextUpgradeable._msgData(); } /** * @dev ERC-2771 specifies the context as being a single address (20 bytes). */ function _contextSuffixLength() internal view virtual override(ERC2771ContextUpgradeable, ContextUpgradeable) returns (uint256) { return ERC2771ContextUpgradeable._contextSuffixLength(); } /** * @notice Checks if the contract supports an interface. * @param interfaceId The interface identifier, as specified in ERC-165 * @return True if the contract supports the interface, false otherwise * @dev Override to support multiple inheritance (ERC2981 and ERC4907) */ function supportsInterface( bytes4 interfaceId ) public view virtual override(ERC721RoyaltyUpgradeable, ERC4907Upgradeable) returns (bool) { return super.supportsInterface(interfaceId); } /* **************** * INTERNAL FUNCTIONS *****************/ /** * @notice Mints a token to a specified address with safety checks for ERC721Receiver compliance. * Ensures max supply is not exceeded. * * @param tokenId The unique identifier for the minted token. * @param to Recipient address for the minted token. * * @dev This internal function extends ERC721's `_safeMint`, adding a supply cap check. */ function _safeMint(uint256 tokenId, address to) internal { if (MAX_SUPPLY < totalSupply + 1) { revert MaxSupplyExceeded(); } totalSupply++; super._safeMint(to, tokenId); } /* **************** * PRIVATE FUNCTIONS *****************/ function _setBaseURI(string memory _baseURI) private { baseURI = _baseURI; emit BatchMetadataUpdate(0, type(uint256).max); } function _setContractURI(string memory _contractURI) private { contractURI = _contractURI; emit ContractURIUpdated(_contractURI); ///@dev ERC-7572 emit ContractURIUpdated(); } function _setDefaultMintPrice( address currency, bool enabled, uint256 amount ) private { if (currency != address(0)) { _defaultMintERC20Prices[IERC20(currency)] = MintPriceSettings( enabled, amount ); } else { _defaultMintNativePrice = MintPriceSettings(enabled, amount); } emit UpdateDefaultMintPrice(currency, enabled, amount); } function _setMintPrice( uint256 tokenId, address currency, bool enabled, uint256 amount ) private { if (_ownerOf(tokenId) != address(0)) { revert AlreadyMinted(tokenId); } if (currency != address(0)) { _mintERC20Prices[tokenId][IERC20(currency)] = MintPriceSettings( enabled, amount ); } else { _mintNativePrices[tokenId] = MintPriceSettings(enabled, amount); } emit UpdateMintPrice(tokenId, currency, enabled, amount); } function _setTokensAllowlist(bool _applyTokensAllowlist) private { applyTokensAllowlist = _applyTokensAllowlist; emit TokensAllowlist(_applyTokensAllowlist); } function _setTokensAllowlist(uint256 tokenId, bool allowed) private { allowedTokenIds[tokenId] = allowed; emit TokensAllowlistUpdated(tokenId, allowed); } function _setRoyalty(address receiver, uint96 feeBps) private { _setDefaultRoyalty(receiver, feeBps); emit RoyaltySet(receiver, feeBps); } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol) pragma solidity ^0.8.20; import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol"; import {Initializable} from "../proxy/utils/Initializable.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * The initial owner is set to the address provided by the deployer. This can * later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable { /// @custom:storage-location erc7201:openzeppelin.storage.Ownable struct OwnableStorage { address _owner; } // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff)) bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300; function _getOwnableStorage() private pure returns (OwnableStorage storage $) { assembly { $.slot := OwnableStorageLocation } } /** * @dev The caller account is not authorized to perform an operation. */ error OwnableUnauthorizedAccount(address account); /** * @dev The owner is not a valid owner account. (eg. `address(0)`) */ error OwnableInvalidOwner(address owner); event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the address provided by the deployer as the initial owner. */ function __Ownable_init(address initialOwner) internal onlyInitializing { __Ownable_init_unchained(initialOwner); } function __Ownable_init_unchained(address initialOwner) internal onlyInitializing { if (initialOwner == address(0)) { revert OwnableInvalidOwner(address(0)); } _transferOwnership(initialOwner); } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { _checkOwner(); _; } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { OwnableStorage storage $ = _getOwnableStorage(); return $._owner; } /** * @dev Throws if the sender is not the owner. */ function _checkOwner() internal view virtual { if (owner() != _msgSender()) { revert OwnableUnauthorizedAccount(_msgSender()); } } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby disabling any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { _transferOwnership(address(0)); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { if (newOwner == address(0)) { revert OwnableInvalidOwner(address(0)); } _transferOwnership(newOwner); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Internal function without access restriction. */ function _transferOwnership(address newOwner) internal virtual { OwnableStorage storage $ = _getOwnableStorage(); address oldOwner = $._owner; $._owner = newOwner; emit OwnershipTransferred(oldOwner, newOwner); } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol) pragma solidity ^0.8.20; /** * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect. * * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in * case an upgrade adds a module that needs to be initialized. * * For example: * * [.hljs-theme-light.nopadding] * ```solidity * contract MyToken is ERC20Upgradeable { * function initialize() initializer public { * __ERC20_init("MyToken", "MTK"); * } * } * * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable { * function initializeV2() reinitializer(2) public { * __ERC20Permit_init("MyToken"); * } * } * ``` * * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}. * * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity. * * [CAUTION] * ==== * Avoid leaving a contract uninitialized. * * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed: * * [.hljs-theme-light.nopadding] * ``` * /// @custom:oz-upgrades-unsafe-allow constructor * constructor() { * _disableInitializers(); * } * ``` * ==== */ abstract contract Initializable { /** * @dev Storage of the initializable contract. * * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions * when using with upgradeable contracts. * * @custom:storage-location erc7201:openzeppelin.storage.Initializable */ struct InitializableStorage { /** * @dev Indicates that the contract has been initialized. */ uint64 _initialized; /** * @dev Indicates that the contract is in the process of being initialized. */ bool _initializing; } // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff)) bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00; /** * @dev The contract is already initialized. */ error InvalidInitialization(); /** * @dev The contract is not initializing. */ error NotInitializing(); /** * @dev Triggered when the contract has been initialized or reinitialized. */ event Initialized(uint64 version); /** * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope, * `onlyInitializing` functions can be used to initialize parent contracts. * * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in * production. * * Emits an {Initialized} event. */ modifier initializer() { // solhint-disable-next-line var-name-mixedcase InitializableStorage storage $ = _getInitializableStorage(); // Cache values to avoid duplicated sloads bool isTopLevelCall = !$._initializing; uint64 initialized = $._initialized; // Allowed calls: // - initialSetup: the contract is not in the initializing state and no previous version was // initialized // - construction: the contract is initialized at version 1 (no reininitialization) and the // current contract is just being deployed bool initialSetup = initialized == 0 && isTopLevelCall; bool construction = initialized == 1 && address(this).code.length == 0; if (!initialSetup && !construction) { revert InvalidInitialization(); } $._initialized = 1; if (isTopLevelCall) { $._initializing = true; } _; if (isTopLevelCall) { $._initializing = false; emit Initialized(1); } } /** * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be * used to initialize parent contracts. * * A reinitializer may be used after the original initialization step. This is essential to configure modules that * are added through upgrades and that require initialization. * * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer` * cannot be nested. If one is invoked in the context of another, execution will revert. * * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in * a contract, executing them in the right order is up to the developer or operator. * * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization. * * Emits an {Initialized} event. */ modifier reinitializer(uint64 version) { // solhint-disable-next-line var-name-mixedcase InitializableStorage storage $ = _getInitializableStorage(); if ($._initializing || $._initialized >= version) { revert InvalidInitialization(); } $._initialized = version; $._initializing = true; _; $._initializing = false; emit Initialized(version); } /** * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the * {initializer} and {reinitializer} modifiers, directly or indirectly. */ modifier onlyInitializing() { _checkInitializing(); _; } /** * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}. */ function _checkInitializing() internal view virtual { if (!_isInitializing()) { revert NotInitializing(); } } /** * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call. * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized * to any version. It is recommended to use this to lock implementation contracts that are designed to be called * through proxies. * * Emits an {Initialized} event the first time it is successfully executed. */ function _disableInitializers() internal virtual { // solhint-disable-next-line var-name-mixedcase InitializableStorage storage $ = _getInitializableStorage(); if ($._initializing) { revert InvalidInitialization(); } if ($._initialized != type(uint64).max) { $._initialized = type(uint64).max; emit Initialized(type(uint64).max); } } /** * @dev Returns the highest version that has been initialized. See {reinitializer}. */ function _getInitializedVersion() internal view returns (uint64) { return _getInitializableStorage()._initialized; } /** * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}. */ function _isInitializing() internal view returns (bool) { return _getInitializableStorage()._initializing; } /** * @dev Returns a pointer to the storage namespace. */ // solhint-disable-next-line var-name-mixedcase function _getInitializableStorage() private pure returns (InitializableStorage storage $) { assembly { $.slot := INITIALIZABLE_STORAGE } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (token/common/ERC2981.sol) pragma solidity ^0.8.20; import {IERC2981} from "@openzeppelin/contracts/interfaces/IERC2981.sol"; import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol"; import {ERC165Upgradeable} from "../../utils/introspection/ERC165Upgradeable.sol"; import {Initializable} from "../../proxy/utils/Initializable.sol"; /** * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information. * * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first. * * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the * fee is specified in basis points by default. * * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported. */ abstract contract ERC2981Upgradeable is Initializable, IERC2981, ERC165Upgradeable { struct RoyaltyInfo { address receiver; uint96 royaltyFraction; } /// @custom:storage-location erc7201:openzeppelin.storage.ERC2981 struct ERC2981Storage { RoyaltyInfo _defaultRoyaltyInfo; mapping(uint256 tokenId => RoyaltyInfo) _tokenRoyaltyInfo; } // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC2981")) - 1)) & ~bytes32(uint256(0xff)) bytes32 private constant ERC2981StorageLocation = 0xdaedc9ab023613a7caf35e703657e986ccfad7e3eb0af93a2853f8d65dd86b00; function _getERC2981Storage() private pure returns (ERC2981Storage storage $) { assembly { $.slot := ERC2981StorageLocation } } /** * @dev The default royalty set is invalid (eg. (numerator / denominator) >= 1). */ error ERC2981InvalidDefaultRoyalty(uint256 numerator, uint256 denominator); /** * @dev The default royalty receiver is invalid. */ error ERC2981InvalidDefaultRoyaltyReceiver(address receiver); /** * @dev The royalty set for an specific `tokenId` is invalid (eg. (numerator / denominator) >= 1). */ error ERC2981InvalidTokenRoyalty(uint256 tokenId, uint256 numerator, uint256 denominator); /** * @dev The royalty receiver for `tokenId` is invalid. */ error ERC2981InvalidTokenRoyaltyReceiver(uint256 tokenId, address receiver); function __ERC2981_init() internal onlyInitializing { } function __ERC2981_init_unchained() internal onlyInitializing { } /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165Upgradeable) returns (bool) { return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId); } /** * @inheritdoc IERC2981 */ function royaltyInfo(uint256 tokenId, uint256 salePrice) public view virtual returns (address, uint256) { ERC2981Storage storage $ = _getERC2981Storage(); RoyaltyInfo memory royalty = $._tokenRoyaltyInfo[tokenId]; if (royalty.receiver == address(0)) { royalty = $._defaultRoyaltyInfo; } uint256 royaltyAmount = (salePrice * royalty.royaltyFraction) / _feeDenominator(); return (royalty.receiver, royaltyAmount); } /** * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an * override. */ function _feeDenominator() internal pure virtual returns (uint96) { return 10000; } /** * @dev Sets the royalty information that all ids in this contract will default to. * * Requirements: * * - `receiver` cannot be the zero address. * - `feeNumerator` cannot be greater than the fee denominator. */ function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual { ERC2981Storage storage $ = _getERC2981Storage(); uint256 denominator = _feeDenominator(); if (feeNumerator > denominator) { // Royalty fee will exceed the sale price revert ERC2981InvalidDefaultRoyalty(feeNumerator, denominator); } if (receiver == address(0)) { revert ERC2981InvalidDefaultRoyaltyReceiver(address(0)); } $._defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator); } /** * @dev Removes default royalty information. */ function _deleteDefaultRoyalty() internal virtual { ERC2981Storage storage $ = _getERC2981Storage(); delete $._defaultRoyaltyInfo; } /** * @dev Sets the royalty information for a specific token id, overriding the global default. * * Requirements: * * - `receiver` cannot be the zero address. * - `feeNumerator` cannot be greater than the fee denominator. */ function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual { ERC2981Storage storage $ = _getERC2981Storage(); uint256 denominator = _feeDenominator(); if (feeNumerator > denominator) { // Royalty fee will exceed the sale price revert ERC2981InvalidTokenRoyalty(tokenId, feeNumerator, denominator); } if (receiver == address(0)) { revert ERC2981InvalidTokenRoyaltyReceiver(tokenId, address(0)); } $._tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator); } /** * @dev Resets royalty information for the token id back to the global default. */ function _resetTokenRoyalty(uint256 tokenId) internal virtual { ERC2981Storage storage $ = _getERC2981Storage(); delete $._tokenRoyaltyInfo[tokenId]; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/ERC721.sol) pragma solidity ^0.8.20; import {IERC721} from "@openzeppelin/contracts/token/ERC721/IERC721.sol"; import {IERC721Receiver} from "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol"; import {IERC721Metadata} from "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol"; import {ContextUpgradeable} from "../../utils/ContextUpgradeable.sol"; import {Strings} from "@openzeppelin/contracts/utils/Strings.sol"; import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol"; import {ERC165Upgradeable} from "../../utils/introspection/ERC165Upgradeable.sol"; import {IERC721Errors} from "@openzeppelin/contracts/interfaces/draft-IERC6093.sol"; import {Initializable} from "../../proxy/utils/Initializable.sol"; /** * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including * the Metadata extension, but not including the Enumerable extension, which is available separately as * {ERC721Enumerable}. */ abstract contract ERC721Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC721, IERC721Metadata, IERC721Errors { using Strings for uint256; /// @custom:storage-location erc7201:openzeppelin.storage.ERC721 struct ERC721Storage { // Token name string _name; // Token symbol string _symbol; mapping(uint256 tokenId => address) _owners; mapping(address owner => uint256) _balances; mapping(uint256 tokenId => address) _tokenApprovals; mapping(address owner => mapping(address operator => bool)) _operatorApprovals; } // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC721")) - 1)) & ~bytes32(uint256(0xff)) bytes32 private constant ERC721StorageLocation = 0x80bb2b638cc20bc4d0a60d66940f3ab4a00c1d7b313497ca82fb0b4ab0079300; function _getERC721Storage() private pure returns (ERC721Storage storage $) { assembly { $.slot := ERC721StorageLocation } } /** * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection. */ function __ERC721_init(string memory name_, string memory symbol_) internal onlyInitializing { __ERC721_init_unchained(name_, symbol_); } function __ERC721_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing { ERC721Storage storage $ = _getERC721Storage(); $._name = name_; $._symbol = symbol_; } /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165) returns (bool) { return interfaceId == type(IERC721).interfaceId || interfaceId == type(IERC721Metadata).interfaceId || super.supportsInterface(interfaceId); } /** * @dev See {IERC721-balanceOf}. */ function balanceOf(address owner) public view virtual returns (uint256) { ERC721Storage storage $ = _getERC721Storage(); if (owner == address(0)) { revert ERC721InvalidOwner(address(0)); } return $._balances[owner]; } /** * @dev See {IERC721-ownerOf}. */ function ownerOf(uint256 tokenId) public view virtual returns (address) { return _requireOwned(tokenId); } /** * @dev See {IERC721Metadata-name}. */ function name() public view virtual returns (string memory) { ERC721Storage storage $ = _getERC721Storage(); return $._name; } /** * @dev See {IERC721Metadata-symbol}. */ function symbol() public view virtual returns (string memory) { ERC721Storage storage $ = _getERC721Storage(); return $._symbol; } /** * @dev See {IERC721Metadata-tokenURI}. */ function tokenURI(uint256 tokenId) public view virtual returns (string memory) { _requireOwned(tokenId); string memory baseURI = _baseURI(); return bytes(baseURI).length > 0 ? string.concat(baseURI, tokenId.toString()) : ""; } /** * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each * token will be the concatenation of the `baseURI` and the `tokenId`. Empty * by default, can be overridden in child contracts. */ function _baseURI() internal view virtual returns (string memory) { return ""; } /** * @dev See {IERC721-approve}. */ function approve(address to, uint256 tokenId) public virtual { _approve(to, tokenId, _msgSender()); } /** * @dev See {IERC721-getApproved}. */ function getApproved(uint256 tokenId) public view virtual returns (address) { _requireOwned(tokenId); return _getApproved(tokenId); } /** * @dev See {IERC721-setApprovalForAll}. */ function setApprovalForAll(address operator, bool approved) public virtual { _setApprovalForAll(_msgSender(), operator, approved); } /** * @dev See {IERC721-isApprovedForAll}. */ function isApprovedForAll(address owner, address operator) public view virtual returns (bool) { ERC721Storage storage $ = _getERC721Storage(); return $._operatorApprovals[owner][operator]; } /** * @dev See {IERC721-transferFrom}. */ function transferFrom(address from, address to, uint256 tokenId) public virtual { if (to == address(0)) { revert ERC721InvalidReceiver(address(0)); } // Setting an "auth" arguments enables the `_isAuthorized` check which verifies that the token exists // (from != 0). Therefore, it is not needed to verify that the return value is not 0 here. address previousOwner = _update(to, tokenId, _msgSender()); if (previousOwner != from) { revert ERC721IncorrectOwner(from, tokenId, previousOwner); } } /** * @dev See {IERC721-safeTransferFrom}. */ function safeTransferFrom(address from, address to, uint256 tokenId) public { safeTransferFrom(from, to, tokenId, ""); } /** * @dev See {IERC721-safeTransferFrom}. */ function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual { transferFrom(from, to, tokenId); _checkOnERC721Received(from, to, tokenId, data); } /** * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist * * IMPORTANT: Any overrides to this function that add ownership of tokens not tracked by the * core ERC721 logic MUST be matched with the use of {_increaseBalance} to keep balances * consistent with ownership. The invariant to preserve is that for any address `a` the value returned by * `balanceOf(a)` must be equal to the number of tokens such that `_ownerOf(tokenId)` is `a`. */ function _ownerOf(uint256 tokenId) internal view virtual returns (address) { ERC721Storage storage $ = _getERC721Storage(); return $._owners[tokenId]; } /** * @dev Returns the approved address for `tokenId`. Returns 0 if `tokenId` is not minted. */ function _getApproved(uint256 tokenId) internal view virtual returns (address) { ERC721Storage storage $ = _getERC721Storage(); return $._tokenApprovals[tokenId]; } /** * @dev Returns whether `spender` is allowed to manage `owner`'s tokens, or `tokenId` in * particular (ignoring whether it is owned by `owner`). * * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this * assumption. */ function _isAuthorized(address owner, address spender, uint256 tokenId) internal view virtual returns (bool) { return spender != address(0) && (owner == spender || isApprovedForAll(owner, spender) || _getApproved(tokenId) == spender); } /** * @dev Checks if `spender` can operate on `tokenId`, assuming the provided `owner` is the actual owner. * Reverts if `spender` does not have approval from the provided `owner` for the given token or for all its assets * the `spender` for the specific `tokenId`. * * WARNING: This function assumes that `owner` is the actual owner of `tokenId` and does not verify this * assumption. */ function _checkAuthorized(address owner, address spender, uint256 tokenId) internal view virtual { if (!_isAuthorized(owner, spender, tokenId)) { if (owner == address(0)) { revert ERC721NonexistentToken(tokenId); } else { revert ERC721InsufficientApproval(spender, tokenId); } } } /** * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override. * * NOTE: the value is limited to type(uint128).max. This protect against _balance overflow. It is unrealistic that * a uint256 would ever overflow from increments when these increments are bounded to uint128 values. * * WARNING: Increasing an account's balance using this function tends to be paired with an override of the * {_ownerOf} function to resolve the ownership of the corresponding tokens so that balances and ownership * remain consistent with one another. */ function _increaseBalance(address account, uint128 value) internal virtual { ERC721Storage storage $ = _getERC721Storage(); unchecked { $._balances[account] += value; } } /** * @dev Transfers `tokenId` from its current owner to `to`, or alternatively mints (or burns) if the current owner * (or `to`) is the zero address. Returns the owner of the `tokenId` before the update. * * The `auth` argument is optional. If the value passed is non 0, then this function will check that * `auth` is either the owner of the token, or approved to operate on the token (by the owner). * * Emits a {Transfer} event. * * NOTE: If overriding this function in a way that tracks balances, see also {_increaseBalance}. */ function _update(address to, uint256 tokenId, address auth) internal virtual returns (address) { ERC721Storage storage $ = _getERC721Storage(); address from = _ownerOf(tokenId); // Perform (optional) operator check if (auth != address(0)) { _checkAuthorized(from, auth, tokenId); } // Execute the update if (from != address(0)) { // Clear approval. No need to re-authorize or emit the Approval event _approve(address(0), tokenId, address(0), false); unchecked { $._balances[from] -= 1; } } if (to != address(0)) { unchecked { $._balances[to] += 1; } } $._owners[tokenId] = to; emit Transfer(from, to, tokenId); return from; } /** * @dev Mints `tokenId` and transfers it to `to`. * * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible * * Requirements: * * - `tokenId` must not exist. * - `to` cannot be the zero address. * * Emits a {Transfer} event. */ function _mint(address to, uint256 tokenId) internal { if (to == address(0)) { revert ERC721InvalidReceiver(address(0)); } address previousOwner = _update(to, tokenId, address(0)); if (previousOwner != address(0)) { revert ERC721InvalidSender(address(0)); } } /** * @dev Mints `tokenId`, transfers it to `to` and checks for `to` acceptance. * * Requirements: * * - `tokenId` must not exist. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function _safeMint(address to, uint256 tokenId) internal { _safeMint(to, tokenId, ""); } /** * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is * forwarded in {IERC721Receiver-onERC721Received} to contract recipients. */ function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual { _mint(to, tokenId); _checkOnERC721Received(address(0), to, tokenId, data); } /** * @dev Destroys `tokenId`. * The approval is cleared when the token is burned. * This is an internal function that does not check if the sender is authorized to operate on the token. * * Requirements: * * - `tokenId` must exist. * * Emits a {Transfer} event. */ function _burn(uint256 tokenId) internal { address previousOwner = _update(address(0), tokenId, address(0)); if (previousOwner == address(0)) { revert ERC721NonexistentToken(tokenId); } } /** * @dev Transfers `tokenId` from `from` to `to`. * As opposed to {transferFrom}, this imposes no restrictions on msg.sender. * * Requirements: * * - `to` cannot be the zero address. * - `tokenId` token must be owned by `from`. * * Emits a {Transfer} event. */ function _transfer(address from, address to, uint256 tokenId) internal { if (to == address(0)) { revert ERC721InvalidReceiver(address(0)); } address previousOwner = _update(to, tokenId, address(0)); if (previousOwner == address(0)) { revert ERC721NonexistentToken(tokenId); } else if (previousOwner != from) { revert ERC721IncorrectOwner(from, tokenId, previousOwner); } } /** * @dev Safely transfers `tokenId` token from `from` to `to`, checking that contract recipients * are aware of the ERC721 standard to prevent tokens from being forever locked. * * `data` is additional data, it has no specified format and it is sent in call to `to`. * * This internal function is like {safeTransferFrom} in the sense that it invokes * {IERC721Receiver-onERC721Received} on the receiver, and can be used to e.g. * implement alternative mechanisms to perform token transfer, such as signature-based. * * Requirements: * * - `tokenId` token must exist and be owned by `from`. * - `to` cannot be the zero address. * - `from` cannot be the zero address. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function _safeTransfer(address from, address to, uint256 tokenId) internal { _safeTransfer(from, to, tokenId, ""); } /** * @dev Same as {xref-ERC721-_safeTransfer-address-address-uint256-}[`_safeTransfer`], with an additional `data` parameter which is * forwarded in {IERC721Receiver-onERC721Received} to contract recipients. */ function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual { _transfer(from, to, tokenId); _checkOnERC721Received(from, to, tokenId, data); } /** * @dev Approve `to` to operate on `tokenId` * * The `auth` argument is optional. If the value passed is non 0, then this function will check that `auth` is * either the owner of the token, or approved to operate on all tokens held by this owner. * * Emits an {Approval} event. * * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument. */ function _approve(address to, uint256 tokenId, address auth) internal { _approve(to, tokenId, auth, true); } /** * @dev Variant of `_approve` with an optional flag to enable or disable the {Approval} event. The event is not * emitted in the context of transfers. */ function _approve(address to, uint256 tokenId, address auth, bool emitEvent) internal virtual { ERC721Storage storage $ = _getERC721Storage(); // Avoid reading the owner unless necessary if (emitEvent || auth != address(0)) { address owner = _requireOwned(tokenId); // We do not use _isAuthorized because single-token approvals should not be able to call approve if (auth != address(0) && owner != auth && !isApprovedForAll(owner, auth)) { revert ERC721InvalidApprover(auth); } if (emitEvent) { emit Approval(owner, to, tokenId); } } $._tokenApprovals[tokenId] = to; } /** * @dev Approve `operator` to operate on all of `owner` tokens * * Requirements: * - operator can't be the address zero. * * Emits an {ApprovalForAll} event. */ function _setApprovalForAll(address owner, address operator, bool approved) internal virtual { ERC721Storage storage $ = _getERC721Storage(); if (operator == address(0)) { revert ERC721InvalidOperator(operator); } $._operatorApprovals[owner][operator] = approved; emit ApprovalForAll(owner, operator, approved); } /** * @dev Reverts if the `tokenId` doesn't have a current owner (it hasn't been minted, or it has been burned). * Returns the owner. * * Overrides to ownership logic should be done to {_ownerOf}. */ function _requireOwned(uint256 tokenId) internal view returns (address) { address owner = _ownerOf(tokenId); if (owner == address(0)) { revert ERC721NonexistentToken(tokenId); } return owner; } /** * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target address. This will revert if the * recipient doesn't accept the token transfer. The call is not executed if the target address is not a contract. * * @param from address representing the previous owner of the given token ID * @param to target address that will receive the tokens * @param tokenId uint256 ID of the token to be transferred * @param data bytes optional data to send along with the call */ function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory data) private { if (to.code.length > 0) { try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) { if (retval != IERC721Receiver.onERC721Received.selector) { revert ERC721InvalidReceiver(to); } } catch (bytes memory reason) { if (reason.length == 0) { revert ERC721InvalidReceiver(to); } else { /// @solidity memory-safe-assembly assembly { revert(add(32, reason), mload(reason)) } } } } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/ERC721Royalty.sol) pragma solidity ^0.8.20; import {ERC721Upgradeable} from "../ERC721Upgradeable.sol"; import {ERC2981Upgradeable} from "../../common/ERC2981Upgradeable.sol"; import {Initializable} from "../../../proxy/utils/Initializable.sol"; /** * @dev Extension of ERC721 with the ERC2981 NFT Royalty Standard, a standardized way to retrieve royalty payment * information. * * Royalty information can be specified globally for all token ids via {ERC2981-_setDefaultRoyalty}, and/or individually * for specific token ids via {ERC2981-_setTokenRoyalty}. The latter takes precedence over the first. * * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported. */ abstract contract ERC721RoyaltyUpgradeable is Initializable, ERC2981Upgradeable, ERC721Upgradeable { function __ERC721Royalty_init() internal onlyInitializing { } function __ERC721Royalty_init_unchained() internal onlyInitializing { } /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721Upgradeable, ERC2981Upgradeable) returns (bool) { return super.supportsInterface(interfaceId); } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol) pragma solidity ^0.8.20; import {Initializable} from "../proxy/utils/Initializable.sol"; /** * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract ContextUpgradeable is Initializable { function __Context_init() internal onlyInitializing { } function __Context_init_unchained() internal onlyInitializing { } function _msgSender() internal view virtual returns (address) { return msg.sender; } function _msgData() internal view virtual returns (bytes calldata) { return msg.data; } function _contextSuffixLength() internal view virtual returns (uint256) { return 0; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol) pragma solidity ^0.8.20; import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol"; import {Initializable} from "../../proxy/utils/Initializable.sol"; /** * @dev Implementation of the {IERC165} interface. * * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check * for the additional interface id that will be supported. For example: * * ```solidity * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) { * return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId); * } * ``` */ abstract contract ERC165Upgradeable is Initializable, IERC165 { function __ERC165_init() internal onlyInitializing { } function __ERC165_init_unchained() internal onlyInitializing { } /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) { return interfaceId == type(IERC165).interfaceId; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol) pragma solidity ^0.8.20; import {Initializable} from "../proxy/utils/Initializable.sol"; /** * @dev Contract module that helps prevent reentrant calls to a function. * * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier * available, which can be applied to functions to make sure there are no nested * (reentrant) calls to them. * * Note that because there is a single `nonReentrant` guard, functions marked as * `nonReentrant` may not call one another. This can be worked around by making * those functions `private`, and then adding `external` `nonReentrant` entry * points to them. * * TIP: If you would like to learn more about reentrancy and alternative ways * to protect against it, check out our blog post * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul]. */ abstract contract ReentrancyGuardUpgradeable is Initializable { // Booleans are more expensive than uint256 or any type that takes up a full // word because each write operation emits an extra SLOAD to first read the // slot's contents, replace the bits taken up by the boolean, and then write // back. This is the compiler's defense against contract upgrades and // pointer aliasing, and it cannot be disabled. // The values being non-zero value makes deployment a bit more expensive, // but in exchange the refund on every call to nonReentrant will be lower in // amount. Since refunds are capped to a percentage of the total // transaction's gas, it is best to keep them low in cases like this one, to // increase the likelihood of the full refund coming into effect. uint256 private constant NOT_ENTERED = 1; uint256 private constant ENTERED = 2; /// @custom:storage-location erc7201:openzeppelin.storage.ReentrancyGuard struct ReentrancyGuardStorage { uint256 _status; } // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ReentrancyGuard")) - 1)) & ~bytes32(uint256(0xff)) bytes32 private constant ReentrancyGuardStorageLocation = 0x9b779b17422d0df92223018b32b4d1fa46e071723d6817e2486d003becc55f00; function _getReentrancyGuardStorage() private pure returns (ReentrancyGuardStorage storage $) { assembly { $.slot := ReentrancyGuardStorageLocation } } /** * @dev Unauthorized reentrant call. */ error ReentrancyGuardReentrantCall(); function __ReentrancyGuard_init() internal onlyInitializing { __ReentrancyGuard_init_unchained(); } function __ReentrancyGuard_init_unchained() internal onlyInitializing { ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage(); $._status = NOT_ENTERED; } /** * @dev Prevents a contract from calling itself, directly or indirectly. * Calling a `nonReentrant` function from another `nonReentrant` * function is not supported. It is possible to prevent this from happening * by making the `nonReentrant` function external, and making it call a * `private` function that does the actual work. */ modifier nonReentrant() { _nonReentrantBefore(); _; _nonReentrantAfter(); } function _nonReentrantBefore() private { ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage(); // On the first call to nonReentrant, _status will be NOT_ENTERED if ($._status == ENTERED) { revert ReentrancyGuardReentrantCall(); } // Any calls to nonReentrant after this point will fail $._status = ENTERED; } function _nonReentrantAfter() private { ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage(); // By storing the original value once again, a refund is triggered (see // https://eips.ethereum.org/EIPS/eip-2200) $._status = NOT_ENTERED; } /** * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a * `nonReentrant` function in the call stack. */ function _reentrancyGuardEntered() internal view returns (bool) { ReentrancyGuardStorage storage $ = _getReentrancyGuardStorage(); return $._status == ENTERED; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol) pragma solidity ^0.8.20; /** * @dev Standard ERC20 Errors * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens. */ interface IERC20Errors { /** * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers. * @param sender Address whose tokens are being transferred. * @param balance Current balance for the interacting account. * @param needed Minimum amount required to perform a transfer. */ error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed); /** * @dev Indicates a failure with the token `sender`. Used in transfers. * @param sender Address whose tokens are being transferred. */ error ERC20InvalidSender(address sender); /** * @dev Indicates a failure with the token `receiver`. Used in transfers. * @param receiver Address to which tokens are being transferred. */ error ERC20InvalidReceiver(address receiver); /** * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers. * @param spender Address that may be allowed to operate on tokens without being their owner. * @param allowance Amount of tokens a `spender` is allowed to operate with. * @param needed Minimum amount required to perform a transfer. */ error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed); /** * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals. * @param approver Address initiating an approval operation. */ error ERC20InvalidApprover(address approver); /** * @dev Indicates a failure with the `spender` to be approved. Used in approvals. * @param spender Address that may be allowed to operate on tokens without being their owner. */ error ERC20InvalidSpender(address spender); } /** * @dev Standard ERC721 Errors * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens. */ interface IERC721Errors { /** * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20. * Used in balance queries. * @param owner Address of the current owner of a token. */ error ERC721InvalidOwner(address owner); /** * @dev Indicates a `tokenId` whose `owner` is the zero address. * @param tokenId Identifier number of a token. */ error ERC721NonexistentToken(uint256 tokenId); /** * @dev Indicates an error related to the ownership over a particular token. Used in transfers. * @param sender Address whose tokens are being transferred. * @param tokenId Identifier number of a token. * @param owner Address of the current owner of a token. */ error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner); /** * @dev Indicates a failure with the token `sender`. Used in transfers. * @param sender Address whose tokens are being transferred. */ error ERC721InvalidSender(address sender); /** * @dev Indicates a failure with the token `receiver`. Used in transfers. * @param receiver Address to which tokens are being transferred. */ error ERC721InvalidReceiver(address receiver); /** * @dev Indicates a failure with the `operator`’s approval. Used in transfers. * @param operator Address that may be allowed to operate on tokens without being their owner. * @param tokenId Identifier number of a token. */ error ERC721InsufficientApproval(address operator, uint256 tokenId); /** * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals. * @param approver Address initiating an approval operation. */ error ERC721InvalidApprover(address approver); /** * @dev Indicates a failure with the `operator` to be approved. Used in approvals. * @param operator Address that may be allowed to operate on tokens without being their owner. */ error ERC721InvalidOperator(address operator); } /** * @dev Standard ERC1155 Errors * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens. */ interface IERC1155Errors { /** * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers. * @param sender Address whose tokens are being transferred. * @param balance Current balance for the interacting account. * @param needed Minimum amount required to perform a transfer. * @param tokenId Identifier number of a token. */ error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId); /** * @dev Indicates a failure with the token `sender`. Used in transfers. * @param sender Address whose tokens are being transferred. */ error ERC1155InvalidSender(address sender); /** * @dev Indicates a failure with the token `receiver`. Used in transfers. * @param receiver Address to which tokens are being transferred. */ error ERC1155InvalidReceiver(address receiver); /** * @dev Indicates a failure with the `operator`’s approval. Used in transfers. * @param operator Address that may be allowed to operate on tokens without being their owner. * @param owner Address of the current owner of a token. */ error ERC1155MissingApprovalForAll(address operator, address owner); /** * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals. * @param approver Address initiating an approval operation. */ error ERC1155InvalidApprover(address approver); /** * @dev Indicates a failure with the `operator` to be approved. Used in approvals. * @param operator Address that may be allowed to operate on tokens without being their owner. */ error ERC1155InvalidOperator(address operator); /** * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation. * Used in batch transfers. * @param idsLength Length of the array of token identifiers * @param valuesLength Length of the array of token amounts */ error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC2981.sol) pragma solidity ^0.8.20; import {IERC165} from "../utils/introspection/IERC165.sol"; /** * @dev Interface for the NFT Royalty Standard. * * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal * support for royalty payments across all NFT marketplaces and ecosystem participants. */ interface IERC2981 is IERC165 { /** * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of * exchange. The royalty amount is denominated and should be paid in that same unit of exchange. */ function royaltyInfo( uint256 tokenId, uint256 salePrice ) external view returns (address receiver, uint256 royaltyAmount); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC721.sol) pragma solidity ^0.8.20; import {IERC721} from "../token/ERC721/IERC721.sol";
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol) pragma solidity ^0.8.20; /** * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612]. * * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't * need to send a transaction, and thus is not required to hold Ether at all. * * ==== Security Considerations * * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be * considered as an intention to spend the allowance in any specific way. The second is that because permits have * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be * generally recommended is: * * ```solidity * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public { * try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {} * doThing(..., value); * } * * function doThing(..., uint256 value) public { * token.safeTransferFrom(msg.sender, address(this), value); * ... * } * ``` * * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also * {SafeERC20-safeTransferFrom}). * * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so * contracts should have entry points that don't rely on permit. */ interface IERC20Permit { /** * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens, * given ``owner``'s signed approval. * * IMPORTANT: The same issues {IERC20-approve} has related to transaction * ordering also apply here. * * Emits an {Approval} event. * * Requirements: * * - `spender` cannot be the zero address. * - `deadline` must be a timestamp in the future. * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner` * over the EIP712-formatted function arguments. * - the signature must use ``owner``'s current nonce (see {nonces}). * * For more information on the signature format, see the * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP * section]. * * CAUTION: See Security Considerations above. */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @dev Returns the current nonce for `owner`. This value must be * included whenever a signature is generated for {permit}. * * Every successful call to {permit} increases ``owner``'s nonce by one. This * prevents a signature from being used multiple times. */ function nonces(address owner) external view returns (uint256); /** * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}. */ // solhint-disable-next-line func-name-mixedcase function DOMAIN_SEPARATOR() external view returns (bytes32); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol) pragma solidity ^0.8.20; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); /** * @dev Returns the value of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the value of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves a `value` amount of tokens from the caller's account to `to`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address to, uint256 value) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets a `value` amount of tokens as the allowance of `spender` over the * caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 value) external returns (bool); /** * @dev Moves a `value` amount of tokens from `from` to `to` using the * allowance mechanism. `value` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address from, address to, uint256 value) external returns (bool); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol) pragma solidity ^0.8.20; import {IERC20} from "../IERC20.sol"; import {IERC20Permit} from "../extensions/IERC20Permit.sol"; import {Address} from "../../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using Address for address; /** * @dev An operation with an ERC20 token failed. */ error SafeERC20FailedOperation(address token); /** * @dev Indicates a failed `decreaseAllowance` request. */ error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease); /** * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeTransfer(IERC20 token, address to, uint256 value) internal { _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value))); } /** * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful. */ function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal { _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value))); } /** * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. */ function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal { uint256 oldAllowance = token.allowance(address(this), spender); forceApprove(token, spender, oldAllowance + value); } /** * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no * value, non-reverting calls are assumed to be successful. */ function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal { unchecked { uint256 currentAllowance = token.allowance(address(this), spender); if (currentAllowance < requestedDecrease) { revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease); } forceApprove(token, spender, currentAllowance - requestedDecrease); } } /** * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value, * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval * to be set to zero before setting it to a non-zero value, such as USDT. */ function forceApprove(IERC20 token, address spender, uint256 value) internal { bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value)); if (!_callOptionalReturnBool(token, approvalCall)) { _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0))); _callOptionalReturn(token, approvalCall); } } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data); if (returndata.length != 0 && !abi.decode(returndata, (bool))) { revert SafeERC20FailedOperation(address(token)); } } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). * * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead. */ function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false // and not revert is the subcall reverts. (bool success, bytes memory returndata) = address(token).call(data); return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/extensions/IERC721Metadata.sol) pragma solidity ^0.8.20; import {IERC721} from "../IERC721.sol"; /** * @title ERC-721 Non-Fungible Token Standard, optional metadata extension * @dev See https://eips.ethereum.org/EIPS/eip-721 */ interface IERC721Metadata is IERC721 { /** * @dev Returns the token collection name. */ function name() external view returns (string memory); /** * @dev Returns the token collection symbol. */ function symbol() external view returns (string memory); /** * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token. */ function tokenURI(uint256 tokenId) external view returns (string memory); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol) pragma solidity ^0.8.20; import {IERC165} from "../../utils/introspection/IERC165.sol"; /** * @dev Required interface of an ERC721 compliant contract. */ interface IERC721 is IERC165 { /** * @dev Emitted when `tokenId` token is transferred from `from` to `to`. */ event Transfer(address indexed from, address indexed to, uint256 indexed tokenId); /** * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token. */ event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId); /** * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets. */ event ApprovalForAll(address indexed owner, address indexed operator, bool approved); /** * @dev Returns the number of tokens in ``owner``'s account. */ function balanceOf(address owner) external view returns (uint256 balance); /** * @dev Returns the owner of the `tokenId` token. * * Requirements: * * - `tokenId` must exist. */ function ownerOf(uint256 tokenId) external view returns (address owner); /** * @dev Safely transfers `tokenId` token from `from` to `to`. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon * a safe transfer. * * Emits a {Transfer} event. */ function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external; /** * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients * are aware of the ERC721 protocol to prevent tokens from being forever locked. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or * {setApprovalForAll}. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon * a safe transfer. * * Emits a {Transfer} event. */ function safeTransferFrom(address from, address to, uint256 tokenId) external; /** * @dev Transfers `tokenId` token from `from` to `to`. * * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721 * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must * understand this adds an external call which potentially creates a reentrancy vulnerability. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must be owned by `from`. * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}. * * Emits a {Transfer} event. */ function transferFrom(address from, address to, uint256 tokenId) external; /** * @dev Gives permission to `to` to transfer `tokenId` token to another account. * The approval is cleared when the token is transferred. * * Only a single account can be approved at a time, so approving the zero address clears previous approvals. * * Requirements: * * - The caller must own the token or be an approved operator. * - `tokenId` must exist. * * Emits an {Approval} event. */ function approve(address to, uint256 tokenId) external; /** * @dev Approve or remove `operator` as an operator for the caller. * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller. * * Requirements: * * - The `operator` cannot be the address zero. * * Emits an {ApprovalForAll} event. */ function setApprovalForAll(address operator, bool approved) external; /** * @dev Returns the account approved for `tokenId` token. * * Requirements: * * - `tokenId` must exist. */ function getApproved(uint256 tokenId) external view returns (address operator); /** * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`. * * See {setApprovalForAll} */ function isApprovedForAll(address owner, address operator) external view returns (bool); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol) pragma solidity ^0.8.20; /** * @title ERC721 token receiver interface * @dev Interface for any contract that wants to support safeTransfers * from ERC721 asset contracts. */ interface IERC721Receiver { /** * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom} * by `operator` from `from`, this function is called. * * It must return its Solidity selector to confirm the token transfer. * If any other value is returned or the interface is not implemented by the recipient, the transfer will be * reverted. * * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`. */ function onERC721Received( address operator, address from, uint256 tokenId, bytes calldata data ) external returns (bytes4); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol) pragma solidity ^0.8.20; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev The ETH balance of the account is not enough to perform the operation. */ error AddressInsufficientBalance(address account); /** * @dev There's no code at `target` (it is not a contract). */ error AddressEmptyCode(address target); /** * @dev A call to an address target failed. The target may have reverted. */ error FailedInnerCall(); /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { if (address(this).balance < amount) { revert AddressInsufficientBalance(address(this)); } (bool success, ) = recipient.call{value: amount}(""); if (!success) { revert FailedInnerCall(); } } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason or custom error, it is bubbled * up by this function (like regular Solidity function calls). However, if * the call reverted with no returned reason, this function reverts with a * {FailedInnerCall} error. * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCallWithValue(target, data, 0); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { if (address(this).balance < value) { revert AddressInsufficientBalance(address(this)); } (bool success, bytes memory returndata) = target.call{value: value}(data); return verifyCallResultFromTarget(target, success, returndata); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { (bool success, bytes memory returndata) = target.staticcall(data); return verifyCallResultFromTarget(target, success, returndata); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { (bool success, bytes memory returndata) = target.delegatecall(data); return verifyCallResultFromTarget(target, success, returndata); } /** * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an * unsuccessful call. */ function verifyCallResultFromTarget( address target, bool success, bytes memory returndata ) internal view returns (bytes memory) { if (!success) { _revert(returndata); } else { // only check if target is a contract if the call was successful and the return data is empty // otherwise we already know that it was a contract if (returndata.length == 0 && target.code.length == 0) { revert AddressEmptyCode(target); } return returndata; } } /** * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the * revert reason or with a default {FailedInnerCall} error. */ function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) { if (!success) { _revert(returndata); } else { return returndata; } } /** * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}. */ function _revert(bytes memory returndata) private pure { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly /// @solidity memory-safe-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert FailedInnerCall(); } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol) pragma solidity ^0.8.20; /** * @dev Interface of the ERC165 standard, as defined in the * https://eips.ethereum.org/EIPS/eip-165[EIP]. * * Implementers can declare support of contract interfaces, which can then be * queried by others ({ERC165Checker}). * * For an implementation, see {ERC165}. */ interface IERC165 { /** * @dev Returns true if this contract implements the interface defined by * `interfaceId`. See the corresponding * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section] * to learn more about how these ids are created. * * This function call must use less than 30 000 gas. */ function supportsInterface(bytes4 interfaceId) external view returns (bool); }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol) pragma solidity ^0.8.20; /** * @dev Standard math utilities missing in the Solidity language. */ library Math { /** * @dev Muldiv operation overflow. */ error MathOverflowedMulDiv(); enum Rounding { Floor, // Toward negative infinity Ceil, // Toward positive infinity Trunc, // Toward zero Expand // Away from zero } /** * @dev Returns the addition of two unsigned integers, with an overflow flag. */ function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { uint256 c = a + b; if (c < a) return (false, 0); return (true, c); } } /** * @dev Returns the subtraction of two unsigned integers, with an overflow flag. */ function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { if (b > a) return (false, 0); return (true, a - b); } } /** * @dev Returns the multiplication of two unsigned integers, with an overflow flag. */ function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) return (true, 0); uint256 c = a * b; if (c / a != b) return (false, 0); return (true, c); } } /** * @dev Returns the division of two unsigned integers, with a division by zero flag. */ function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { if (b == 0) return (false, 0); return (true, a / b); } } /** * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag. */ function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) { unchecked { if (b == 0) return (false, 0); return (true, a % b); } } /** * @dev Returns the largest of two numbers. */ function max(uint256 a, uint256 b) internal pure returns (uint256) { return a > b ? a : b; } /** * @dev Returns the smallest of two numbers. */ function min(uint256 a, uint256 b) internal pure returns (uint256) { return a < b ? a : b; } /** * @dev Returns the average of two numbers. The result is rounded towards * zero. */ function average(uint256 a, uint256 b) internal pure returns (uint256) { // (a + b) / 2 can overflow. return (a & b) + (a ^ b) / 2; } /** * @dev Returns the ceiling of the division of two numbers. * * This differs from standard division with `/` in that it rounds towards infinity instead * of rounding towards zero. */ function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) { if (b == 0) { // Guarantee the same behavior as in a regular Solidity division. return a / b; } // (a + b - 1) / b can overflow on addition, so we distribute. return a == 0 ? 0 : (a - 1) / b + 1; } /** * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or * denominator == 0. * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by * Uniswap Labs also under MIT license. */ function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) { unchecked { // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256 // variables such that product = prod1 * 2^256 + prod0. uint256 prod0 = x * y; // Least significant 256 bits of the product uint256 prod1; // Most significant 256 bits of the product assembly { let mm := mulmod(x, y, not(0)) prod1 := sub(sub(mm, prod0), lt(mm, prod0)) } // Handle non-overflow cases, 256 by 256 division. if (prod1 == 0) { // Solidity will revert if denominator == 0, unlike the div opcode on its own. // The surrounding unchecked block does not change this fact. // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic. return prod0 / denominator; } // Make sure the result is less than 2^256. Also prevents denominator == 0. if (denominator <= prod1) { revert MathOverflowedMulDiv(); } /////////////////////////////////////////////// // 512 by 256 division. /////////////////////////////////////////////// // Make division exact by subtracting the remainder from [prod1 prod0]. uint256 remainder; assembly { // Compute remainder using mulmod. remainder := mulmod(x, y, denominator) // Subtract 256 bit number from 512 bit number. prod1 := sub(prod1, gt(remainder, prod0)) prod0 := sub(prod0, remainder) } // Factor powers of two out of denominator and compute largest power of two divisor of denominator. // Always >= 1. See https://cs.stackexchange.com/q/138556/92363. uint256 twos = denominator & (0 - denominator); assembly { // Divide denominator by twos. denominator := div(denominator, twos) // Divide [prod1 prod0] by twos. prod0 := div(prod0, twos) // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one. twos := add(div(sub(0, twos), twos), 1) } // Shift in bits from prod1 into prod0. prod0 |= prod1 * twos; // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for // four bits. That is, denominator * inv = 1 mod 2^4. uint256 inverse = (3 * denominator) ^ 2; // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also // works in modular arithmetic, doubling the correct bits in each step. inverse *= 2 - denominator * inverse; // inverse mod 2^8 inverse *= 2 - denominator * inverse; // inverse mod 2^16 inverse *= 2 - denominator * inverse; // inverse mod 2^32 inverse *= 2 - denominator * inverse; // inverse mod 2^64 inverse *= 2 - denominator * inverse; // inverse mod 2^128 inverse *= 2 - denominator * inverse; // inverse mod 2^256 // Because the division is now exact we can divide by multiplying with the modular inverse of denominator. // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1 // is no longer required. result = prod0 * inverse; return result; } } /** * @notice Calculates x * y / denominator with full precision, following the selected rounding direction. */ function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) { uint256 result = mulDiv(x, y, denominator); if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) { result += 1; } return result; } /** * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded * towards zero. * * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11). */ function sqrt(uint256 a) internal pure returns (uint256) { if (a == 0) { return 0; } // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target. // // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`. // // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)` // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))` // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)` // // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit. uint256 result = 1 << (log2(a) >> 1); // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128, // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision // into the expected uint128 result. unchecked { result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; result = (result + a / result) >> 1; return min(result, a / result); } } /** * @notice Calculates sqrt(a), following the selected rounding direction. */ function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = sqrt(a); return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0); } } /** * @dev Return the log in base 2 of a positive value rounded towards zero. * Returns 0 if given 0. */ function log2(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >> 128 > 0) { value >>= 128; result += 128; } if (value >> 64 > 0) { value >>= 64; result += 64; } if (value >> 32 > 0) { value >>= 32; result += 32; } if (value >> 16 > 0) { value >>= 16; result += 16; } if (value >> 8 > 0) { value >>= 8; result += 8; } if (value >> 4 > 0) { value >>= 4; result += 4; } if (value >> 2 > 0) { value >>= 2; result += 2; } if (value >> 1 > 0) { result += 1; } } return result; } /** * @dev Return the log in base 2, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log2(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log2(value); return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0); } } /** * @dev Return the log in base 10 of a positive value rounded towards zero. * Returns 0 if given 0. */ function log10(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >= 10 ** 64) { value /= 10 ** 64; result += 64; } if (value >= 10 ** 32) { value /= 10 ** 32; result += 32; } if (value >= 10 ** 16) { value /= 10 ** 16; result += 16; } if (value >= 10 ** 8) { value /= 10 ** 8; result += 8; } if (value >= 10 ** 4) { value /= 10 ** 4; result += 4; } if (value >= 10 ** 2) { value /= 10 ** 2; result += 2; } if (value >= 10 ** 1) { result += 1; } } return result; } /** * @dev Return the log in base 10, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log10(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log10(value); return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0); } } /** * @dev Return the log in base 256 of a positive value rounded towards zero. * Returns 0 if given 0. * * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string. */ function log256(uint256 value) internal pure returns (uint256) { uint256 result = 0; unchecked { if (value >> 128 > 0) { value >>= 128; result += 16; } if (value >> 64 > 0) { value >>= 64; result += 8; } if (value >> 32 > 0) { value >>= 32; result += 4; } if (value >> 16 > 0) { value >>= 16; result += 2; } if (value >> 8 > 0) { result += 1; } } return result; } /** * @dev Return the log in base 256, following the selected rounding direction, of a positive value. * Returns 0 if given 0. */ function log256(uint256 value, Rounding rounding) internal pure returns (uint256) { unchecked { uint256 result = log256(value); return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0); } } /** * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers. */ function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) { return uint8(rounding) % 2 == 1; } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol) pragma solidity ^0.8.20; /** * @dev Standard signed math utilities missing in the Solidity language. */ library SignedMath { /** * @dev Returns the largest of two signed numbers. */ function max(int256 a, int256 b) internal pure returns (int256) { return a > b ? a : b; } /** * @dev Returns the smallest of two signed numbers. */ function min(int256 a, int256 b) internal pure returns (int256) { return a < b ? a : b; } /** * @dev Returns the average of two signed numbers without overflow. * The result is rounded towards zero. */ function average(int256 a, int256 b) internal pure returns (int256) { // Formula from the book "Hacker's Delight" int256 x = (a & b) + ((a ^ b) >> 1); return x + (int256(uint256(x) >> 255) & (a ^ b)); } /** * @dev Returns the absolute unsigned value of a signed value. */ function abs(int256 n) internal pure returns (uint256) { unchecked { // must be unchecked in order to support `n = type(int256).min` return uint256(n >= 0 ? n : -n); } } }
// SPDX-License-Identifier: MIT // OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol) pragma solidity ^0.8.20; import {Math} from "./math/Math.sol"; import {SignedMath} from "./math/SignedMath.sol"; /** * @dev String operations. */ library Strings { bytes16 private constant HEX_DIGITS = "0123456789abcdef"; uint8 private constant ADDRESS_LENGTH = 20; /** * @dev The `value` string doesn't fit in the specified `length`. */ error StringsInsufficientHexLength(uint256 value, uint256 length); /** * @dev Converts a `uint256` to its ASCII `string` decimal representation. */ function toString(uint256 value) internal pure returns (string memory) { unchecked { uint256 length = Math.log10(value) + 1; string memory buffer = new string(length); uint256 ptr; /// @solidity memory-safe-assembly assembly { ptr := add(buffer, add(32, length)) } while (true) { ptr--; /// @solidity memory-safe-assembly assembly { mstore8(ptr, byte(mod(value, 10), HEX_DIGITS)) } value /= 10; if (value == 0) break; } return buffer; } } /** * @dev Converts a `int256` to its ASCII `string` decimal representation. */ function toStringSigned(int256 value) internal pure returns (string memory) { return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value))); } /** * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation. */ function toHexString(uint256 value) internal pure returns (string memory) { unchecked { return toHexString(value, Math.log256(value) + 1); } } /** * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length. */ function toHexString(uint256 value, uint256 length) internal pure returns (string memory) { uint256 localValue = value; bytes memory buffer = new bytes(2 * length + 2); buffer[0] = "0"; buffer[1] = "x"; for (uint256 i = 2 * length + 1; i > 1; --i) { buffer[i] = HEX_DIGITS[localValue & 0xf]; localValue >>= 4; } if (localValue != 0) { revert StringsInsufficientHexLength(value, length); } return string(buffer); } /** * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal * representation. */ function toHexString(address addr) internal pure returns (string memory) { return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH); } /** * @dev Returns true if the two strings are equal. */ function equal(string memory a, string memory b) internal pure returns (bool) { return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b)); } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.20; import "./IERC4907.sol"; import "@openzeppelin/contracts/interfaces/IERC721.sol"; import "@openzeppelin/contracts/interfaces/IERC2981.sol"; interface IDSponsorNFTBase { /* **************** * STRUCTS *****************/ /// @dev Struct to initialize a DSponsorNFT contract struct InitParams { /// @notice ERC721 name of the contract string name; /// @notice ERC721 symbol of the contract string symbol; /// @notice Base URI for the tokens metadata string baseURI; /// @notice URI linking to the contract metadata string contractURI; /// @notice Restrict mint to deployer (expect to be DSponsorAdmin address) address minter; /// @notice Immutable maximum supply of tokens uint256 maxSupply; /// @notice Address of the forwarder contract (EIP-2771) address forwarder; /// @notice Address of the initial owner, who will have admin rights and get royalties address initialOwner; /// @notice Percentage of royalties to be paid to the owner on secondary sales (in basis points, 400 means 4%) uint96 royaltyBps; /// @notice Addresses of the ERC20 tokens accepted for payment to mint tokens address[] currencies; /// @notice Prices for minting tokens, indexed by currencies addresses uint256[] prices; /// @notice List of token IDs that are allowed to be minted (empty array means all tokens are allowed) uint256[] allowedTokenIds; } /// @dev Struct detailing the mint price settings for a token struct MintPriceSettings { /// @notice Indicates whether the currency is enabled bool enabled; /// @notice Price to mint the token in the currency uint256 amount; } /* **************** * ERRORS *****************/ error AlreadyMinted(uint256 tokenId); error AmountValueTooLow(uint256 value); error CannotBeZeroAddress(); error ForbiddenCurrency(address currency); error InvalidInputLengths(); error InvalidPricingStructure(address[] currencies, uint256[] prices); error MaxSupplyExceeded(); error MaxSupplyShouldBeGreaterThan0(); error UnauthorizedToMint(); error TokenNotAllowed(uint256 tokenId); /* **************** * EVENTS *****************/ /// @dev ERC-4906 events event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId); event MetadataUpdated(uint256 indexed tokenId); event ContractURIUpdated(string contractURI); event ContractURIUpdated(); event Mint( uint256 tokenId, address indexed from, address indexed to, address indexed currency, uint256 amount, string tokenData ); event RoyaltySet(address receiver, uint96 bps); event TokensAllowlist(bool indexed allowed); event TokensAllowlistUpdated(uint256 tokenId, bool indexed allowed); event UpdateDefaultMintPrice( address indexed currency, bool indexed enabled, uint256 indexed amount ); event UpdateMintPrice( uint256 tokenId, address indexed currency, bool indexed enabled, uint256 indexed amount ); /* **************** * FUNCTIONS *****************/ function MAX_SUPPLY() external view returns (uint256); function baseURI() external view returns (string memory); function contractURI() external view returns (string memory); function totalSupply() external view returns (uint256); function mint( uint256 tokenId, address to, address currency, string calldata tokenData ) external payable; function setBaseURI(string memory URI) external; function setContractURI(string memory URI) external; function setDefaultMintPrice( address currency, bool enabled, uint256 amount ) external; function setMintPrice( uint256 tokenId, address currency, bool enabled, uint256 amount ) external; function setRoyalty(address receiver, uint96 bps) external; function setTokensAllowlist(bool _applyTokensAllowlist) external; function setTokensAreAllowed( uint256[] calldata tokenIds, bool[] calldata allowed ) external; function setTokenURI(uint256 tokenId, string memory URI) external; function setTokenURIs( uint256[] calldata _tokenIds, string[] calldata _tokenURIs ) external; function getMintPrice( uint256 tokenId, address currency ) external view returns (bool, uint256); function getOwner() external view returns (address); function tokenIdIsAllowedToMint( uint256 tokenId ) external view returns (bool); } interface IDSponsorNFT is IDSponsorNFTBase, IERC721, IERC2981, IERC4907 {}
// SPDX-License-Identifier: CC0-1.0 pragma solidity ^0.8.20; interface IERC4907 { // Logged when the user of a token assigns a new user or updates expires /// @notice Emitted when the `user` of an NFT or the `expires` of the `user` is changed /// The zero address for user indicates that there is no user address event UpdateUser( uint256 indexed tokenId, address indexed user, uint256 expires ); /// @notice set the user and expires of a NFT /// @dev The zero address indicates there is no user /// Throws if `tokenId` is not valid NFT /// @param user The new user of the NFT /// @param expires UNIX timestamp, The new user could use the NFT before expires function setUser(uint256 tokenId, address user, uint64 expires) external; /// @notice Get the user address of an NFT /// @dev The zero address indicates that there is no user or the user is expired /// @param tokenId The NFT to get the user address for /// @return The user address for this NFT function userOf(uint256 tokenId) external view returns (address); /// @notice Get the user expires of an NFT /// @dev The zero value indicates that there is no user /// @param tokenId The NFT to get the user expires for /// @return The user expires for this NFT function userExpires(uint256 tokenId) external view returns (uint256); }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.20; import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol"; import "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol"; import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol"; /** * @title ERC2771ContextUpgradeable * @author Anthony Gourraud * @notice Enable gasless transactions using EIP2771 Approach, forwarder can be updated by owner */ abstract contract ERC2771ContextUpgradeable is Initializable, ContextUpgradeable, OwnableUpgradeable { address private _trustedForwarder; function __ERC2771Context_init( address forwarder, address initialOwner ) internal onlyInitializing { __Ownable_init_unchained(initialOwner); __Context_init_unchained(); __ERC2771Context_init_unchained(forwarder); } function __ERC2771Context_init_unchained( address forwarder ) internal onlyInitializing { _trustedForwarder = forwarder; } /** * @dev Update the address of the trusted forwarder. */ function setTrustedForwarder(address forwarder) external onlyOwner { // slither-disable-next-line missing-zero-check _trustedForwarder = forwarder; } /** * @dev Returns the address of the trusted forwarder. */ function trustedForwarder() public view returns (address) { return _trustedForwarder; } /** * @dev Indicates whether any particular address is the trusted forwarder. */ function isTrustedForwarder( address forwarder ) public view virtual returns (bool) { return forwarder == trustedForwarder(); } /** * @dev Override for `msg.sender`. Defaults to the original `msg.sender` whenever * a call is not performed by the trusted forwarder or the calldata length is less than * 20 bytes (an address length). */ function _msgSender() internal view virtual override returns (address) { uint256 calldataLength = msg.data.length; uint256 contextSuffixLength = _contextSuffixLength(); if ( isTrustedForwarder(msg.sender) && calldataLength >= contextSuffixLength ) { return address( bytes20(msg.data[calldataLength - contextSuffixLength:]) ); } else { return super._msgSender(); } } /** * @dev Override for `msg.data`. Defaults to the original `msg.data` whenever * a call is not performed by the trusted forwarder or the calldata length is less than * 20 bytes (an address length). */ function _msgData() internal view virtual override returns (bytes calldata) { uint256 calldataLength = msg.data.length; uint256 contextSuffixLength = _contextSuffixLength(); if ( isTrustedForwarder(msg.sender) && calldataLength >= contextSuffixLength ) { return msg.data[:calldataLength - contextSuffixLength]; } else { return super._msgData(); } } /** * @dev ERC-2771 specifies the context as being a single address (20 bytes). */ function _contextSuffixLength() internal view virtual override returns (uint256) { return 20; } }
// SPDX-License-Identifier: CC0-1.0 pragma solidity ^0.8.20; import "../interfaces/IERC4907.sol"; import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol"; import "@openzeppelin/contracts-upgradeable/token/ERC721/ERC721Upgradeable.sol"; abstract contract ERC4907Upgradeable is IERC4907, Initializable, ERC721Upgradeable { struct UserInfo { address user; // user (tenant) address uint256 expires; // rental expiration timestamp } error UnauthorizedUserOperation(); mapping(uint256 => UserInfo) internal _users; function __ERC4907_init( string memory name, string memory symbol ) internal onlyInitializing { __ERC721_init_unchained(name, symbol); __ERC4907_init_unchained(); } function __ERC4907_init_unchained() internal onlyInitializing {} /** @notice Specify who can use an NFT as a "user" (tenant). * If not rented yet or when the expiration date is reached, * the approved spenders and owner can set a new user. * When rented, the user and users' approved operated can change the user address - but cannot extend the expiration date. * * @dev The zero address indicates there is no user. Throws if `tokenId` is not valid NFT * * @param user The new user of the NFT * @param expires UNIX timestamp, the new user could use the NFT before expires */ function setUser( uint256 tokenId, address user, uint64 expires ) public virtual override { address currentUser = userOf(tokenId); address owner = ownerOf(tokenId); if (currentUser == address(0) || currentUser == owner) { _checkAuthorized(owner, _msgSender(), tokenId); } else { if ( (currentUser != _msgSender() && isApprovedForAll(currentUser, _msgSender()) == false) || (userExpires(tokenId) < expires) ) { revert UnauthorizedUserOperation(); } } UserInfo storage info = _users[tokenId]; info.user = user; info.expires = expires; emit UpdateUser(tokenId, user, expires); } /// @notice Get the user address of an NFT /// @dev The zero address indicates that there is no user or the user is expired /// @param tokenId The NFT to get the user address for /// @return The user address for this NFT function userOf( uint256 tokenId ) public view virtual override returns (address) { if (_users[tokenId].expires >= block.timestamp) { return _users[tokenId].user; } else { return address(0); } } /// @notice Get the user expires of an NFT /// @dev The zero value indicates that there is no user /// @param tokenId The NFT to get the user expires for /// @return The user expires for this NFT function userExpires( uint256 tokenId ) public view virtual override returns (uint256) { return _users[tokenId].expires; } /// @dev See {IERC165-supportsInterface}. function supportsInterface( bytes4 interfaceId ) public view virtual override returns (bool) { return interfaceId == type(IERC4907).interfaceId || super.supportsInterface(interfaceId); } }
{ "optimizer": { "enabled": true, "runs": 200, "details": { "yul": true } }, "viaIR": false, "evmVersion": "paris", "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } }, "libraries": {} }
[{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"AlreadyMinted","type":"error"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"}],"name":"AmountValueTooLow","type":"error"},{"inputs":[],"name":"CannotBeZeroAddress","type":"error"},{"inputs":[{"internalType":"uint256","name":"numerator","type":"uint256"},{"internalType":"uint256","name":"denominator","type":"uint256"}],"name":"ERC2981InvalidDefaultRoyalty","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC2981InvalidDefaultRoyaltyReceiver","type":"error"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"numerator","type":"uint256"},{"internalType":"uint256","name":"denominator","type":"uint256"}],"name":"ERC2981InvalidTokenRoyalty","type":"error"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC2981InvalidTokenRoyaltyReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"owner","type":"address"}],"name":"ERC721IncorrectOwner","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ERC721InsufficientApproval","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC721InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"}],"name":"ERC721InvalidOperator","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"ERC721InvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC721InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC721InvalidSender","type":"error"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ERC721NonexistentToken","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"address","name":"currency","type":"address"}],"name":"ForbiddenCurrency","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"InvalidInputLengths","type":"error"},{"inputs":[{"internalType":"address[]","name":"currencies","type":"address[]"},{"internalType":"uint256[]","name":"prices","type":"uint256[]"}],"name":"InvalidPricingStructure","type":"error"},{"inputs":[],"name":"MaxSupplyExceeded","type":"error"},{"inputs":[],"name":"MaxSupplyShouldBeGreaterThan0","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"length","type":"uint256"}],"name":"StringsInsufficientHexLength","type":"error"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"TokenNotAllowed","type":"error"},{"inputs":[],"name":"UnauthorizedToMint","type":"error"},{"inputs":[],"name":"UnauthorizedUserOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_fromTokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_toTokenId","type":"uint256"}],"name":"BatchMetadataUpdate","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"string","name":"contractURI","type":"string"}],"name":"ContractURIUpdated","type":"event"},{"anonymous":false,"inputs":[],"name":"ContractURIUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"MetadataUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"address","name":"currency","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"string","name":"tokenData","type":"string"}],"name":"Mint","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint96","name":"bps","type":"uint96"}],"name":"RoyaltySet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bool","name":"allowed","type":"bool"}],"name":"TokensAllowlist","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":true,"internalType":"bool","name":"allowed","type":"bool"}],"name":"TokensAllowlistUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"currency","type":"address"},{"indexed":true,"internalType":"bool","name":"enabled","type":"bool"},{"indexed":true,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"UpdateDefaultMintPrice","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"currency","type":"address"},{"indexed":true,"internalType":"bool","name":"enabled","type":"bool"},{"indexed":true,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"UpdateMintPrice","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"expires","type":"uint256"}],"name":"UpdateUser","type":"event"},{"inputs":[],"name":"MAX_SUPPLY","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINTER","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"applyTokensAllowlist","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"contractURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"currency","type":"address"}],"name":"getMintPrice","outputs":[{"internalType":"bool","name":"enabled","type":"bool"},{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"string","name":"baseURI","type":"string"},{"internalType":"string","name":"contractURI","type":"string"},{"internalType":"address","name":"minter","type":"address"},{"internalType":"uint256","name":"maxSupply","type":"uint256"},{"internalType":"address","name":"forwarder","type":"address"},{"internalType":"address","name":"initialOwner","type":"address"},{"internalType":"uint96","name":"royaltyBps","type":"uint96"},{"internalType":"address[]","name":"currencies","type":"address[]"},{"internalType":"uint256[]","name":"prices","type":"uint256[]"},{"internalType":"uint256[]","name":"allowedTokenIds","type":"uint256[]"}],"internalType":"struct IDSponsorNFTBase.InitParams","name":"params","type":"tuple"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"forwarder","type":"address"}],"name":"isTrustedForwarder","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"internalType":"address","name":"currency","type":"address"},{"internalType":"string","name":"tokenData","type":"string"}],"name":"mint","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"salePrice","type":"uint256"}],"name":"royaltyInfo","outputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_baseURI","type":"string"}],"name":"setBaseURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_contractURI","type":"string"}],"name":"setContractURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"currency","type":"address"},{"internalType":"bool","name":"enabled","type":"bool"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"setDefaultMintPrice","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"currency","type":"address"},{"internalType":"bool","name":"enabled","type":"bool"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"setMintPrice","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint96","name":"feeBps","type":"uint96"}],"name":"setRoyalty","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"},{"internalType":"string","name":"_tokenURI","type":"string"}],"name":"setTokenURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_tokenIds","type":"uint256[]"},{"internalType":"string[]","name":"_tokenURIs","type":"string[]"}],"name":"setTokenURIs","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_applyTokensAllowlist","type":"bool"}],"name":"setTokensAllowlist","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"tokenIds","type":"uint256[]"},{"internalType":"bool[]","name":"allowed","type":"bool[]"}],"name":"setTokensAreAllowed","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"forwarder","type":"address"}],"name":"setTrustedForwarder","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"user","type":"address"},{"internalType":"uint64","name":"expires","type":"uint64"}],"name":"setUser","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenIdIsAllowedToMint","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"tokenURIs","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"trustedForwarder","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"userExpires","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"userOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]
Loading...
Loading
[ Download: CSV Export ]
A contract address hosts a smart contract, which is a set of code stored on the blockchain that runs when predetermined conditions are met. Learn more about addresses in our Knowledge Base.