Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.2;

import "@gnus.ai/contracts-upgradeable-diamond/proxy/utils/Initializable.sol";
import "./GeniusAIStorage.sol";
import "./GeniusAccessControl.sol";

contract GeniusAI is Initializable, GeniusAccessControl {
    using GeniusAIStorage for GeniusAIStorage.Layout;

    // one time initialization on, subsequent calls get ignored with initializer
    function GeniusAI_Initialize() public initializer onlySuperAdminRole {
        // since this should be the last facet initiliazed, keep that all the contracts have been initialized
    }

    /// OpenEscrow
    /// msg.value = amount OF GNUS to deposit in escrow
    /// UUID - 128 bit/32 byte UUID (no dashes) of unique ID for Job structure in database
    function OpenEscrow(bytes32 UUID) public payable {
        address sender = _msgSender();
        uint256 escrowID = GeniusAIStorage.layout().numEscrows[sender]++;
        GeniusAIStorage.layout().AIProcessingJobs[sender][escrowID] = AIProcessingJob({ escrowID: escrowID, escrowAmount: msg.value, uuid: UUID });
    }

}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;


import { AccessControlEnumerableUpgradeable } from "./AccessControlEnumerableUpgradeable.sol";
import { EnumerableSetUpgradeable } from "../utils/structs/EnumerableSetUpgradeable.sol";

library AccessControlEnumerableStorage {

  struct Layout {

    mapping(bytes32 => EnumerableSetUpgradeable.AddressSet) _roleMembers;
  
  }
  
  bytes32 internal constant STORAGE_SLOT = keccak256('openzepplin.contracts.storage.AccessControlEnumerable');

  function layout() internal pure returns (Layout storage l) {
    bytes32 slot = STORAGE_SLOT;
    assembly {
      l.slot := slot
    }
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControlEnumerableUpgradeable.sol";
import "./AccessControlUpgradeable.sol";
import "../utils/structs/EnumerableSetUpgradeable.sol";
import { AccessControlEnumerableStorage } from "./AccessControlEnumerableStorage.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerableUpgradeable is Initializable, IAccessControlEnumerableUpgradeable, AccessControlUpgradeable {
    using AccessControlEnumerableStorage for AccessControlEnumerableStorage.Layout;
    function __AccessControlEnumerable_init() internal onlyInitializing {
        __Context_init_unchained();
        __ERC165_init_unchained();
        __AccessControl_init_unchained();
        __AccessControlEnumerable_init_unchained();
    }

    function __AccessControlEnumerable_init_unchained() internal onlyInitializing {
    }
    using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerableUpgradeable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view virtual override returns (address) {
        return AccessControlEnumerableStorage.layout()._roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view virtual override returns (uint256) {
        return AccessControlEnumerableStorage.layout()._roleMembers[role].length();
    }

    /**
     * @dev Overload {_grantRole} to track enumerable memberships
     */
    function _grantRole(bytes32 role, address account) internal virtual override {
        super._grantRole(role, account);
        AccessControlEnumerableStorage.layout()._roleMembers[role].add(account);
    }

    /**
     * @dev Overload {_revokeRole} to track enumerable memberships
     */
    function _revokeRole(bytes32 role, address account) internal virtual override {
        super._revokeRole(role, account);
        AccessControlEnumerableStorage.layout()._roleMembers[role].remove(account);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;


import { AccessControlUpgradeable } from "./AccessControlUpgradeable.sol";

library AccessControlStorage {

  struct Layout {

    mapping(bytes32 => AccessControlUpgradeable.RoleData) _roles;
  
  }
  
  bytes32 internal constant STORAGE_SLOT = keccak256('openzepplin.contracts.storage.AccessControl');

  function layout() internal pure returns (Layout storage l) {
    bytes32 slot = STORAGE_SLOT;
    assembly {
      l.slot := slot
    }
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

import "./IAccessControlUpgradeable.sol";
import "../utils/ContextUpgradeable.sol";
import "../utils/StringsUpgradeable.sol";
import "../utils/introspection/ERC165Upgradeable.sol";
import { AccessControlStorage } from "./AccessControlStorage.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControlUpgradeable, ERC165Upgradeable {
    using AccessControlStorage for AccessControlStorage.Layout;
    function __AccessControl_init() internal onlyInitializing {
        __Context_init_unchained();
        __ERC165_init_unchained();
        __AccessControl_init_unchained();
    }

    function __AccessControl_init_unchained() internal onlyInitializing {
    }
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlUpgradeable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return AccessControlStorage.layout()._roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        StringsUpgradeable.toHexString(uint160(account), 20),
                        " is missing role ",
                        StringsUpgradeable.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return AccessControlStorage.layout()._roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        AccessControlStorage.layout()._roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            AccessControlStorage.layout()._roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            AccessControlStorage.layout()._roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)

pragma solidity ^0.8.0;

import "./IAccessControlUpgradeable.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerableUpgradeable is IAccessControlUpgradeable {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControlUpgradeable {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.0;

import "../../utils/AddressUpgradeable.sol";
import { InitializableStorage } from "./InitializableStorage.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
 * initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() initializer {}
 * ```
 * ====
 */
abstract contract Initializable {

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        // If the contract is initializing we ignore whether _initialized is set in order to support multiple
        // inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
        // contract may have been reentered.
        require(InitializableStorage.layout()._initializing ? _isConstructor() : !InitializableStorage.layout()._initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !InitializableStorage.layout()._initializing;
        if (isTopLevelCall) {
            InitializableStorage.layout()._initializing = true;
            InitializableStorage.layout()._initialized = true;
        }

        _;

        if (isTopLevelCall) {
            InitializableStorage.layout()._initializing = false;
        }
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} modifier, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(InitializableStorage.layout()._initializing, "Initializable: contract is not initializing");
        _;
    }

    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;


import { Initializable } from "./Initializable.sol";

library InitializableStorage {

  struct Layout {
    /*
     * @dev Indicates that the contract has been initialized.
     */
    bool _initialized;

    /*
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool _initializing;
  
  }
  
  bytes32 internal constant STORAGE_SLOT = keccak256('openzepplin.contracts.storage.Initializable');

  function layout() internal pure returns (Layout storage l) {
    bytes32 slot = STORAGE_SLOT;
    assembly {
      l.slot := slot
    }
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
        __Context_init_unchained();
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
    function __ERC165_init() internal onlyInitializing {
        __ERC165_init_unchained();
    }

    function __ERC165_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165Upgradeable).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165Upgradeable {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library StringsUpgradeable {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSetUpgradeable {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/******************************************************************************\
* Author: Nick Mudge <[email protected]> (https://twitter.com/mudgen)
* EIP-2535 Diamonds: https://eips.ethereum.org/EIPS/eip-2535
/******************************************************************************/

interface IDiamondCut {
    enum FacetCutAction {Add, Replace, Remove}
    // Add=0, Replace=1, Remove=2

    struct FacetCut {
        address facetAddress;
        FacetCutAction action;
        bytes4[] functionSelectors;
    }

    /// @notice Add/replace/remove any number of functions and optionally execute
    ///         a function with delegatecall
    /// @param _diamondCut Contains the facet addresses and function selectors
    /// @param _init The address of the contract or facet to execute _calldata
    /// @param _calldata A function call, including function selector and arguments
    ///                  _calldata is executed with delegatecall on _init
    function diamondCut(
        FacetCut[] calldata _diamondCut,
        address _init,
        bytes calldata _calldata
    ) external;

    event DiamondCut(FacetCut[] _diamondCut, address _init, bytes _calldata);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/******************************************************************************\
* Author: Nick Mudge <[email protected]> (https://twitter.com/mudgen)
* EIP-2535 Diamonds: https://eips.ethereum.org/EIPS/eip-2535
/******************************************************************************/
import { IDiamondCut } from "../interfaces/IDiamondCut.sol";

// Remember to add the loupe functions from DiamondLoupeFacet to the diamond.
// The loupe functions are required by the EIP2535 Diamonds standard

error InitializationFunctionReverted(address _initializationContractAddress, bytes _calldata);

library LibDiamond {
    bytes32 constant DIAMOND_STORAGE_POSITION = keccak256("diamond.standard.diamond.storage");

    struct DiamondStorage {
        // maps function selectors to the facets that execute the functions.
        // and maps the selectors to their position in the selectorSlots array.
        // func selector => address facet, selector position
        mapping(bytes4 => bytes32) facets;
        // array of slots of function selectors.
        // each slot holds 8 function selectors.
        mapping(uint256 => bytes32) selectorSlots;
        // The number of function selectors in selectorSlots
        uint16 selectorCount;
        // Used to query if a contract implements an interface.
        // Used to implement ERC-165.
        mapping(bytes4 => bool) supportedInterfaces;
        // owner of the contract
        address contractOwner;
    }

    function diamondStorage() internal pure returns (DiamondStorage storage ds) {
        bytes32 position = DIAMOND_STORAGE_POSITION;
        assembly {
            ds.slot := position
        }
    }

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    function setContractOwner(address _newOwner) internal {
        DiamondStorage storage ds = diamondStorage();
        address previousOwner = ds.contractOwner;
        ds.contractOwner = _newOwner;
        emit OwnershipTransferred(previousOwner, _newOwner);
    }

    function contractOwner() internal view returns (address contractOwner_) {
        contractOwner_ = diamondStorage().contractOwner;
    }

    function enforceIsContractOwner() internal view {
        require(msg.sender == diamondStorage().contractOwner, "LibDiamond: Must be contract owner");
    }

    event DiamondCut(IDiamondCut.FacetCut[] _diamondCut, address _init, bytes _calldata);

    bytes32 constant CLEAR_ADDRESS_MASK = bytes32(uint256(0xffffffffffffffffffffffff));
    bytes32 constant CLEAR_SELECTOR_MASK = bytes32(uint256(0xffffffff << 224));

    // Internal function version of diamondCut
    // This code is almost the same as the external diamondCut,
    // except it is using 'Facet[] memory _diamondCut' instead of
    // 'Facet[] calldata _diamondCut'.
    // The code is duplicated to prevent copying calldata to memory which
    // causes an error for a two dimensional array.
    function diamondCut(
        IDiamondCut.FacetCut[] memory _diamondCut,
        address _init,
        bytes memory _calldata
    ) internal {
        DiamondStorage storage ds = diamondStorage();
        uint256 originalSelectorCount = ds.selectorCount;
        uint256 selectorCount = originalSelectorCount;
        bytes32 selectorSlot;
        // Check if last selector slot is not full
        // "selectorCount & 7" is a gas efficient modulo by eight "selectorCount % 8" 
        if (selectorCount & 7 > 0) {
            // get last selectorSlot
            // "selectorSlot >> 3" is a gas efficient division by 8 "selectorSlot / 8"
            selectorSlot = ds.selectorSlots[selectorCount >> 3];
        }
        // loop through diamond cut
        for (uint256 facetIndex; facetIndex < _diamondCut.length; ) {
            (selectorCount, selectorSlot) = addReplaceRemoveFacetSelectors(
                selectorCount,
                selectorSlot,
                _diamondCut[facetIndex].facetAddress,
                _diamondCut[facetIndex].action,
                _diamondCut[facetIndex].functionSelectors
            );

            unchecked {
                facetIndex++;
            }
        }
        if (selectorCount != originalSelectorCount) {
            ds.selectorCount = uint16(selectorCount);
        }
        // If last selector slot is not full
        // "selectorCount & 7" is a gas efficient modulo by eight "selectorCount % 8" 
        if (selectorCount & 7 > 0) {
            // "selectorSlot >> 3" is a gas efficient division by 8 "selectorSlot / 8"
            ds.selectorSlots[selectorCount >> 3] = selectorSlot;
        }
        emit DiamondCut(_diamondCut, _init, _calldata);
        initializeDiamondCut(_init, _calldata);
    }

    function addReplaceRemoveFacetSelectors(
        uint256 _selectorCount,
        bytes32 _selectorSlot,
        address _newFacetAddress,
        IDiamondCut.FacetCutAction _action,
        bytes4[] memory _selectors
    ) internal returns (uint256, bytes32) {
        DiamondStorage storage ds = diamondStorage();
        require(_selectors.length > 0, "LibDiamondCut: No selectors in facet to cut");
        if (_action == IDiamondCut.FacetCutAction.Add) {
            enforceHasContractCode(_newFacetAddress, "LibDiamondCut: Add facet has no code");
            for (uint256 selectorIndex; selectorIndex < _selectors.length; ) {
                bytes4 selector = _selectors[selectorIndex];
                bytes32 oldFacet = ds.facets[selector];
                require(address(bytes20(oldFacet)) == address(0), "LibDiamondCut: Can't add function that already exists");
                // add facet for selector
                ds.facets[selector] = bytes20(_newFacetAddress) | bytes32(_selectorCount);
                // "_selectorCount & 7" is a gas efficient modulo by eight "_selectorCount % 8" 
                // " << 5 is the same as multiplying by 32 ( * 32)
                uint256 selectorInSlotPosition = (_selectorCount & 7) << 5;
                // clear selector position in slot and add selector
                _selectorSlot = (_selectorSlot & ~(CLEAR_SELECTOR_MASK >> selectorInSlotPosition)) | (bytes32(selector) >> selectorInSlotPosition);
                // if slot is full then write it to storage
                if (selectorInSlotPosition == 224) {
                    // "_selectorSlot >> 3" is a gas efficient division by 8 "_selectorSlot / 8"
                    ds.selectorSlots[_selectorCount >> 3] = _selectorSlot;
                    _selectorSlot = 0;
                }
                _selectorCount++;

                unchecked {
                    selectorIndex++;
                }
            }
        } else if (_action == IDiamondCut.FacetCutAction.Replace) {
            enforceHasContractCode(_newFacetAddress, "LibDiamondCut: Replace facet has no code");
            for (uint256 selectorIndex; selectorIndex < _selectors.length; ) {
                bytes4 selector = _selectors[selectorIndex];
                bytes32 oldFacet = ds.facets[selector];
                address oldFacetAddress = address(bytes20(oldFacet));
                // only useful if immutable functions exist
                require(oldFacetAddress != address(this), "LibDiamondCut: Can't replace immutable function");
                require(oldFacetAddress != _newFacetAddress, "LibDiamondCut: Can't replace function with same function");
                require(oldFacetAddress != address(0), "LibDiamondCut: Can't replace function that doesn't exist");
                // replace old facet address
                ds.facets[selector] = (oldFacet & CLEAR_ADDRESS_MASK) | bytes20(_newFacetAddress);

                unchecked {
                    selectorIndex++;
                }
            }
        } else if (_action == IDiamondCut.FacetCutAction.Remove) {
            require(_newFacetAddress == address(0), "LibDiamondCut: Remove facet address must be address(0)");
            // "_selectorCount >> 3" is a gas efficient division by 8 "_selectorCount / 8"
            uint256 selectorSlotCount = _selectorCount >> 3;
            // "_selectorCount & 7" is a gas efficient modulo by eight "_selectorCount % 8" 
            uint256 selectorInSlotIndex = _selectorCount & 7;
            for (uint256 selectorIndex; selectorIndex < _selectors.length; ) {
                if (selectorInSlotIndex == 0) {
                    // get last selectorSlot
                    selectorSlotCount--;
                    _selectorSlot = ds.selectorSlots[selectorSlotCount];
                    selectorInSlotIndex = 7;
                } else {
                    selectorInSlotIndex--;
                }
                bytes4 lastSelector;
                uint256 oldSelectorsSlotCount;
                uint256 oldSelectorInSlotPosition;
                // adding a block here prevents stack too deep error
                {
                    bytes4 selector = _selectors[selectorIndex];
                    bytes32 oldFacet = ds.facets[selector];
                    require(address(bytes20(oldFacet)) != address(0), "LibDiamondCut: Can't remove function that doesn't exist");
                    // only useful if immutable functions exist
                    require(address(bytes20(oldFacet)) != address(this), "LibDiamondCut: Can't remove immutable function");
                    // replace selector with last selector in ds.facets
                    // gets the last selector
                    // " << 5 is the same as multiplying by 32 ( * 32)
                    lastSelector = bytes4(_selectorSlot << (selectorInSlotIndex << 5));
                    if (lastSelector != selector) {
                        // update last selector slot position info
                        ds.facets[lastSelector] = (oldFacet & CLEAR_ADDRESS_MASK) | bytes20(ds.facets[lastSelector]);
                    }
                    delete ds.facets[selector];
                    uint256 oldSelectorCount = uint16(uint256(oldFacet));
                    // "oldSelectorCount >> 3" is a gas efficient division by 8 "oldSelectorCount / 8"
                    oldSelectorsSlotCount = oldSelectorCount >> 3;
                    // "oldSelectorCount & 7" is a gas efficient modulo by eight "oldSelectorCount % 8" 
                    // " << 5 is the same as multiplying by 32 ( * 32)
                    oldSelectorInSlotPosition = (oldSelectorCount & 7) << 5;
                }
                if (oldSelectorsSlotCount != selectorSlotCount) {
                    bytes32 oldSelectorSlot = ds.selectorSlots[oldSelectorsSlotCount];
                    // clears the selector we are deleting and puts the last selector in its place.
                    oldSelectorSlot =
                        (oldSelectorSlot & ~(CLEAR_SELECTOR_MASK >> oldSelectorInSlotPosition)) |
                        (bytes32(lastSelector) >> oldSelectorInSlotPosition);
                    // update storage with the modified slot
                    ds.selectorSlots[oldSelectorsSlotCount] = oldSelectorSlot;
                } else {
                    // clears the selector we are deleting and puts the last selector in its place.
                    _selectorSlot =
                        (_selectorSlot & ~(CLEAR_SELECTOR_MASK >> oldSelectorInSlotPosition)) |
                        (bytes32(lastSelector) >> oldSelectorInSlotPosition);
                }
                if (selectorInSlotIndex == 0) {
                    delete ds.selectorSlots[selectorSlotCount];
                    _selectorSlot = 0;
                }

                unchecked {
                    selectorIndex++;
                }
            }
            _selectorCount = selectorSlotCount * 8 + selectorInSlotIndex;
        } else {
            revert("LibDiamondCut: Incorrect FacetCutAction");
        }
        return (_selectorCount, _selectorSlot);
    }

    function initializeDiamondCut(address _init, bytes memory _calldata) internal {
        if (_init == address(0)) {
            return;
        }
        enforceHasContractCode(_init, "LibDiamondCut: _init address has no code");        
        (bool success, bytes memory error) = _init.delegatecall(_calldata);
        if (!success) {
            if (error.length > 0) {
                // bubble up error
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(error)
                    revert(add(32, error), returndata_size)
                }
            } else {
                revert InitializationFunctionReverted(_init, _calldata);
            }
        }
    }

    function enforceHasContractCode(address _contract, string memory _errorMessage) internal view {
        uint256 contractSize;
        assembly {
            contractSize := extcodesize(_contract)
        }
        require(contractSize > 0, _errorMessage);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.2;

import "@gnus.ai/contracts-upgradeable-diamond/access/AccessControlEnumerableUpgradeable.sol";
import "@gnus.ai/contracts-upgradeable-diamond/proxy/utils/Initializable.sol";
import "contracts-starter/contracts/libraries/LibDiamond.sol";

abstract contract GeniusAccessControl is Initializable, AccessControlEnumerableUpgradeable {

    bytes32 constant public UPGRADER_ROLE = keccak256("UPGRADER_ROLE");

    function __GeniusAccessControl_init() internal onlyInitializing onlySuperAdminRole {
        __AccessControlEnumerable_init_unchained();
        __GeniusAccessControl_init_unchained();
    }

    function __GeniusAccessControl_init_unchained() onlyInitializing internal {
        address superAdmin = _msgSender();
        _grantRole(DEFAULT_ADMIN_ROLE, superAdmin);
        _grantRole(UPGRADER_ROLE, superAdmin);
    }

    function renounceRole(bytes32 role, address account) public override(IAccessControlUpgradeable) {
        require(!(hasRole(DEFAULT_ADMIN_ROLE, account) && (LibDiamond.diamondStorage().contractOwner == account)), "Cannot renounce superAdmin from Admin Role");
        super.renounceRole(role, account);
    }

    function revokeRole(bytes32 role, address account) public override(IAccessControlUpgradeable) {
        require(!(hasRole(DEFAULT_ADMIN_ROLE, account) && (LibDiamond.diamondStorage().contractOwner == account)), "Cannot revoke superAdmin from Admin Role");
        super.revokeRole(role, account);
    }

    modifier onlySuperAdminRole {
        require(LibDiamond.diamondStorage().contractOwner == msg.sender, "Only SuperAdmin allowed");
        _;
    }


}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.2;

// section for GNUSAI contract, version 1.0
struct AIProcessingJob {
    uint256 escrowID;                               // auto incremented ID for Escrow
    bytes32 uuid;                                   // ipfs cid minus first 2 bytes (Qm)
    uint256 escrowAmount;                           // amount in gwei for Escrow on deposit
    // mapping (address => uint256) payeesAmount;      // for a particular job the payees
}

library GeniusAIStorage {

    struct Layout {
        // Current number of Escrows created by address
        mapping(address => uint256) numEscrows;
        // Map of AI Processing jobs, keyed by EscrowID
        mapping(address => mapping(uint256 => AIProcessingJob)) AIProcessingJobs;
    }

    bytes32 constant GENIUS_AI_STORAGE_POSITION = keccak256("gnus.ai.storage");

    function layout() internal pure returns (Layout storage ds) {
        bytes32 position = GENIUS_AI_STORAGE_POSITION;
        assembly {
            ds.slot := position
        }
    }

}

{
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"GeniusAI_Initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"UUID","type":"bytes32"}],"name":"OpenEscrow","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"UPGRADER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]

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