Sepolia Testnet

Contract

0x40C77F8cc70DF8F6D7A91ebb5291d38d42540455

Overview

ETH Balance

0 ETH

Multichain Info

N/A
Transaction Hash
Method
Block
From
To
Create Loan And ...65483752024-08-22 8:16:36104 days ago1724314596IN
0x40C77F8c...d42540455
0.00051903 ETH0.004142699.95227825
Create Loan And ...65482472024-08-22 7:48:24104 days ago1724312904IN
0x40C77F8c...d42540455
0.00051892 ETH0.0074938217.79768182
Create Loan And ...65480842024-08-22 7:12:12104 days ago1724310732IN
0x40C77F8c...d42540455
0.00051903 ETH0.0086513420.78310622
Create Loan And ...65476332024-08-22 5:29:48104 days ago1724304588IN
0x40C77F8c...d42540455
0.02872478 ETH0.00088952.57199883
Create Loan And ...65472792024-08-22 4:07:36104 days ago1724299656IN
0x40C77F8c...d42540455
0.02869952 ETH0.0058074816.79173619
Create Loan And ...65472702024-08-22 4:05:36104 days ago1724299536IN
0x40C77F8c...d42540455
0.00073756 ETH0.0059026714.18040582
Create Loan And ...65472672024-08-22 4:04:48104 days ago1724299488IN
0x40C77F8c...d42540455
0.02871426 ETH0.0054147915.65683339
Create Loan And ...65472382024-08-22 3:58:12104 days ago1724299092IN
0x40C77F8c...d42540455
0.02871426 ETH0.0083322923.63041346
Create Loan And ...65455732024-08-21 21:41:48105 days ago1724276508IN
0x40C77F8c...d42540455
0.02887612 ETH0.002418956.99560566
Create Loan And ...65447722024-08-21 18:41:00105 days ago1724265660IN
0x40C77F8c...d42540455
0.02870464 ETH0.0063481218.10367109
Create Loan And ...65440912024-08-21 16:06:36105 days ago1724256396IN
0x40C77F8c...d42540455
0.0004861 ETH0.0274522465.2004142
Create Loan And ...65436112024-08-21 14:16:00105 days ago1724249760IN
0x40C77F8c...d42540455
0.02868964 ETH0.0053079615.34793391
Create Loan And ...65432932024-08-21 13:05:36105 days ago1724245536IN
0x40C77F8c...d42540455
0.00052267 ETH0.0097663223.4623
Create Loan And ...65432912024-08-21 13:05:12105 days ago1724245512IN
0x40C77F8c...d42540455
0.00052267 ETH0.009669923.23
Deposit65431502024-08-21 12:32:36105 days ago1724243556IN
0x40C77F8c...d42540455
0.02459094 ETH0.0187611953.80695796
Deposit65430472024-08-21 12:09:12105 days ago1724242152IN
0x40C77F8c...d42540455
0.02470507 ETH0.0096386828.02856584
Deposit65430412024-08-21 12:07:48105 days ago1724242068IN
0x40C77F8c...d42540455
0.02474882 ETH0.0117453134.15447769
Deposit65430342024-08-21 12:06:00105 days ago1724241960IN
0x40C77F8c...d42540455
0.00048267 ETH0.0153535737.06569601
Deposit65430292024-08-21 12:05:00105 days ago1724241900IN
0x40C77F8c...d42540455
0.00048118 ETH0.0168731740.73422518
Deposit65430232024-08-21 12:03:48105 days ago1724241828IN
0x40C77F8c...d42540455
0.02460143 ETH0.0124990836.34638121
Deposit65430152024-08-21 12:02:12105 days ago1724241732IN
0x40C77F8c...d42540455
0.00048098 ETH0.0123214829.74579494
Deposit65430092024-08-21 12:01:00105 days ago1724241660IN
0x40C77F8c...d42540455
0.00048094 ETH0.01092126.36484876
Deposit65430032024-08-21 11:59:48105 days ago1724241588IN
0x40C77F8c...d42540455
0.00048073 ETH0.0093792222.64277414
Deposit65429712024-08-21 11:51:36105 days ago1724241096IN
0x40C77F8c...d42540455
0.00050445 ETH0.0047541511.3457208
Deposit65428872024-08-21 11:31:36105 days ago1724239896IN
0x40C77F8c...d42540455
0.02697917 ETH0.002092566.00145377
View all transactions

Latest 25 internal transactions (View All)

Advanced mode:
Parent Transaction Hash Block From To
65483752024-08-22 8:16:36104 days ago1724314596
0x40C77F8c...d42540455
0.00051903 ETH
65482472024-08-22 7:48:24104 days ago1724312904
0x40C77F8c...d42540455
0.00051892 ETH
65480842024-08-22 7:12:12104 days ago1724310732
0x40C77F8c...d42540455
0.00051903 ETH
65476332024-08-22 5:29:48104 days ago1724304588
0x40C77F8c...d42540455
0.02872478 ETH
65472792024-08-22 4:07:36104 days ago1724299656
0x40C77F8c...d42540455
0.02869952 ETH
65472702024-08-22 4:05:36104 days ago1724299536
0x40C77F8c...d42540455
0.00073756 ETH
65472672024-08-22 4:04:48104 days ago1724299488
0x40C77F8c...d42540455
0.02871426 ETH
65472382024-08-22 3:58:12104 days ago1724299092
0x40C77F8c...d42540455
0.02871426 ETH
65455732024-08-21 21:41:48105 days ago1724276508
0x40C77F8c...d42540455
0.02887612 ETH
65447722024-08-21 18:41:00105 days ago1724265660
0x40C77F8c...d42540455
0.02870464 ETH
65440912024-08-21 16:06:36105 days ago1724256396
0x40C77F8c...d42540455
0.0004861 ETH
65436112024-08-21 14:16:00105 days ago1724249760
0x40C77F8c...d42540455
0.02868964 ETH
65432932024-08-21 13:05:36105 days ago1724245536
0x40C77F8c...d42540455
0.00052267 ETH
65432912024-08-21 13:05:12105 days ago1724245512
0x40C77F8c...d42540455
0.00052267 ETH
65431502024-08-21 12:32:36105 days ago1724243556
0x40C77F8c...d42540455
0.02459094 ETH
65430472024-08-21 12:09:12105 days ago1724242152
0x40C77F8c...d42540455
0.02470507 ETH
65430412024-08-21 12:07:48105 days ago1724242068
0x40C77F8c...d42540455
0.02474882 ETH
65430342024-08-21 12:06:00105 days ago1724241960
0x40C77F8c...d42540455
0.00048267 ETH
65430292024-08-21 12:05:00105 days ago1724241900
0x40C77F8c...d42540455
0.00048118 ETH
65430232024-08-21 12:03:48105 days ago1724241828
0x40C77F8c...d42540455
0.02460143 ETH
65430152024-08-21 12:02:12105 days ago1724241732
0x40C77F8c...d42540455
0.00048098 ETH
65430092024-08-21 12:01:00105 days ago1724241660
0x40C77F8c...d42540455
0.00048094 ETH
65430032024-08-21 11:59:48105 days ago1724241588
0x40C77F8c...d42540455
0.00048073 ETH
65429712024-08-21 11:51:36105 days ago1724241096
0x40C77F8c...d42540455
0.00050445 ETH
65428872024-08-21 11:31:36105 days ago1724239896
0x40C77F8c...d42540455
0.02697917 ETH
View All Internal Transactions
Loading...
Loading

Contract Source Code Verified (Exact Match)

Contract Name:
SpokeCircleToken

Compiler Version
v0.8.20+commit.a1b79de6

Optimization Enabled:
Yes with 200 runs

Other Settings:
paris EvmVersion

Contract Source Code (Solidity Standard Json-Input format)

File 1 of 25 : SpokeCircleToken.sol
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.20;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "../bridge/interfaces/IBridgeRouter.sol";
import "../bridge/libraries/Messages.sol";
import "./interfaces/IAddressOracle.sol";
import "./SpokeToken.sol";

contract SpokeCircleToken is SpokeToken {
    address public immutable token;
    bytes32 public immutable hubTokenPoolAddress;
    uint256 public immutable minBucketLimit;

    constructor(
        address admin,
        IBridgeRouter bridgeRouter,
        uint16 hubChainId,
        bytes32 hubContractAddress,
        IAddressOracle addressOracle,
        BucketConfig memory bucketConfig,
        uint8 poolId,
        address token_,
        bytes32 hubTokenPoolAddress_,
        uint256 minBucketLimit_
    ) SpokeToken(admin, bridgeRouter, hubChainId, hubContractAddress, addressOracle, bucketConfig, poolId) {
        token = token_;
        hubTokenPoolAddress = hubTokenPoolAddress_;
        minBucketLimit = minBucketLimit_;
    }

    function _receiveToken(
        Messages.MessageParams memory params,
        uint256 amount
    ) internal override returns (bytes memory extraArgs, uint256 feeAmount) {
        // transfer tokens from sender to adapter (to then be bridged)
        address adapterAddress = address(bridgeRouter.getAdapter(params.adapterId));
        SafeERC20.safeTransferFrom(IERC20(token), msg.sender, adapterAddress, amount);

        // info for circle adapter to bridge token
        extraArgs = Messages.extraArgsToBytes(
            Messages.ExtraArgsV1({
                token: Messages.convertEVMAddressToGenericAddress(token),
                recipient: hubTokenPoolAddress,
                amount: amount
            })
        );

        // value passed excluding the received amount is available to be used
        feeAmount = msg.value;
    }

    function _sendToken(address recipient, uint256 amount) internal override {
        // token redeemed in adapter and received here, now forwarded to recipient
        SafeERC20.safeTransfer(IERC20(token), recipient, amount);
    }

    function _minLimit() internal view override returns (uint256) {
        return minBucketLimit;
    }
}

File 2 of 25 : AccessControl.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/AccessControl.sol)

pragma solidity ^0.8.20;

import {IAccessControl} from "./IAccessControl.sol";
import {Context} from "../utils/Context.sol";
import {ERC165} from "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address account => bool) hasRole;
        bytes32 adminRole;
    }

    mapping(bytes32 role => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with an {AccessControlUnauthorizedAccount} error including the required role.
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual returns (bool) {
        return _roles[role].hasRole[account];
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
     * is missing `role`.
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert AccessControlUnauthorizedAccount(account, role);
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessControlBadConfirmation();
        }

        _revokeRole(role, callerConfirmation);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
        if (!hasRole(role, account)) {
            _roles[role].hasRole[account] = true;
            emit RoleGranted(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Attempts to revoke `role` to `account` and returns a boolean indicating if `role` was revoked.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
        if (hasRole(role, account)) {
            _roles[role].hasRole[account] = false;
            emit RoleRevoked(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
}

File 3 of 25 : AccessControlDefaultAdminRules.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/extensions/AccessControlDefaultAdminRules.sol)

pragma solidity ^0.8.20;

import {IAccessControlDefaultAdminRules} from "./IAccessControlDefaultAdminRules.sol";
import {AccessControl, IAccessControl} from "../AccessControl.sol";
import {SafeCast} from "../../utils/math/SafeCast.sol";
import {Math} from "../../utils/math/Math.sol";
import {IERC5313} from "../../interfaces/IERC5313.sol";

/**
 * @dev Extension of {AccessControl} that allows specifying special rules to manage
 * the `DEFAULT_ADMIN_ROLE` holder, which is a sensitive role with special permissions
 * over other roles that may potentially have privileged rights in the system.
 *
 * If a specific role doesn't have an admin role assigned, the holder of the
 * `DEFAULT_ADMIN_ROLE` will have the ability to grant it and revoke it.
 *
 * This contract implements the following risk mitigations on top of {AccessControl}:
 *
 * * Only one account holds the `DEFAULT_ADMIN_ROLE` since deployment until it's potentially renounced.
 * * Enforces a 2-step process to transfer the `DEFAULT_ADMIN_ROLE` to another account.
 * * Enforces a configurable delay between the two steps, with the ability to cancel before the transfer is accepted.
 * * The delay can be changed by scheduling, see {changeDefaultAdminDelay}.
 * * It is not possible to use another role to manage the `DEFAULT_ADMIN_ROLE`.
 *
 * Example usage:
 *
 * ```solidity
 * contract MyToken is AccessControlDefaultAdminRules {
 *   constructor() AccessControlDefaultAdminRules(
 *     3 days,
 *     msg.sender // Explicit initial `DEFAULT_ADMIN_ROLE` holder
 *    ) {}
 * }
 * ```
 */
abstract contract AccessControlDefaultAdminRules is IAccessControlDefaultAdminRules, IERC5313, AccessControl {
    // pending admin pair read/written together frequently
    address private _pendingDefaultAdmin;
    uint48 private _pendingDefaultAdminSchedule; // 0 == unset

    uint48 private _currentDelay;
    address private _currentDefaultAdmin;

    // pending delay pair read/written together frequently
    uint48 private _pendingDelay;
    uint48 private _pendingDelaySchedule; // 0 == unset

    /**
     * @dev Sets the initial values for {defaultAdminDelay} and {defaultAdmin} address.
     */
    constructor(uint48 initialDelay, address initialDefaultAdmin) {
        if (initialDefaultAdmin == address(0)) {
            revert AccessControlInvalidDefaultAdmin(address(0));
        }
        _currentDelay = initialDelay;
        _grantRole(DEFAULT_ADMIN_ROLE, initialDefaultAdmin);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlDefaultAdminRules).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC5313-owner}.
     */
    function owner() public view virtual returns (address) {
        return defaultAdmin();
    }

    ///
    /// Override AccessControl role management
    ///

    /**
     * @dev See {AccessControl-grantRole}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function grantRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        if (role == DEFAULT_ADMIN_ROLE) {
            revert AccessControlEnforcedDefaultAdminRules();
        }
        super.grantRole(role, account);
    }

    /**
     * @dev See {AccessControl-revokeRole}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function revokeRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        if (role == DEFAULT_ADMIN_ROLE) {
            revert AccessControlEnforcedDefaultAdminRules();
        }
        super.revokeRole(role, account);
    }

    /**
     * @dev See {AccessControl-renounceRole}.
     *
     * For the `DEFAULT_ADMIN_ROLE`, it only allows renouncing in two steps by first calling
     * {beginDefaultAdminTransfer} to the `address(0)`, so it's required that the {pendingDefaultAdmin} schedule
     * has also passed when calling this function.
     *
     * After its execution, it will not be possible to call `onlyRole(DEFAULT_ADMIN_ROLE)` functions.
     *
     * NOTE: Renouncing `DEFAULT_ADMIN_ROLE` will leave the contract without a {defaultAdmin},
     * thereby disabling any functionality that is only available for it, and the possibility of reassigning a
     * non-administrated role.
     */
    function renounceRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        if (role == DEFAULT_ADMIN_ROLE && account == defaultAdmin()) {
            (address newDefaultAdmin, uint48 schedule) = pendingDefaultAdmin();
            if (newDefaultAdmin != address(0) || !_isScheduleSet(schedule) || !_hasSchedulePassed(schedule)) {
                revert AccessControlEnforcedDefaultAdminDelay(schedule);
            }
            delete _pendingDefaultAdminSchedule;
        }
        super.renounceRole(role, account);
    }

    /**
     * @dev See {AccessControl-_grantRole}.
     *
     * For `DEFAULT_ADMIN_ROLE`, it only allows granting if there isn't already a {defaultAdmin} or if the
     * role has been previously renounced.
     *
     * NOTE: Exposing this function through another mechanism may make the `DEFAULT_ADMIN_ROLE`
     * assignable again. Make sure to guarantee this is the expected behavior in your implementation.
     */
    function _grantRole(bytes32 role, address account) internal virtual override returns (bool) {
        if (role == DEFAULT_ADMIN_ROLE) {
            if (defaultAdmin() != address(0)) {
                revert AccessControlEnforcedDefaultAdminRules();
            }
            _currentDefaultAdmin = account;
        }
        return super._grantRole(role, account);
    }

    /**
     * @dev See {AccessControl-_revokeRole}.
     */
    function _revokeRole(bytes32 role, address account) internal virtual override returns (bool) {
        if (role == DEFAULT_ADMIN_ROLE && account == defaultAdmin()) {
            delete _currentDefaultAdmin;
        }
        return super._revokeRole(role, account);
    }

    /**
     * @dev See {AccessControl-_setRoleAdmin}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual override {
        if (role == DEFAULT_ADMIN_ROLE) {
            revert AccessControlEnforcedDefaultAdminRules();
        }
        super._setRoleAdmin(role, adminRole);
    }

    ///
    /// AccessControlDefaultAdminRules accessors
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function defaultAdmin() public view virtual returns (address) {
        return _currentDefaultAdmin;
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function pendingDefaultAdmin() public view virtual returns (address newAdmin, uint48 schedule) {
        return (_pendingDefaultAdmin, _pendingDefaultAdminSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function defaultAdminDelay() public view virtual returns (uint48) {
        uint48 schedule = _pendingDelaySchedule;
        return (_isScheduleSet(schedule) && _hasSchedulePassed(schedule)) ? _pendingDelay : _currentDelay;
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function pendingDefaultAdminDelay() public view virtual returns (uint48 newDelay, uint48 schedule) {
        schedule = _pendingDelaySchedule;
        return (_isScheduleSet(schedule) && !_hasSchedulePassed(schedule)) ? (_pendingDelay, schedule) : (0, 0);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function defaultAdminDelayIncreaseWait() public view virtual returns (uint48) {
        return 5 days;
    }

    ///
    /// AccessControlDefaultAdminRules public and internal setters for defaultAdmin/pendingDefaultAdmin
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function beginDefaultAdminTransfer(address newAdmin) public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _beginDefaultAdminTransfer(newAdmin);
    }

    /**
     * @dev See {beginDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _beginDefaultAdminTransfer(address newAdmin) internal virtual {
        uint48 newSchedule = SafeCast.toUint48(block.timestamp) + defaultAdminDelay();
        _setPendingDefaultAdmin(newAdmin, newSchedule);
        emit DefaultAdminTransferScheduled(newAdmin, newSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function cancelDefaultAdminTransfer() public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _cancelDefaultAdminTransfer();
    }

    /**
     * @dev See {cancelDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _cancelDefaultAdminTransfer() internal virtual {
        _setPendingDefaultAdmin(address(0), 0);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function acceptDefaultAdminTransfer() public virtual {
        (address newDefaultAdmin, ) = pendingDefaultAdmin();
        if (_msgSender() != newDefaultAdmin) {
            // Enforce newDefaultAdmin explicit acceptance.
            revert AccessControlInvalidDefaultAdmin(_msgSender());
        }
        _acceptDefaultAdminTransfer();
    }

    /**
     * @dev See {acceptDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _acceptDefaultAdminTransfer() internal virtual {
        (address newAdmin, uint48 schedule) = pendingDefaultAdmin();
        if (!_isScheduleSet(schedule) || !_hasSchedulePassed(schedule)) {
            revert AccessControlEnforcedDefaultAdminDelay(schedule);
        }
        _revokeRole(DEFAULT_ADMIN_ROLE, defaultAdmin());
        _grantRole(DEFAULT_ADMIN_ROLE, newAdmin);
        delete _pendingDefaultAdmin;
        delete _pendingDefaultAdminSchedule;
    }

    ///
    /// AccessControlDefaultAdminRules public and internal setters for defaultAdminDelay/pendingDefaultAdminDelay
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function changeDefaultAdminDelay(uint48 newDelay) public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _changeDefaultAdminDelay(newDelay);
    }

    /**
     * @dev See {changeDefaultAdminDelay}.
     *
     * Internal function without access restriction.
     */
    function _changeDefaultAdminDelay(uint48 newDelay) internal virtual {
        uint48 newSchedule = SafeCast.toUint48(block.timestamp) + _delayChangeWait(newDelay);
        _setPendingDelay(newDelay, newSchedule);
        emit DefaultAdminDelayChangeScheduled(newDelay, newSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function rollbackDefaultAdminDelay() public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _rollbackDefaultAdminDelay();
    }

    /**
     * @dev See {rollbackDefaultAdminDelay}.
     *
     * Internal function without access restriction.
     */
    function _rollbackDefaultAdminDelay() internal virtual {
        _setPendingDelay(0, 0);
    }

    /**
     * @dev Returns the amount of seconds to wait after the `newDelay` will
     * become the new {defaultAdminDelay}.
     *
     * The value returned guarantees that if the delay is reduced, it will go into effect
     * after a wait that honors the previously set delay.
     *
     * See {defaultAdminDelayIncreaseWait}.
     */
    function _delayChangeWait(uint48 newDelay) internal view virtual returns (uint48) {
        uint48 currentDelay = defaultAdminDelay();

        // When increasing the delay, we schedule the delay change to occur after a period of "new delay" has passed, up
        // to a maximum given by defaultAdminDelayIncreaseWait, by default 5 days. For example, if increasing from 1 day
        // to 3 days, the new delay will come into effect after 3 days. If increasing from 1 day to 10 days, the new
        // delay will come into effect after 5 days. The 5 day wait period is intended to be able to fix an error like
        // using milliseconds instead of seconds.
        //
        // When decreasing the delay, we wait the difference between "current delay" and "new delay". This guarantees
        // that an admin transfer cannot be made faster than "current delay" at the time the delay change is scheduled.
        // For example, if decreasing from 10 days to 3 days, the new delay will come into effect after 7 days.
        return
            newDelay > currentDelay
                ? uint48(Math.min(newDelay, defaultAdminDelayIncreaseWait())) // no need to safecast, both inputs are uint48
                : currentDelay - newDelay;
    }

    ///
    /// Private setters
    ///

    /**
     * @dev Setter of the tuple for pending admin and its schedule.
     *
     * May emit a DefaultAdminTransferCanceled event.
     */
    function _setPendingDefaultAdmin(address newAdmin, uint48 newSchedule) private {
        (, uint48 oldSchedule) = pendingDefaultAdmin();

        _pendingDefaultAdmin = newAdmin;
        _pendingDefaultAdminSchedule = newSchedule;

        // An `oldSchedule` from `pendingDefaultAdmin()` is only set if it hasn't been accepted.
        if (_isScheduleSet(oldSchedule)) {
            // Emit for implicit cancellations when another default admin was scheduled.
            emit DefaultAdminTransferCanceled();
        }
    }

    /**
     * @dev Setter of the tuple for pending delay and its schedule.
     *
     * May emit a DefaultAdminDelayChangeCanceled event.
     */
    function _setPendingDelay(uint48 newDelay, uint48 newSchedule) private {
        uint48 oldSchedule = _pendingDelaySchedule;

        if (_isScheduleSet(oldSchedule)) {
            if (_hasSchedulePassed(oldSchedule)) {
                // Materialize a virtual delay
                _currentDelay = _pendingDelay;
            } else {
                // Emit for implicit cancellations when another delay was scheduled.
                emit DefaultAdminDelayChangeCanceled();
            }
        }

        _pendingDelay = newDelay;
        _pendingDelaySchedule = newSchedule;
    }

    ///
    /// Private helpers
    ///

    /**
     * @dev Defines if an `schedule` is considered set. For consistency purposes.
     */
    function _isScheduleSet(uint48 schedule) private pure returns (bool) {
        return schedule != 0;
    }

    /**
     * @dev Defines if an `schedule` is considered passed. For consistency purposes.
     */
    function _hasSchedulePassed(uint48 schedule) private view returns (bool) {
        return schedule < block.timestamp;
    }
}

File 4 of 25 : IAccessControlDefaultAdminRules.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/extensions/IAccessControlDefaultAdminRules.sol)

pragma solidity ^0.8.20;

import {IAccessControl} from "../IAccessControl.sol";

/**
 * @dev External interface of AccessControlDefaultAdminRules declared to support ERC165 detection.
 */
interface IAccessControlDefaultAdminRules is IAccessControl {
    /**
     * @dev The new default admin is not a valid default admin.
     */
    error AccessControlInvalidDefaultAdmin(address defaultAdmin);

    /**
     * @dev At least one of the following rules was violated:
     *
     * - The `DEFAULT_ADMIN_ROLE` must only be managed by itself.
     * - The `DEFAULT_ADMIN_ROLE` must only be held by one account at the time.
     * - Any `DEFAULT_ADMIN_ROLE` transfer must be in two delayed steps.
     */
    error AccessControlEnforcedDefaultAdminRules();

    /**
     * @dev The delay for transferring the default admin delay is enforced and
     * the operation must wait until `schedule`.
     *
     * NOTE: `schedule` can be 0 indicating there's no transfer scheduled.
     */
    error AccessControlEnforcedDefaultAdminDelay(uint48 schedule);

    /**
     * @dev Emitted when a {defaultAdmin} transfer is started, setting `newAdmin` as the next
     * address to become the {defaultAdmin} by calling {acceptDefaultAdminTransfer} only after `acceptSchedule`
     * passes.
     */
    event DefaultAdminTransferScheduled(address indexed newAdmin, uint48 acceptSchedule);

    /**
     * @dev Emitted when a {pendingDefaultAdmin} is reset if it was never accepted, regardless of its schedule.
     */
    event DefaultAdminTransferCanceled();

    /**
     * @dev Emitted when a {defaultAdminDelay} change is started, setting `newDelay` as the next
     * delay to be applied between default admin transfer after `effectSchedule` has passed.
     */
    event DefaultAdminDelayChangeScheduled(uint48 newDelay, uint48 effectSchedule);

    /**
     * @dev Emitted when a {pendingDefaultAdminDelay} is reset if its schedule didn't pass.
     */
    event DefaultAdminDelayChangeCanceled();

    /**
     * @dev Returns the address of the current `DEFAULT_ADMIN_ROLE` holder.
     */
    function defaultAdmin() external view returns (address);

    /**
     * @dev Returns a tuple of a `newAdmin` and an accept schedule.
     *
     * After the `schedule` passes, the `newAdmin` will be able to accept the {defaultAdmin} role
     * by calling {acceptDefaultAdminTransfer}, completing the role transfer.
     *
     * A zero value only in `acceptSchedule` indicates no pending admin transfer.
     *
     * NOTE: A zero address `newAdmin` means that {defaultAdmin} is being renounced.
     */
    function pendingDefaultAdmin() external view returns (address newAdmin, uint48 acceptSchedule);

    /**
     * @dev Returns the delay required to schedule the acceptance of a {defaultAdmin} transfer started.
     *
     * This delay will be added to the current timestamp when calling {beginDefaultAdminTransfer} to set
     * the acceptance schedule.
     *
     * NOTE: If a delay change has been scheduled, it will take effect as soon as the schedule passes, making this
     * function returns the new delay. See {changeDefaultAdminDelay}.
     */
    function defaultAdminDelay() external view returns (uint48);

    /**
     * @dev Returns a tuple of `newDelay` and an effect schedule.
     *
     * After the `schedule` passes, the `newDelay` will get into effect immediately for every
     * new {defaultAdmin} transfer started with {beginDefaultAdminTransfer}.
     *
     * A zero value only in `effectSchedule` indicates no pending delay change.
     *
     * NOTE: A zero value only for `newDelay` means that the next {defaultAdminDelay}
     * will be zero after the effect schedule.
     */
    function pendingDefaultAdminDelay() external view returns (uint48 newDelay, uint48 effectSchedule);

    /**
     * @dev Starts a {defaultAdmin} transfer by setting a {pendingDefaultAdmin} scheduled for acceptance
     * after the current timestamp plus a {defaultAdminDelay}.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * Emits a DefaultAdminRoleChangeStarted event.
     */
    function beginDefaultAdminTransfer(address newAdmin) external;

    /**
     * @dev Cancels a {defaultAdmin} transfer previously started with {beginDefaultAdminTransfer}.
     *
     * A {pendingDefaultAdmin} not yet accepted can also be cancelled with this function.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * May emit a DefaultAdminTransferCanceled event.
     */
    function cancelDefaultAdminTransfer() external;

    /**
     * @dev Completes a {defaultAdmin} transfer previously started with {beginDefaultAdminTransfer}.
     *
     * After calling the function:
     *
     * - `DEFAULT_ADMIN_ROLE` should be granted to the caller.
     * - `DEFAULT_ADMIN_ROLE` should be revoked from the previous holder.
     * - {pendingDefaultAdmin} should be reset to zero values.
     *
     * Requirements:
     *
     * - Only can be called by the {pendingDefaultAdmin}'s `newAdmin`.
     * - The {pendingDefaultAdmin}'s `acceptSchedule` should've passed.
     */
    function acceptDefaultAdminTransfer() external;

    /**
     * @dev Initiates a {defaultAdminDelay} update by setting a {pendingDefaultAdminDelay} scheduled for getting
     * into effect after the current timestamp plus a {defaultAdminDelay}.
     *
     * This function guarantees that any call to {beginDefaultAdminTransfer} done between the timestamp this
     * method is called and the {pendingDefaultAdminDelay} effect schedule will use the current {defaultAdminDelay}
     * set before calling.
     *
     * The {pendingDefaultAdminDelay}'s effect schedule is defined in a way that waiting until the schedule and then
     * calling {beginDefaultAdminTransfer} with the new delay will take at least the same as another {defaultAdmin}
     * complete transfer (including acceptance).
     *
     * The schedule is designed for two scenarios:
     *
     * - When the delay is changed for a larger one the schedule is `block.timestamp + newDelay` capped by
     * {defaultAdminDelayIncreaseWait}.
     * - When the delay is changed for a shorter one, the schedule is `block.timestamp + (current delay - new delay)`.
     *
     * A {pendingDefaultAdminDelay} that never got into effect will be canceled in favor of a new scheduled change.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * Emits a DefaultAdminDelayChangeScheduled event and may emit a DefaultAdminDelayChangeCanceled event.
     */
    function changeDefaultAdminDelay(uint48 newDelay) external;

    /**
     * @dev Cancels a scheduled {defaultAdminDelay} change.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * May emit a DefaultAdminDelayChangeCanceled event.
     */
    function rollbackDefaultAdminDelay() external;

    /**
     * @dev Maximum time in seconds for an increase to {defaultAdminDelay} (that is scheduled using {changeDefaultAdminDelay})
     * to take effect. Default to 5 days.
     *
     * When the {defaultAdminDelay} is scheduled to be increased, it goes into effect after the new delay has passed with
     * the purpose of giving enough time for reverting any accidental change (i.e. using milliseconds instead of seconds)
     * that may lock the contract. However, to avoid excessive schedules, the wait is capped by this function and it can
     * be overrode for a custom {defaultAdminDelay} increase scheduling.
     *
     * IMPORTANT: Make sure to add a reasonable amount of time while overriding this value, otherwise,
     * there's a risk of setting a high new delay that goes into effect almost immediately without the
     * possibility of human intervention in the case of an input error (eg. set milliseconds instead of seconds).
     */
    function defaultAdminDelayIncreaseWait() external view returns (uint48);
}

File 5 of 25 : IAccessControl.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/IAccessControl.sol)

pragma solidity ^0.8.20;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);

    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}

File 6 of 25 : IERC5313.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5313.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface for the Light Contract Ownership Standard.
 *
 * A standardized minimal interface required to identify an account that controls a contract
 */
interface IERC5313 {
    /**
     * @dev Gets the address of the owner.
     */
    function owner() external view returns (address);
}

File 7 of 25 : IERC20Permit.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

File 8 of 25 : IERC20.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

File 9 of 25 : SafeERC20.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

File 10 of 25 : Address.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

File 11 of 25 : Context.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

File 12 of 25 : ERC165.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

File 13 of 25 : IERC165.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

File 14 of 25 : Math.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

File 15 of 25 : SafeCast.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }
}

File 16 of 25 : ReentrancyGuard.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

File 17 of 25 : BytesLib.sol
// SPDX-License-Identifier: Unlicense
/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;


library BytesLib {
    function concat(
        bytes memory _preBytes,
        bytes memory _postBytes
    )
        internal
        pure
        returns (bytes memory)
    {
        bytes memory tempBytes;

        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)

            // Store the length of the first bytes array at the beginning of
            // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)

            // Maintain a memory counter for the current write location in the
            // temp bytes array by adding the 32 bytes for the array length to
            // the starting location.
            let mc := add(tempBytes, 0x20)
            // Stop copying when the memory counter reaches the length of the
            // first bytes array.
            let end := add(mc, length)

            for {
                // Initialize a copy counter to the start of the _preBytes data,
                // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
                // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                // Write the _preBytes data into the tempBytes memory 32 bytes
                // at a time.
                mstore(mc, mload(cc))
            }

            // Add the length of _postBytes to the current length of tempBytes
            // and store it as the new length in the first 32 bytes of the
            // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))

            // Move the memory counter back from a multiple of 0x20 to the
            // actual end of the _preBytes data.
            mc := end
            // Stop copying when the memory counter reaches the new combined
            // length of the arrays.
            end := add(mc, length)

            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }

            // Update the free-memory pointer by padding our last write location
            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
            // next 32 byte block, then round down to the nearest multiple of
            // 32. If the sum of the length of the two arrays is zero then add
            // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(0x40, and(
              add(add(end, iszero(add(length, mload(_preBytes)))), 31),
              not(31) // Round down to the nearest 32 bytes.
            ))
        }

        return tempBytes;
    }

    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
            // Read the first 32 bytes of _preBytes storage, which is the length
            // of the array. (We don't need to use the offset into the slot
            // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
                // Since the new array still fits in the slot, we just need to
                // update the contents of the slot.
                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                    _preBytes.slot,
                    // all the modifications to the slot are inside this
                    // next block
                    add(
                        // we can just add to the slot contents because the
                        // bytes we want to change are the LSBs
                        fslot,
                        add(
                            mul(
                                div(
                                    // load the bytes from memory
                                    mload(add(_postBytes, 0x20)),
                                    // zero all bytes to the right
                                    exp(0x100, sub(32, mlength))
                                ),
                                // and now shift left the number of bytes to
                                // leave space for the length in the slot
                                exp(0x100, sub(32, newlength))
                            ),
                            // increase length by the double of the memory
                            // bytes length
                            mul(mlength, 2)
                        )
                    )
                )
            }
            case 1 {
                // The stored value fits in the slot, but the combined value
                // will exceed it.
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // The contents of the _postBytes array start 32 bytes into
                // the structure. Our first read should obtain the `submod`
                // bytes that can fit into the unused space in the last word
                // of the stored array. To get this, we read 32 bytes starting
                // from `submod`, so the data we read overlaps with the array
                // contents by `submod` bytes. Masking the lowest-order
                // `submod` bytes allows us to add that value directly to the
                // stored value.

                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(
                    sc,
                    add(
                        and(
                            fslot,
                            0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
                        ),
                        and(mload(mc), mask)
                    )
                )

                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // Copy over the first `submod` bytes of the new data as in
                // case 1 above.
                let slengthmod := mod(slength, 32)
                let mlengthmod := mod(mlength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(sload(sc), and(mload(mc), mask)))

                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }

    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    )
        internal
        pure
        returns (bytes memory)
    {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1 , "toUint8_outOfBounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }

        return tempUint;
    }

    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }

        return tempUint;
    }

    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }

        return tempUint;
    }

    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }

        return tempUint;
    }

    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }

        return tempUint;
    }

    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }

    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(_postBytes, 0x20)
                // the next line is the loop condition:
                // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equal_nonAligned(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let endMinusWord := add(_preBytes, length)
                let mc := add(_preBytes, 0x20)
                let cc := add(_postBytes, 0x20)

                for {
                // the next line is the loop condition:
                // while(uint256(mc < endWord) + cb == 2)
                } eq(add(lt(mc, endMinusWord), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }

                // Only if still successful
                // For <1 word tail bytes
                if gt(success, 0) {
                    // Get the remainder of length/32
                    // length % 32 = AND(length, 32 - 1)
                    let numTailBytes := and(length, 0x1f)
                    let mcRem := mload(mc)
                    let ccRem := mload(cc)
                    for {
                        let i := 0
                    // the next line is the loop condition:
                    // while(uint256(i < numTailBytes) + cb == 2)
                    } eq(add(lt(i, numTailBytes), cb), 2) {
                        i := add(i, 1)
                    } {
                        if iszero(eq(byte(i, mcRem), byte(i, ccRem))) {
                            // unsuccess:
                            success := 0
                            cb := 0
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equalStorage(
        bytes storage _preBytes,
        bytes memory _postBytes
    )
        internal
        view
        returns (bool)
    {
        bool success = true;

        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
            // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // slength can contain both the length and contents of the array
                // if length < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1

                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                        // the next line is the loop condition:
                        // while(uint256(mc < end) + cb == 2)
                        for {} eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }
}

File 18 of 25 : BridgeMessenger.sol
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.20;

import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import "./interfaces/IBridgeRouter.sol";
import "./libraries/Messages.sol";

abstract contract BridgeMessenger is ReentrancyGuard {
    error InvalidBridgeRouter(address router);
    error CannotReceiveMessage(bytes32 messageId);
    error CannotReverseMessage(bytes32 messageId);

    IBridgeRouter internal immutable bridgeRouter;

    modifier onlyRouter() {
        if (msg.sender != address(bridgeRouter)) revert InvalidBridgeRouter(msg.sender);
        _;
    }

    constructor(IBridgeRouter bridgeRouter_) {
        bridgeRouter = bridgeRouter_;
    }

    function receiveMessage(Messages.MessageReceived memory message) external virtual onlyRouter nonReentrant {
        _receiveMessage(message);
    }

    function reverseMessage(
        Messages.MessageReceived memory message,
        bytes memory extraArgs
    ) external virtual onlyRouter nonReentrant {
        _reverseMessage(message, extraArgs);
    }

    function getBridgeRouter() public view returns (address) {
        return address(bridgeRouter);
    }

    function _sendMessage(Messages.MessageToSend memory message, uint256 feeAmount) internal virtual {
        bridgeRouter.sendMessage{ value: feeAmount }(message);
    }

    function _receiveMessage(Messages.MessageReceived memory message) internal virtual;

    function _reverseMessage(Messages.MessageReceived memory message, bytes memory extraArgs) internal virtual;
}

File 19 of 25 : IBridgeAdapter.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.8.20;

import "../libraries/Messages.sol";

interface IBridgeAdapter {
    event SendMessage(bytes32 operationId, Messages.MessageToSend message);
    event ReceiveMessage(bytes32 indexed messageId);

    error ChainAlreadyAdded(uint16 chainId);
    error ChainUnavailable(uint16 chainId);
    error InvalidBridgeRouter(address router);
    error InvalidMessageSender(bytes32 sourceAddress);
    error InvalidFinalityLevel(uint64 finalityLevel);
    error InvalidTokenAddress(bytes32 token);
    error InvalidReceivedAmount(uint256 expected, uint256 actual);
    error UnsupportedFinalityLevel(uint64 finalityLevel);
    error UnsupportedExtraArgs();
    error EmptyExtraArgs();

    function MANAGER_ROLE() external view returns (bytes32);

    function getSendFee(Messages.MessageToSend memory message) external view returns (uint256 fee);

    function sendMessage(Messages.MessageToSend memory message) external payable;

    /**
     * @notice Determine if chain is available to send messages to
     * @param chainId destination chain (as defined by Folks)
     * @return isAvailable whether is available
     */
    function isChainAvailable(uint16 chainId) external view returns (bool);
}

File 20 of 25 : IBridgeRouter.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.8.20;

import "./IBridgeAdapter.sol";
import "../libraries/Messages.sol";

interface IBridgeRouter {
    function MANAGER_ROLE() external view returns (bytes32);
    function MESSAGE_SENDER_ROLE() external view returns (bytes32);

    function getAdapter(uint16 adapterId) external view returns (IBridgeAdapter);

    function getSendFee(Messages.MessageToSend memory message) external view returns (uint256);

    function sendMessage(Messages.MessageToSend memory message) external payable;

    function receiveMessage(Messages.MessageReceived memory message) external payable;
}

File 21 of 25 : Messages.sol
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.20;

import "@solidity-bytes-utils/contracts/BytesLib.sol";

library Messages {
    using BytesLib for bytes;

    error InvalidExtraArgsTag();

    struct MessageParams {
        uint16 adapterId; // where to route message through
        uint16 returnAdapterId; // if applicable, where to route message through for return message
        uint256 receiverValue; // amount of value to attach for receive message
        uint256 gasLimit; // gas limit for receive message
        uint256 returnGasLimit; // if applicable, gas limit for return message
    }

    struct MessageToSend {
        Messages.MessageParams params; // message parameters
        bytes32 sender; // source address which sent the message
        uint16 destinationChainId; // chain to send message to
        bytes32 handler; // address to handle the message received
        bytes payload; // message payload
        uint64 finalityLevel; // zero for immediate, non-zero for finalised
        bytes extraArgs;
    }

    // bytes4(keccak256("Folks ExtraArgsV1));
    bytes4 public constant EXTRA_ARGS_V1_TAG = 0x1b366e79;
    struct ExtraArgsV1 {
        bytes32 token;
        bytes32 recipient;
        uint256 amount;
    }

    function extraArgsToBytes(ExtraArgsV1 memory extraArgs) internal pure returns (bytes memory bts) {
        return abi.encodeWithSelector(EXTRA_ARGS_V1_TAG, extraArgs);
    }

    function bytesToExtraArgs(bytes calldata bts) internal pure returns (Messages.ExtraArgsV1 memory extraArgs) {
        if (bts.length > 0) {
            if (bytes4(bts) != EXTRA_ARGS_V1_TAG) revert InvalidExtraArgsTag();
            extraArgs = abi.decode(bts[4:], (Messages.ExtraArgsV1));
        }
    }

    struct MessageReceived {
        bytes32 messageId; // uniquie identifier for message when combined with adapter id
        uint16 sourceChainId; // chain where message is sent from
        bytes32 sourceAddress; // address where message is sent from (e.g. spoke)
        bytes32 handler; // address of smart contract (which inherits from BridgeMessenger) to handle message received
        bytes payload; // message payload
        uint16 returnAdapterId; // if applicable, where to route message through for return message
        uint256 returnGasLimit; // if applicable, gas limit for return message
    }

    function convertEVMAddressToGenericAddress(address addr) internal pure returns (bytes32) {
        return bytes32(uint256(uint160(addr)));
    }

    function convertGenericAddressToEVMAddress(bytes32 addr) internal pure returns (address) {
        return address(uint160(uint256(addr)));
    }

    enum Action {
        // SPOKE -> HUB
        CreateAccount,
        InviteAddress,
        AcceptInviteAddress,
        UnregisterAddress,
        AddDelegate,
        RemoveDelegate,
        CreateLoan,
        DeleteLoan,
        CreateLoanAndDeposit,
        Deposit,
        DepositFToken,
        Withdraw,
        WithdrawFToken,
        Borrow,
        Repay,
        RepayWithCollateral,
        Liquidate,
        SwitchBorrowType,
        // HUB -> SPOKE
        SendToken
    }

    struct MessagePayload {
        Action action;
        bytes32 accountId;
        bytes32 userAddress;
        bytes data;
    }

    function encodeMessagePayload(MessagePayload memory payload) internal pure returns (bytes memory) {
        return abi.encodePacked(uint16(payload.action), payload.accountId, payload.userAddress, payload.data);
    }

    function decodeActionPayload(bytes memory serialized) internal pure returns (MessagePayload memory payload) {
        uint256 index = 0;
        payload.action = Action(serialized.toUint16(index));
        index += 2;
        payload.accountId = serialized.toBytes32(index);
        index += 32;
        payload.userAddress = serialized.toBytes32(index);
        index += 32;
        payload.data = serialized.slice(index, serialized.length - index);
    }

    struct MessageMetadata {
        uint16 returnAdapterId;
        uint256 returnGasLimit;
        bytes32 sender;
        bytes32 handler;
    }

    function encodePayloadWithMetadata(Messages.MessageToSend memory message) internal pure returns (bytes memory) {
        return
            abi.encodePacked(
                message.params.returnAdapterId,
                message.params.returnGasLimit,
                message.sender,
                message.handler,
                message.payload
            );
    }

    function decodePayloadWithMetadata(
        bytes memory serialized
    ) internal pure returns (MessageMetadata memory metadata, bytes memory payload) {
        uint256 index = 0;
        metadata.returnAdapterId = serialized.toUint16(index);
        index += 2;
        metadata.returnGasLimit = serialized.toUint256(index);
        index += 32;
        metadata.sender = serialized.toBytes32(index);
        index += 32;
        metadata.handler = serialized.toBytes32(index);
        index += 32;
        payload = serialized.slice(index, serialized.length - index);
    }
}

File 22 of 25 : IAddressOracle.sol
// SPDX-License-Identifier: MIT
pragma solidity 0.8.20;

interface IAddressOracle {
    error AddressIneligible(address addr, uint16 action);

    function isEligible(address addr, uint16 action) external view returns (bool);
}

File 23 of 25 : RateLimited.sol
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.20;

import "@openzeppelin/contracts/access/extensions/AccessControlDefaultAdminRules.sol";
import "@openzeppelin/contracts/utils/math/Math.sol";

abstract contract RateLimited is AccessControlDefaultAdminRules {
    bytes32 public constant CONFIG_RATE_LIMIT_ROLE = keccak256("CONFIG_RATE_LIMIT");
    bytes32 public constant BOOST_RATE_LIMIT_ROLE = keccak256("BOOST_RATE_LIMIT");

    error PeriodTooLow();
    error PeriodTooHigh();
    error InvalidOffset();
    error InsufficientCapacity(uint256 capacity, uint256 requested);

    event PeriodUpdated(uint256 periodNumber, uint256 capacity);
    event CapacityIncreased(uint256 periodNumber, uint256 amount, uint256 newCapacity);
    event CapacityDecreased(uint256 periodNumber, uint256 amount, uint256 newCapacity);

    struct BucketConfig {
        uint32 period; // length of time in seconds before limit resets (1 hour - 1 week)
        uint32 offset; // used to control when change in period occurs
        uint256 limit; // max to consume per period
    }

    BucketConfig public bucketConfig;
    uint32 public currentPeriodNumber; // the period we are in
    uint256 public currentCapacity; // capacity in period

    /**
     * @notice Contructor
     * @param admin The default admin for RateLimiter
     * @param bucketConfig_ The initial bucket configuration
     */
    constructor(address admin, BucketConfig memory bucketConfig_) {
        _setBucketConfig(bucketConfig_);
        _grantRole(CONFIG_RATE_LIMIT_ROLE, admin);
        _grantRole(BOOST_RATE_LIMIT_ROLE, admin);
    }

    function setBucketConfig(BucketConfig memory newBucketConfig) external onlyRole(CONFIG_RATE_LIMIT_ROLE) {
        _setBucketConfig(newBucketConfig);
    }

    function boostCapacity(uint256 amount) external onlyRole(BOOST_RATE_LIMIT_ROLE) {
        _updatePeriod();

        // boost capacity temporarily
        currentCapacity += amount;
    }

    function _setBucketConfig(BucketConfig memory newBucketConfig) internal {
        if (newBucketConfig.period < 1 hours) revert PeriodTooLow();
        if (newBucketConfig.period > 1 weeks) revert PeriodTooHigh();
        if (newBucketConfig.offset >= newBucketConfig.period) revert InvalidOffset();

        // period is updated next time capacity is increased/decreased
        bucketConfig = newBucketConfig;
    }

    function _updatePeriod() internal {
        uint32 periodNumber = (uint32(block.timestamp) + bucketConfig.offset) / bucketConfig.period;

        // if new period, reset capacity
        if (periodNumber != currentPeriodNumber) {
            currentPeriodNumber = periodNumber;
            currentCapacity = Math.max(_minLimit(), bucketConfig.limit);

            emit PeriodUpdated(periodNumber, currentCapacity);
        }
    }

    function _decreaseCapacity(uint256 amount) internal {
        _updatePeriod();

        // decrease capacity if availablity to
        if (currentCapacity < amount) revert InsufficientCapacity(currentCapacity, amount);
        currentCapacity -= amount;

        emit CapacityDecreased(currentPeriodNumber, amount, currentCapacity);
    }

    function _increaseCapacity(uint256 amount) internal {
        _updatePeriod();

        // increase capacity without overflowing
        unchecked {
            uint256 newCapacity = currentCapacity + amount;
            currentCapacity = newCapacity < currentCapacity ? type(uint256).max : newCapacity;
        }

        emit CapacityIncreased(currentPeriodNumber, amount, currentCapacity);
    }

    function _minLimit() internal view virtual returns (uint256);
}

File 24 of 25 : SpokeState.sol
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.20;

import "@openzeppelin/contracts/access/extensions/AccessControlDefaultAdminRules.sol";
import "./interfaces/IAddressOracle.sol";

contract SpokeState is AccessControlDefaultAdminRules {
    struct Hub {
        uint16 chainId;
        bytes32 contractAddress;
    }

    bytes32 public constant CONFIG_CONTRACTS_ROLE = keccak256("CONFIG_CONTRACTS");

    Hub internal _hub;
    IAddressOracle internal _addressOracle;

    constructor(
        address admin,
        uint16 hubChainId,
        bytes32 hubContractAddress,
        IAddressOracle addressOracle_
    ) AccessControlDefaultAdminRules(1 days, admin) {
        _setHub(hubChainId, hubContractAddress);
        _setAddressOracle(addressOracle_);
        _grantRole(CONFIG_CONTRACTS_ROLE, admin);
    }

    function setHub(uint16 chainId, bytes32 contractAddress) external onlyRole(CONFIG_CONTRACTS_ROLE) {
        _setHub(chainId, contractAddress);
    }

    function setAddressOracle(IAddressOracle newAddressOracle) external onlyRole(CONFIG_CONTRACTS_ROLE) {
        _setAddressOracle(newAddressOracle);
    }

    function _setHub(uint16 chainId, bytes32 contractAddress) internal {
        _hub = SpokeState.Hub({ chainId: chainId, contractAddress: contractAddress });
    }

    function _setAddressOracle(IAddressOracle newAddressOracle) internal {
        _addressOracle = newAddressOracle;
    }

    function getHubChainId() public view returns (uint16) {
        return _hub.chainId;
    }

    function getHubContractAddress() public view returns (bytes32) {
        return _hub.contractAddress;
    }

    function getAddressOracle() public view returns (address) {
        return address(_addressOracle);
    }
}

File 25 of 25 : SpokeToken.sol
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.20;

import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@solidity-bytes-utils/contracts/BytesLib.sol";

import "../bridge/BridgeMessenger.sol";
import "../bridge/interfaces/IBridgeRouter.sol";
import "../bridge/libraries/Messages.sol";
import "./interfaces/IAddressOracle.sol";
import "./RateLimited.sol";
import "./SpokeState.sol";

abstract contract SpokeToken is BridgeMessenger, SpokeState, RateLimited {
    using BytesLib for bytes;

    error HubUnknown(uint16 chainId, bytes32 addr);

    uint8 public immutable poolId;

    constructor(
        address admin,
        IBridgeRouter bridgeRouter,
        uint16 hubChainId,
        bytes32 hubContractAddress,
        IAddressOracle addressOracle,
        BucketConfig memory bucketConfig,
        uint8 poolId_
    )
        BridgeMessenger(bridgeRouter)
        SpokeState(admin, hubChainId, hubContractAddress, addressOracle)
        RateLimited(admin, bucketConfig)
    {
        poolId = poolId_;
    }

    /**
     * @notice Create loan and deposit token into new loan
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id of the loan
     * @param loanId The loan id to create and deposit into
     * @param amount The amount to deposit
     * @param loanTypeId The load type to create
     * @param loanName The loan name to help identify the loan to user
     */
    function createLoanAndDeposit(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes32 loanId,
        uint256 amount,
        uint16 loanTypeId,
        bytes32 loanName
    ) external payable nonReentrant {
        _doOperation(
            params,
            Messages.Action.CreateLoanAndDeposit,
            accountId,
            amount,
            abi.encodePacked(loanId, poolId, amount, loanTypeId, loanName)
        );
    }

    /**
     * @notice Deposit token into specified loan
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id of the loan
     * @param loanId The loan id to deposit into
     * @param amount The amount to deposit
     */
    function deposit(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes32 loanId,
        uint256 amount
    ) external payable nonReentrant {
        _doOperation(params, Messages.Action.Deposit, accountId, amount, abi.encodePacked(loanId, poolId, amount));
    }

    /**
     * @notice Repay borrow in specified loan
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id of the loan
     * @param loanId The loan id to repay in
     * @param amount The amount to repay
     * @param maxOverRepayment The maximum acceptable threshold to over-repay by (excess not refunded)
     */
    function repay(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes32 loanId,
        uint256 amount,
        uint256 maxOverRepayment
    ) external payable nonReentrant {
        _doOperation(
            params,
            Messages.Action.Repay,
            accountId,
            amount,
            abi.encodePacked(loanId, poolId, amount, maxOverRepayment)
        );
    }

    function _doOperation(
        Messages.MessageParams memory params,
        Messages.Action action,
        bytes32 accountId,
        uint256 amount,
        bytes memory data
    ) internal {
        // check sender is eligible to do given action
        if (!_addressOracle.isEligible(msg.sender, uint16(action)))
            revert IAddressOracle.AddressIneligible(msg.sender, uint16(action));

        // increase rate limit token capacity temporarily for period
        _increaseCapacity(amount);

        // receive tokens from msg.sender
        (bytes memory extraArgs, uint256 feeAmount) = _receiveToken(params, amount);

        // construct message
        Messages.MessageToSend memory message = Messages.MessageToSend({
            params: params,
            sender: Messages.convertEVMAddressToGenericAddress(address(this)),
            destinationChainId: _hub.chainId,
            handler: _hub.contractAddress,
            payload: Messages.encodeMessagePayload(
                Messages.MessagePayload({
                    action: action,
                    accountId: accountId,
                    userAddress: Messages.convertEVMAddressToGenericAddress(msg.sender),
                    data: data
                })
            ),
            finalityLevel: 1, // finalised
            extraArgs: extraArgs
        });

        // send message
        _sendMessage(message, feeAmount);
    }

    /**
     * @notice Receive token from msg.sender into Spoke (or adapter if being bridged)
     * @param params The parameters for sending message to hub chain
     * @param amount The amount of token to receive
     * @return extraArgs needed when sending message and fee amount to use
     */
    function _receiveToken(
        Messages.MessageParams memory params,
        uint256 amount
    ) internal virtual returns (bytes memory extraArgs, uint256 feeAmount);

    /**
     * @notice Send token from Spoke to recipient
     * @param recipient The token recipient
     * @param amount The amount of token to send
     */
    function _sendToken(address recipient, uint256 amount) internal virtual;

    function _receiveMessage(Messages.MessageReceived memory message) internal override {
        Messages.MessagePayload memory payload = Messages.decodeActionPayload(message.payload);

        // ensure message sender is recognised
        bool isHub = message.sourceChainId == _hub.chainId && message.sourceAddress == _hub.contractAddress;
        if (!isHub) revert HubUnknown(message.sourceChainId, message.sourceAddress);

        // switch on payload action
        uint256 index = 0;
        if (payload.action == Messages.Action.SendToken) {
            address recipient = Messages.convertGenericAddressToEVMAddress(payload.userAddress);
            uint256 amount = payload.data.toUint256(index);

            // ensure capacity is sufficient, and if so, send token to user
            _decreaseCapacity(amount);
            _sendToken(recipient, amount);
        } else {
            revert CannotReceiveMessage(message.messageId);
        }
    }

    function _reverseMessage(Messages.MessageReceived memory message, bytes memory) internal pure override {
        revert CannotReverseMessage(message.messageId);
    }
}

Settings
{
  "evmVersion": "paris",
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

Contract ABI

[{"inputs":[{"internalType":"address","name":"admin","type":"address"},{"internalType":"contract IBridgeRouter","name":"bridgeRouter","type":"address"},{"internalType":"uint16","name":"hubChainId","type":"uint16"},{"internalType":"bytes32","name":"hubContractAddress","type":"bytes32"},{"internalType":"contract IAddressOracle","name":"addressOracle","type":"address"},{"components":[{"internalType":"uint32","name":"period","type":"uint32"},{"internalType":"uint32","name":"offset","type":"uint32"},{"internalType":"uint256","name":"limit","type":"uint256"}],"internalType":"struct RateLimited.BucketConfig","name":"bucketConfig","type":"tuple"},{"internalType":"uint8","name":"poolId","type":"uint8"},{"internalType":"address","name":"token_","type":"address"},{"internalType":"bytes32","name":"hubTokenPoolAddress_","type":"bytes32"},{"internalType":"uint256","name":"minBucketLimit_","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AccessControlBadConfirmation","type":"error"},{"inputs":[{"internalType":"uint48","name":"schedule","type":"uint48"}],"name":"AccessControlEnforcedDefaultAdminDelay","type":"error"},{"inputs":[],"name":"AccessControlEnforcedDefaultAdminRules","type":"error"},{"inputs":[{"internalType":"address","name":"defaultAdmin","type":"address"}],"name":"AccessControlInvalidDefaultAdmin","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bytes32","name":"neededRole","type":"bytes32"}],"name":"AccessControlUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"addr","type":"address"},{"internalType":"uint16","name":"action","type":"uint16"}],"name":"AddressIneligible","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[{"internalType":"bytes32","name":"messageId","type":"bytes32"}],"name":"CannotReceiveMessage","type":"error"},{"inputs":[{"internalType":"bytes32","name":"messageId","type":"bytes32"}],"name":"CannotReverseMessage","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"uint16","name":"chainId","type":"uint16"},{"internalType":"bytes32","name":"addr","type":"bytes32"}],"name":"HubUnknown","type":"error"},{"inputs":[{"internalType":"uint256","name":"capacity","type":"uint256"},{"internalType":"uint256","name":"requested","type":"uint256"}],"name":"InsufficientCapacity","type":"error"},{"inputs":[{"internalType":"address","name":"router","type":"address"}],"name":"InvalidBridgeRouter","type":"error"},{"inputs":[],"name":"InvalidOffset","type":"error"},{"inputs":[],"name":"PeriodTooHigh","type":"error"},{"inputs":[],"name":"PeriodTooLow","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"uint8","name":"bits","type":"uint8"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"SafeCastOverflowedUintDowncast","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"periodNumber","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newCapacity","type":"uint256"}],"name":"CapacityDecreased","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"periodNumber","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"newCapacity","type":"uint256"}],"name":"CapacityIncreased","type":"event"},{"anonymous":false,"inputs":[],"name":"DefaultAdminDelayChangeCanceled","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint48","name":"newDelay","type":"uint48"},{"indexed":false,"internalType":"uint48","name":"effectSchedule","type":"uint48"}],"name":"DefaultAdminDelayChangeScheduled","type":"event"},{"anonymous":false,"inputs":[],"name":"DefaultAdminTransferCanceled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newAdmin","type":"address"},{"indexed":false,"internalType":"uint48","name":"acceptSchedule","type":"uint48"}],"name":"DefaultAdminTransferScheduled","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"periodNumber","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"capacity","type":"uint256"}],"name":"PeriodUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"inputs":[],"name":"BOOST_RATE_LIMIT_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"CONFIG_CONTRACTS_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"CONFIG_RATE_LIMIT_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"acceptDefaultAdminTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newAdmin","type":"address"}],"name":"beginDefaultAdminTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"boostCapacity","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"bucketConfig","outputs":[{"internalType":"uint32","name":"period","type":"uint32"},{"internalType":"uint32","name":"offset","type":"uint32"},{"internalType":"uint256","name":"limit","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"cancelDefaultAdminTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint48","name":"newDelay","type":"uint48"}],"name":"changeDefaultAdminDelay","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes32","name":"loanId","type":"bytes32"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint16","name":"loanTypeId","type":"uint16"},{"internalType":"bytes32","name":"loanName","type":"bytes32"}],"name":"createLoanAndDeposit","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"currentCapacity","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"currentPeriodNumber","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"defaultAdmin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"defaultAdminDelay","outputs":[{"internalType":"uint48","name":"","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"defaultAdminDelayIncreaseWait","outputs":[{"internalType":"uint48","name":"","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes32","name":"loanId","type":"bytes32"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"getAddressOracle","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getBridgeRouter","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getHubChainId","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getHubContractAddress","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"hubTokenPoolAddress","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minBucketLimit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingDefaultAdmin","outputs":[{"internalType":"address","name":"newAdmin","type":"address"},{"internalType":"uint48","name":"schedule","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingDefaultAdminDelay","outputs":[{"internalType":"uint48","name":"newDelay","type":"uint48"},{"internalType":"uint48","name":"schedule","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolId","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"messageId","type":"bytes32"},{"internalType":"uint16","name":"sourceChainId","type":"uint16"},{"internalType":"bytes32","name":"sourceAddress","type":"bytes32"},{"internalType":"bytes32","name":"handler","type":"bytes32"},{"internalType":"bytes","name":"payload","type":"bytes"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageReceived","name":"message","type":"tuple"}],"name":"receiveMessage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes32","name":"loanId","type":"bytes32"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"maxOverRepayment","type":"uint256"}],"name":"repay","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"messageId","type":"bytes32"},{"internalType":"uint16","name":"sourceChainId","type":"uint16"},{"internalType":"bytes32","name":"sourceAddress","type":"bytes32"},{"internalType":"bytes32","name":"handler","type":"bytes32"},{"internalType":"bytes","name":"payload","type":"bytes"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageReceived","name":"message","type":"tuple"},{"internalType":"bytes","name":"extraArgs","type":"bytes"}],"name":"reverseMessage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rollbackDefaultAdminDelay","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IAddressOracle","name":"newAddressOracle","type":"address"}],"name":"setAddressOracle","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint32","name":"period","type":"uint32"},{"internalType":"uint32","name":"offset","type":"uint32"},{"internalType":"uint256","name":"limit","type":"uint256"}],"internalType":"struct RateLimited.BucketConfig","name":"newBucketConfig","type":"tuple"}],"name":"setBucketConfig","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint16","name":"chainId","type":"uint16"},{"internalType":"bytes32","name":"contractAddress","type":"bytes32"}],"name":"setHub","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"token","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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

Deployed Bytecode

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

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

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

-----Decoded View---------------
Arg [0] : admin (address): 0x16870a6A85cD152229B97d018194d66740f932d6
Arg [1] : bridgeRouter (address): 0xBeF7aB7C5e6CeFF384cde460dd20C862047CDFa5
Arg [2] : hubChainId (uint16): 1
Arg [3] : hubContractAddress (bytes32): 0x000000000000000000000000ae4c62510f4d930a5c8796dbfb8c4bc7b9b62140
Arg [4] : addressOracle (address): 0x2b760759e4f8D994BeB2B9aFBA8De37eCf13F9B3
Arg [5] : bucketConfig (tuple): System.Collections.Generic.List`1[Nethereum.ABI.FunctionEncoding.ParameterOutput]
Arg [6] : poolId (uint8): 128
Arg [7] : token_ (address): 0x1c7D4B196Cb0C7B01d743Fbc6116a902379C7238
Arg [8] : hubTokenPoolAddress_ (bytes32): 0x0000000000000000000000001968237f3a7d256d08bcab212d7ae28feda72c34
Arg [9] : minBucketLimit_ (uint256): 10000000000

-----Encoded View---------------
12 Constructor Arguments found :
Arg [0] : 00000000000000000000000016870a6a85cd152229b97d018194d66740f932d6
Arg [1] : 000000000000000000000000bef7ab7c5e6ceff384cde460dd20c862047cdfa5
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000001
Arg [3] : 000000000000000000000000ae4c62510f4d930a5c8796dbfb8c4bc7b9b62140
Arg [4] : 0000000000000000000000002b760759e4f8d994beb2b9afba8de37ecf13f9b3
Arg [5] : 0000000000000000000000000000000000000000000000000000000000015180
Arg [6] : 0000000000000000000000000000000000000000000000000000000000000000
Arg [7] : 00000000000000000000000000000000000000000000000000000002540be400
Arg [8] : 0000000000000000000000000000000000000000000000000000000000000080
Arg [9] : 0000000000000000000000001c7d4b196cb0c7b01d743fbc6116a902379c7238
Arg [10] : 0000000000000000000000001968237f3a7d256d08bcab212d7ae28feda72c34
Arg [11] : 00000000000000000000000000000000000000000000000000000002540be400


Block Transaction Difficulty Gas Used Reward
View All Blocks Produced

Block Uncle Number Difficulty Gas Used Reward
View All Uncles
Loading...
Loading

Validator Index Block Amount
View All Withdrawals

Transaction Hash Block Value Eth2 PubKey Valid
View All Deposits
[ Download: CSV Export  ]
[ Download: CSV Export  ]

A contract address hosts a smart contract, which is a set of code stored on the blockchain that runs when predetermined conditions are met. Learn more about addresses in our Knowledge Base.