Source Code
Overview
ETH Balance
0 ETH
Token Holdings
More Info
ContractCreator
Multichain Info
N/A
Latest 25 from a total of 8,962 transactions
Transaction Hash |
Method
|
Block
|
From
|
To
|
|||||
---|---|---|---|---|---|---|---|---|---|
Withdraw ETH | 7054501 | 3 hrs ago | IN | 0 ETH | 0.00174423 | ||||
Deposit ETH | 7053401 | 8 hrs ago | IN | 0.5 ETH | 0.00095012 | ||||
Withdraw ETH | 7052158 | 12 hrs ago | IN | 0 ETH | 0.00066773 | ||||
Deposit ETH | 7047282 | 30 hrs ago | IN | 0.0565 ETH | 0.00062348 | ||||
Deposit ETH | 7044772 | 40 hrs ago | IN | 0.02 ETH | 0.00082842 | ||||
Deposit ETH | 7044518 | 41 hrs ago | IN | 0.005 ETH | 0.00069419 | ||||
Deposit ETH | 7044481 | 41 hrs ago | IN | 0.005 ETH | 0.0007872 | ||||
Deposit ETH | 7043982 | 43 hrs ago | IN | 0.05 ETH | 0.00107499 | ||||
Deposit ETH | 7043642 | 44 hrs ago | IN | 0.005 ETH | 0.00116436 | ||||
Withdraw ETH | 7043140 | 46 hrs ago | IN | 0 ETH | 0.00112048 | ||||
Deposit ETH | 7043111 | 46 hrs ago | IN | 0.08 ETH | 0.00109357 | ||||
Withdraw ETH | 7043105 | 46 hrs ago | IN | 0 ETH | 0.00150205 | ||||
Deposit ETH | 7043073 | 46 hrs ago | IN | 0.2 ETH | 0.00081291 | ||||
Deposit ETH | 7041236 | 2 days ago | IN | 0.01 ETH | 0.00055702 | ||||
Deposit ETH | 7039854 | 2 days ago | IN | 0.05 ETH | 0.00056272 | ||||
Deposit ETH | 7039355 | 2 days ago | IN | 1.30018658 ETH | 0.00041384 | ||||
Withdraw ETH | 7038501 | 2 days ago | IN | 0 ETH | 0.00097647 | ||||
Deposit ETH | 7038485 | 2 days ago | IN | 1 ETH | 0.00109291 | ||||
Deposit ETH | 7038108 | 2 days ago | IN | 0.005 ETH | 0.00071757 | ||||
Deposit ETH | 7038036 | 2 days ago | IN | 0.005 ETH | 0.00112845 | ||||
Deposit ETH | 7037633 | 2 days ago | IN | 0.1 ETH | 0.00343376 | ||||
Deposit ETH | 7037585 | 2 days ago | IN | 0.1 ETH | 0.00155056 | ||||
Deposit ETH | 7037443 | 2 days ago | IN | 0.01 ETH | 0.00653882 | ||||
Deposit ETH | 7036049 | 3 days ago | IN | 0.04 ETH | 0.00055771 | ||||
Deposit ETH | 7035960 | 3 days ago | IN | 0.04 ETH | 0.00115058 |
Latest 25 internal transactions (View All)
Advanced mode:
Parent Transaction Hash | Block | From | To | |||
---|---|---|---|---|---|---|
7055260 | 1 hr ago | 0.0587349 ETH | ||||
7055260 | 1 hr ago | 0.0587349 ETH | ||||
7055224 | 1 hr ago | 0.0587349 ETH | ||||
7055224 | 1 hr ago | 0.0587349 ETH | ||||
7055175 | 1 hr ago | 0.16147527 ETH | ||||
7055175 | 1 hr ago | 0.16147527 ETH | ||||
7055156 | 1 hr ago | 0.00002 ETH | ||||
7055156 | 1 hr ago | 0.00002 ETH | ||||
7054501 | 3 hrs ago | 0.08 ETH | ||||
7054501 | 3 hrs ago | 0.08 ETH | ||||
7053401 | 8 hrs ago | 0.5 ETH | ||||
7052158 | 12 hrs ago | 0.087509 ETH | ||||
7052158 | 12 hrs ago | 0.087509 ETH | ||||
7050887 | 17 hrs ago | 0.025 ETH | ||||
7050887 | 17 hrs ago | 0.025 ETH | ||||
7047282 | 30 hrs ago | 0.0565 ETH | ||||
7044772 | 40 hrs ago | 0.02 ETH | ||||
7044518 | 41 hrs ago | 0.005 ETH | ||||
7044481 | 41 hrs ago | 0.005 ETH | ||||
7043982 | 43 hrs ago | 0.05 ETH | ||||
7043827 | 43 hrs ago | 0.0125 ETH | ||||
7043827 | 43 hrs ago | 0.0125 ETH | ||||
7043642 | 44 hrs ago | 0.005 ETH | ||||
7043140 | 46 hrs ago | 0.01 ETH | ||||
7043140 | 46 hrs ago | 0.01 ETH |
Loading...
Loading
Contract Name:
WrappedTokenGatewayV3
Compiler Version
v0.8.10+commit.fc410830
Contract Source Code (Solidity Standard Json-Input format)
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.10; import {Ownable} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/Ownable.sol'; import {IERC20} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/IERC20.sol'; import {GPv2SafeERC20} from '@aave/core-v3/contracts/dependencies/gnosis/contracts/GPv2SafeERC20.sol'; import {IWETH} from '@aave/core-v3/contracts/misc/interfaces/IWETH.sol'; import {IPool} from '@aave/core-v3/contracts/interfaces/IPool.sol'; import {IAToken} from '@aave/core-v3/contracts/interfaces/IAToken.sol'; import {ReserveConfiguration} from '@aave/core-v3/contracts/protocol/libraries/configuration/ReserveConfiguration.sol'; import {UserConfiguration} from '@aave/core-v3/contracts/protocol/libraries/configuration/UserConfiguration.sol'; import {DataTypes} from '@aave/core-v3/contracts/protocol/libraries/types/DataTypes.sol'; import {IWrappedTokenGatewayV3} from './interfaces/IWrappedTokenGatewayV3.sol'; import {DataTypesHelper} from '../libraries/DataTypesHelper.sol'; /** * @dev This contract is an upgrade of the WrappedTokenGatewayV3 contract, with immutable pool address. * This contract keeps the same interface of the deprecated WrappedTokenGatewayV3 contract. */ contract WrappedTokenGatewayV3 is IWrappedTokenGatewayV3, Ownable { using ReserveConfiguration for DataTypes.ReserveConfigurationMap; using UserConfiguration for DataTypes.UserConfigurationMap; using GPv2SafeERC20 for IERC20; IWETH internal immutable WETH; IPool internal immutable POOL; /** * @dev Sets the WETH address and the PoolAddressesProvider address. Infinite approves pool. * @param weth Address of the Wrapped Ether contract * @param owner Address of the owner of this contract **/ constructor( address weth, address owner, IPool pool ) { WETH = IWETH(weth); POOL = pool; transferOwnership(owner); IWETH(weth).approve(address(pool), type(uint256).max); } /** * @dev deposits WETH into the reserve, using native ETH. A corresponding amount of the overlying asset (aTokens) * is minted. * @param onBehalfOf address of the user who will receive the aTokens representing the deposit * @param referralCode integrators are assigned a referral code and can potentially receive rewards. **/ function depositETH( address, address onBehalfOf, uint16 referralCode ) external payable override { WETH.deposit{value: msg.value}(); POOL.deposit(address(WETH), msg.value, onBehalfOf, referralCode); } /** * @dev withdraws the WETH _reserves of msg.sender. * @param amount amount of aWETH to withdraw and receive native ETH * @param to address of the user who will receive native ETH */ function withdrawETH( address, uint256 amount, address to ) external override { IAToken aWETH = IAToken(POOL.getReserveData(address(WETH)).aTokenAddress); uint256 userBalance = aWETH.balanceOf(msg.sender); uint256 amountToWithdraw = amount; // if amount is equal to uint(-1), the user wants to redeem everything if (amount == type(uint256).max) { amountToWithdraw = userBalance; } aWETH.transferFrom(msg.sender, address(this), amountToWithdraw); POOL.withdraw(address(WETH), amountToWithdraw, address(this)); WETH.withdraw(amountToWithdraw); _safeTransferETH(to, amountToWithdraw); } /** * @dev repays a borrow on the WETH reserve, for the specified amount (or for the whole amount, if uint256(-1) is specified). * @param amount the amount to repay, or uint256(-1) if the user wants to repay everything * @param rateMode the rate mode to repay * @param onBehalfOf the address for which msg.sender is repaying */ function repayETH( address, uint256 amount, uint256 rateMode, address onBehalfOf ) external payable override { (uint256 stableDebt, uint256 variableDebt) = DataTypesHelper.getUserCurrentDebt( onBehalfOf, POOL.getReserveData(address(WETH)) ); uint256 paybackAmount = DataTypes.InterestRateMode(rateMode) == DataTypes.InterestRateMode.STABLE ? stableDebt : variableDebt; if (amount < paybackAmount) { paybackAmount = amount; } require(msg.value >= paybackAmount, 'msg.value is less than repayment amount'); WETH.deposit{value: paybackAmount}(); POOL.repay(address(WETH), msg.value, rateMode, onBehalfOf); // refund remaining dust eth if (msg.value > paybackAmount) _safeTransferETH(msg.sender, msg.value - paybackAmount); } /** * @dev borrow WETH, unwraps to ETH and send both the ETH and DebtTokens to msg.sender, via `approveDelegation` and onBehalf argument in `Pool.borrow`. * @param amount the amount of ETH to borrow * @param interestRateMode the interest rate mode * @param referralCode integrators are assigned a referral code and can potentially receive rewards */ function borrowETH( address, uint256 amount, uint256 interestRateMode, uint16 referralCode ) external override { POOL.borrow(address(WETH), amount, interestRateMode, referralCode, msg.sender); WETH.withdraw(amount); _safeTransferETH(msg.sender, amount); } /** * @dev withdraws the WETH _reserves of msg.sender. * @param amount amount of aWETH to withdraw and receive native ETH * @param to address of the user who will receive native ETH * @param deadline validity deadline of permit and so depositWithPermit signature * @param permitV V parameter of ERC712 permit sig * @param permitR R parameter of ERC712 permit sig * @param permitS S parameter of ERC712 permit sig */ function withdrawETHWithPermit( address, uint256 amount, address to, uint256 deadline, uint8 permitV, bytes32 permitR, bytes32 permitS ) external override { IAToken aWETH = IAToken(POOL.getReserveData(address(WETH)).aTokenAddress); uint256 userBalance = aWETH.balanceOf(msg.sender); uint256 amountToWithdraw = amount; // if amount is equal to type(uint256).max, the user wants to redeem everything if (amount == type(uint256).max) { amountToWithdraw = userBalance; } // permit `amount` rather than `amountToWithdraw` to make it easier for front-ends and integrators aWETH.permit(msg.sender, address(this), amount, deadline, permitV, permitR, permitS); aWETH.transferFrom(msg.sender, address(this), amountToWithdraw); POOL.withdraw(address(WETH), amountToWithdraw, address(this)); WETH.withdraw(amountToWithdraw); _safeTransferETH(to, amountToWithdraw); } /** * @dev transfer ETH to an address, revert if it fails. * @param to recipient of the transfer * @param value the amount to send */ function _safeTransferETH(address to, uint256 value) internal { (bool success, ) = to.call{value: value}(new bytes(0)); require(success, 'ETH_TRANSFER_FAILED'); } /** * @dev transfer ERC20 from the utility contract, for ERC20 recovery in case of stuck tokens due * direct transfers to the contract address. * @param token token to transfer * @param to recipient of the transfer * @param amount amount to send */ function emergencyTokenTransfer( address token, address to, uint256 amount ) external onlyOwner { IERC20(token).safeTransfer(to, amount); } /** * @dev transfer native Ether from the utility contract, for native Ether recovery in case of stuck Ether * due to selfdestructs or ether transfers to the pre-computed contract address before deployment. * @param to recipient of the transfer * @param amount amount to send */ function emergencyEtherTransfer(address to, uint256 amount) external onlyOwner { _safeTransferETH(to, amount); } /** * @dev Get WETH address used by WrappedTokenGatewayV3 */ function getWETHAddress() external view returns (address) { return address(WETH); } /** * @dev Only WETH contract is allowed to transfer ETH here. Prevent other addresses to send Ether to this contract. */ receive() external payable { require(msg.sender == address(WETH), 'Receive not allowed'); } /** * @dev Revert fallback calls */ fallback() external payable { revert('Fallback not allowed'); } }
// SPDX-License-Identifier: LGPL-3.0-or-later pragma solidity 0.8.10; import {IERC20} from '../../openzeppelin/contracts/IERC20.sol'; /// @title Gnosis Protocol v2 Safe ERC20 Transfer Library /// @author Gnosis Developers /// @dev Gas-efficient version of Openzeppelin's SafeERC20 contract. library GPv2SafeERC20 { /// @dev Wrapper around a call to the ERC20 function `transfer` that reverts /// also when the token returns `false`. function safeTransfer(IERC20 token, address to, uint256 value) internal { bytes4 selector_ = token.transfer.selector; // solhint-disable-next-line no-inline-assembly assembly { let freeMemoryPointer := mload(0x40) mstore(freeMemoryPointer, selector_) mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) mstore(add(freeMemoryPointer, 36), value) if iszero(call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)) { returndatacopy(0, 0, returndatasize()) revert(0, returndatasize()) } } require(getLastTransferResult(token), 'GPv2: failed transfer'); } /// @dev Wrapper around a call to the ERC20 function `transferFrom` that /// reverts also when the token returns `false`. function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal { bytes4 selector_ = token.transferFrom.selector; // solhint-disable-next-line no-inline-assembly assembly { let freeMemoryPointer := mload(0x40) mstore(freeMemoryPointer, selector_) mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff)) mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) mstore(add(freeMemoryPointer, 68), value) if iszero(call(gas(), token, 0, freeMemoryPointer, 100, 0, 0)) { returndatacopy(0, 0, returndatasize()) revert(0, returndatasize()) } } require(getLastTransferResult(token), 'GPv2: failed transferFrom'); } /// @dev Verifies that the last return was a successful `transfer*` call. /// This is done by checking that the return data is either empty, or /// is a valid ABI encoded boolean. function getLastTransferResult(IERC20 token) private view returns (bool success) { // NOTE: Inspecting previous return data requires assembly. Note that // we write the return data to memory 0 in the case where the return // data size is 32, this is OK since the first 64 bytes of memory are // reserved by Solidy as a scratch space that can be used within // assembly blocks. // <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html> // solhint-disable-next-line no-inline-assembly assembly { /// @dev Revert with an ABI encoded Solidity error with a message /// that fits into 32-bytes. /// /// An ABI encoded Solidity error has the following memory layout: /// /// ------------+---------------------------------- /// byte range | value /// ------------+---------------------------------- /// 0x00..0x04 | selector("Error(string)") /// 0x04..0x24 | string offset (always 0x20) /// 0x24..0x44 | string length /// 0x44..0x64 | string value, padded to 32-bytes function revertWithMessage(length, message) { mstore(0x00, '\x08\xc3\x79\xa0') mstore(0x04, 0x20) mstore(0x24, length) mstore(0x44, message) revert(0x00, 0x64) } switch returndatasize() // Non-standard ERC20 transfer without return. case 0 { // NOTE: When the return data size is 0, verify that there // is code at the address. This is done in order to maintain // compatibility with Solidity calling conventions. // <https://docs.soliditylang.org/en/v0.7.6/control-structures.html#external-function-calls> if iszero(extcodesize(token)) { revertWithMessage(20, 'GPv2: not a contract') } success := 1 } // Standard ERC20 transfer returning boolean success value. case 32 { returndatacopy(0, 0, returndatasize()) // NOTE: For ABI encoding v1, any non-zero value is accepted // as `true` for a boolean. In order to stay compatible with // OpenZeppelin's `SafeERC20` library which is known to work // with the existing ERC20 implementation we care about, // make sure we return success for any non-zero return value // from the `transfer*` call. success := iszero(iszero(mload(0))) } default { revertWithMessage(31, 'GPv2: malformed transfer result') } } } }
// SPDX-License-Identifier: MIT pragma solidity 0.8.10; /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address payable) { return payable(msg.sender); } function _msgData() internal view virtual returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } }
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address sender, address recipient, uint256 amount) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); }
// SPDX-License-Identifier: MIT pragma solidity 0.8.10; import './Context.sol'; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ contract Ownable is Context { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor() { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), 'Ownable: caller is not the owner'); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), 'Ownable: new owner is the zero address'); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } }
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.0; import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol'; import {IScaledBalanceToken} from './IScaledBalanceToken.sol'; import {IInitializableAToken} from './IInitializableAToken.sol'; /** * @title IAToken * @author Aave * @notice Defines the basic interface for an AToken. */ interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken { /** * @dev Emitted during the transfer action * @param from The user whose tokens are being transferred * @param to The recipient * @param value The scaled amount being transferred * @param index The next liquidity index of the reserve */ event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index); /** * @notice Mints `amount` aTokens to `user` * @param caller The address performing the mint * @param onBehalfOf The address of the user that will receive the minted aTokens * @param amount The amount of tokens getting minted * @param index The next liquidity index of the reserve * @return `true` if the the previous balance of the user was 0 */ function mint( address caller, address onBehalfOf, uint256 amount, uint256 index ) external returns (bool); /** * @notice Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying` * @dev In some instances, the mint event could be emitted from a burn transaction * if the amount to burn is less than the interest that the user accrued * @param from The address from which the aTokens will be burned * @param receiverOfUnderlying The address that will receive the underlying * @param amount The amount being burned * @param index The next liquidity index of the reserve */ function burn(address from, address receiverOfUnderlying, uint256 amount, uint256 index) external; /** * @notice Mints aTokens to the reserve treasury * @param amount The amount of tokens getting minted * @param index The next liquidity index of the reserve */ function mintToTreasury(uint256 amount, uint256 index) external; /** * @notice Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken * @param from The address getting liquidated, current owner of the aTokens * @param to The recipient * @param value The amount of tokens getting transferred */ function transferOnLiquidation(address from, address to, uint256 value) external; /** * @notice Transfers the underlying asset to `target`. * @dev Used by the Pool to transfer assets in borrow(), withdraw() and flashLoan() * @param target The recipient of the underlying * @param amount The amount getting transferred */ function transferUnderlyingTo(address target, uint256 amount) external; /** * @notice Handles the underlying received by the aToken after the transfer has been completed. * @dev The default implementation is empty as with standard ERC20 tokens, nothing needs to be done after the * transfer is concluded. However in the future there may be aTokens that allow for example to stake the underlying * to receive LM rewards. In that case, `handleRepayment()` would perform the staking of the underlying asset. * @param user The user executing the repayment * @param onBehalfOf The address of the user who will get his debt reduced/removed * @param amount The amount getting repaid */ function handleRepayment(address user, address onBehalfOf, uint256 amount) external; /** * @notice Allow passing a signed message to approve spending * @dev implements the permit function as for * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md * @param owner The owner of the funds * @param spender The spender * @param value The amount * @param deadline The deadline timestamp, type(uint256).max for max deadline * @param v Signature param * @param s Signature param * @param r Signature param */ function permit( address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s ) external; /** * @notice Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH) * @return The address of the underlying asset */ function UNDERLYING_ASSET_ADDRESS() external view returns (address); /** * @notice Returns the address of the Aave treasury, receiving the fees on this aToken. * @return Address of the Aave treasury */ function RESERVE_TREASURY_ADDRESS() external view returns (address); /** * @notice Get the domain separator for the token * @dev Return cached value if chainId matches cache, otherwise recomputes separator * @return The domain separator of the token at current chain */ function DOMAIN_SEPARATOR() external view returns (bytes32); /** * @notice Returns the nonce for owner. * @param owner The address of the owner * @return The nonce of the owner */ function nonces(address owner) external view returns (uint256); /** * @notice Rescue and transfer tokens locked in this contract * @param token The address of the token * @param to The address of the recipient * @param amount The amount of token to transfer */ function rescueTokens(address token, address to, uint256 amount) external; }
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.0; /** * @title IAaveIncentivesController * @author Aave * @notice Defines the basic interface for an Aave Incentives Controller. * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers. */ interface IAaveIncentivesController { /** * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution. * @dev The units of `totalSupply` and `userBalance` should be the same. * @param user The address of the user whose asset balance has changed * @param totalSupply The total supply of the asset prior to user balance change * @param userBalance The previous user balance prior to balance change */ function handleAction(address user, uint256 totalSupply, uint256 userBalance) external; }
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.0; import {IAaveIncentivesController} from './IAaveIncentivesController.sol'; import {IPool} from './IPool.sol'; /** * @title IInitializableAToken * @author Aave * @notice Interface for the initialize function on AToken */ interface IInitializableAToken { /** * @dev Emitted when an aToken is initialized * @param underlyingAsset The address of the underlying asset * @param pool The address of the associated pool * @param treasury The address of the treasury * @param incentivesController The address of the incentives controller for this aToken * @param aTokenDecimals The decimals of the underlying * @param aTokenName The name of the aToken * @param aTokenSymbol The symbol of the aToken * @param params A set of encoded parameters for additional initialization */ event Initialized( address indexed underlyingAsset, address indexed pool, address treasury, address incentivesController, uint8 aTokenDecimals, string aTokenName, string aTokenSymbol, bytes params ); /** * @notice Initializes the aToken * @param pool The pool contract that is initializing this contract * @param treasury The address of the Aave treasury, receiving the fees on this aToken * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH) * @param incentivesController The smart contract managing potential incentives distribution * @param aTokenDecimals The decimals of the aToken, same as the underlying asset's * @param aTokenName The name of the aToken * @param aTokenSymbol The symbol of the aToken * @param params A set of encoded parameters for additional initialization */ function initialize( IPool pool, address treasury, address underlyingAsset, IAaveIncentivesController incentivesController, uint8 aTokenDecimals, string calldata aTokenName, string calldata aTokenSymbol, bytes calldata params ) external; }
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.0; import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol'; import {DataTypes} from '../protocol/libraries/types/DataTypes.sol'; /** * @title IPool * @author Aave * @notice Defines the basic interface for an Aave Pool. */ interface IPool { /** * @dev Emitted on mintUnbacked() * @param reserve The address of the underlying asset of the reserve * @param user The address initiating the supply * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens * @param amount The amount of supplied assets * @param referralCode The referral code used */ event MintUnbacked( address indexed reserve, address user, address indexed onBehalfOf, uint256 amount, uint16 indexed referralCode ); /** * @dev Emitted on backUnbacked() * @param reserve The address of the underlying asset of the reserve * @param backer The address paying for the backing * @param amount The amount added as backing * @param fee The amount paid in fees */ event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee); /** * @dev Emitted on supply() * @param reserve The address of the underlying asset of the reserve * @param user The address initiating the supply * @param onBehalfOf The beneficiary of the supply, receiving the aTokens * @param amount The amount supplied * @param referralCode The referral code used */ event Supply( address indexed reserve, address user, address indexed onBehalfOf, uint256 amount, uint16 indexed referralCode ); /** * @dev Emitted on withdraw() * @param reserve The address of the underlying asset being withdrawn * @param user The address initiating the withdrawal, owner of aTokens * @param to The address that will receive the underlying * @param amount The amount to be withdrawn */ event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount); /** * @dev Emitted on borrow() and flashLoan() when debt needs to be opened * @param reserve The address of the underlying asset being borrowed * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just * initiator of the transaction on flashLoan() * @param onBehalfOf The address that will be getting the debt * @param amount The amount borrowed out * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray * @param referralCode The referral code used */ event Borrow( address indexed reserve, address user, address indexed onBehalfOf, uint256 amount, DataTypes.InterestRateMode interestRateMode, uint256 borrowRate, uint16 indexed referralCode ); /** * @dev Emitted on repay() * @param reserve The address of the underlying asset of the reserve * @param user The beneficiary of the repayment, getting his debt reduced * @param repayer The address of the user initiating the repay(), providing the funds * @param amount The amount repaid * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly */ event Repay( address indexed reserve, address indexed user, address indexed repayer, uint256 amount, bool useATokens ); /** * @dev Emitted on swapBorrowRateMode() * @param reserve The address of the underlying asset of the reserve * @param user The address of the user swapping his rate mode * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable */ event SwapBorrowRateMode( address indexed reserve, address indexed user, DataTypes.InterestRateMode interestRateMode ); /** * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets * @param asset The address of the underlying asset of the reserve * @param totalDebt The total isolation mode debt for the reserve */ event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt); /** * @dev Emitted when the user selects a certain asset category for eMode * @param user The address of the user * @param categoryId The category id */ event UserEModeSet(address indexed user, uint8 categoryId); /** * @dev Emitted on setUserUseReserveAsCollateral() * @param reserve The address of the underlying asset of the reserve * @param user The address of the user enabling the usage as collateral */ event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user); /** * @dev Emitted on setUserUseReserveAsCollateral() * @param reserve The address of the underlying asset of the reserve * @param user The address of the user enabling the usage as collateral */ event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user); /** * @dev Emitted on rebalanceStableBorrowRate() * @param reserve The address of the underlying asset of the reserve * @param user The address of the user for which the rebalance has been executed */ event RebalanceStableBorrowRate(address indexed reserve, address indexed user); /** * @dev Emitted on flashLoan() * @param target The address of the flash loan receiver contract * @param initiator The address initiating the flash loan * @param asset The address of the asset being flash borrowed * @param amount The amount flash borrowed * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt * @param premium The fee flash borrowed * @param referralCode The referral code used */ event FlashLoan( address indexed target, address initiator, address indexed asset, uint256 amount, DataTypes.InterestRateMode interestRateMode, uint256 premium, uint16 indexed referralCode ); /** * @dev Emitted when a borrower is liquidated. * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation * @param user The address of the borrower getting liquidated * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover * @param liquidatedCollateralAmount The amount of collateral received by the liquidator * @param liquidator The address of the liquidator * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants * to receive the underlying collateral asset directly */ event LiquidationCall( address indexed collateralAsset, address indexed debtAsset, address indexed user, uint256 debtToCover, uint256 liquidatedCollateralAmount, address liquidator, bool receiveAToken ); /** * @dev Emitted when the state of a reserve is updated. * @param reserve The address of the underlying asset of the reserve * @param liquidityRate The next liquidity rate * @param stableBorrowRate The next stable borrow rate * @param variableBorrowRate The next variable borrow rate * @param liquidityIndex The next liquidity index * @param variableBorrowIndex The next variable borrow index */ event ReserveDataUpdated( address indexed reserve, uint256 liquidityRate, uint256 stableBorrowRate, uint256 variableBorrowRate, uint256 liquidityIndex, uint256 variableBorrowIndex ); /** * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest. * @param reserve The address of the reserve * @param amountMinted The amount minted to the treasury */ event MintedToTreasury(address indexed reserve, uint256 amountMinted); /** * @notice Mints an `amount` of aTokens to the `onBehalfOf` * @param asset The address of the underlying asset to mint * @param amount The amount to mint * @param onBehalfOf The address that will receive the aTokens * @param referralCode Code used to register the integrator originating the operation, for potential rewards. * 0 if the action is executed directly by the user, without any middle-man */ function mintUnbacked( address asset, uint256 amount, address onBehalfOf, uint16 referralCode ) external; /** * @notice Back the current unbacked underlying with `amount` and pay `fee`. * @param asset The address of the underlying asset to back * @param amount The amount to back * @param fee The amount paid in fees * @return The backed amount */ function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256); /** * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens. * - E.g. User supplies 100 USDC and gets in return 100 aUSDC * @param asset The address of the underlying asset to supply * @param amount The amount to be supplied * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user * wants to receive them on his own wallet, or a different address if the beneficiary of aTokens * is a different wallet * @param referralCode Code used to register the integrator originating the operation, for potential rewards. * 0 if the action is executed directly by the user, without any middle-man */ function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external; /** * @notice Supply with transfer approval of asset to be supplied done via permit function * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713 * @param asset The address of the underlying asset to supply * @param amount The amount to be supplied * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user * wants to receive them on his own wallet, or a different address if the beneficiary of aTokens * is a different wallet * @param deadline The deadline timestamp that the permit is valid * @param referralCode Code used to register the integrator originating the operation, for potential rewards. * 0 if the action is executed directly by the user, without any middle-man * @param permitV The V parameter of ERC712 permit sig * @param permitR The R parameter of ERC712 permit sig * @param permitS The S parameter of ERC712 permit sig */ function supplyWithPermit( address asset, uint256 amount, address onBehalfOf, uint16 referralCode, uint256 deadline, uint8 permitV, bytes32 permitR, bytes32 permitS ) external; /** * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC * @param asset The address of the underlying asset to withdraw * @param amount The underlying amount to be withdrawn * - Send the value type(uint256).max in order to withdraw the whole aToken balance * @param to The address that will receive the underlying, same as msg.sender if the user * wants to receive it on his own wallet, or a different address if the beneficiary is a * different wallet * @return The final amount withdrawn */ function withdraw(address asset, uint256 amount, address to) external returns (uint256); /** * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower * already supplied enough collateral, or he was given enough allowance by a credit delegator on the * corresponding debt token (StableDebtToken or VariableDebtToken) * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet * and 100 stable/variable debt tokens, depending on the `interestRateMode` * @param asset The address of the underlying asset to borrow * @param amount The amount to be borrowed * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable * @param referralCode The code used to register the integrator originating the operation, for potential rewards. * 0 if the action is executed directly by the user, without any middle-man * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator * if he has been given credit delegation allowance */ function borrow( address asset, uint256 amount, uint256 interestRateMode, uint16 referralCode, address onBehalfOf ) external; /** * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address * @param asset The address of the borrowed underlying asset previously borrowed * @param amount The amount to repay * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode` * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the * user calling the function if he wants to reduce/remove his own debt, or the address of any other * other borrower whose debt should be removed * @return The final amount repaid */ function repay( address asset, uint256 amount, uint256 interestRateMode, address onBehalfOf ) external returns (uint256); /** * @notice Repay with transfer approval of asset to be repaid done via permit function * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713 * @param asset The address of the borrowed underlying asset previously borrowed * @param amount The amount to repay * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode` * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the * user calling the function if he wants to reduce/remove his own debt, or the address of any other * other borrower whose debt should be removed * @param deadline The deadline timestamp that the permit is valid * @param permitV The V parameter of ERC712 permit sig * @param permitR The R parameter of ERC712 permit sig * @param permitS The S parameter of ERC712 permit sig * @return The final amount repaid */ function repayWithPermit( address asset, uint256 amount, uint256 interestRateMode, address onBehalfOf, uint256 deadline, uint8 permitV, bytes32 permitR, bytes32 permitS ) external returns (uint256); /** * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the * equivalent debt tokens * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens * @dev Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken * balance is not enough to cover the whole debt * @param asset The address of the borrowed underlying asset previously borrowed * @param amount The amount to repay * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode` * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable * @return The final amount repaid */ function repayWithATokens( address asset, uint256 amount, uint256 interestRateMode ) external returns (uint256); /** * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa * @param asset The address of the underlying asset borrowed * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable */ function swapBorrowRateMode(address asset, uint256 interestRateMode) external; /** * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve. * - Users can be rebalanced if the following conditions are satisfied: * 1. Usage ratio is above 95% * 2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too * much has been borrowed at a stable rate and suppliers are not earning enough * @param asset The address of the underlying asset borrowed * @param user The address of the user to be rebalanced */ function rebalanceStableBorrowRate(address asset, address user) external; /** * @notice Allows suppliers to enable/disable a specific supplied asset as collateral * @param asset The address of the underlying asset supplied * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise */ function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external; /** * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1 * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives * a proportionally amount of the `collateralAsset` plus a bonus to cover market risk * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation * @param user The address of the borrower getting liquidated * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants * to receive the underlying collateral asset directly */ function liquidationCall( address collateralAsset, address debtAsset, address user, uint256 debtToCover, bool receiveAToken ) external; /** * @notice Allows smartcontracts to access the liquidity of the pool within one transaction, * as long as the amount taken plus a fee is returned. * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept * into consideration. For further details please visit https://docs.aave.com/developers/ * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface * @param assets The addresses of the assets being flash-borrowed * @param amounts The amounts of the assets being flash-borrowed * @param interestRateModes Types of the debt to open if the flash loan is not returned: * 0 -> Don't open any debt, just revert if funds can't be transferred from the receiver * 1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address * 2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address * @param onBehalfOf The address that will receive the debt in the case of using on `modes` 1 or 2 * @param params Variadic packed params to pass to the receiver as extra information * @param referralCode The code used to register the integrator originating the operation, for potential rewards. * 0 if the action is executed directly by the user, without any middle-man */ function flashLoan( address receiverAddress, address[] calldata assets, uint256[] calldata amounts, uint256[] calldata interestRateModes, address onBehalfOf, bytes calldata params, uint16 referralCode ) external; /** * @notice Allows smartcontracts to access the liquidity of the pool within one transaction, * as long as the amount taken plus a fee is returned. * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept * into consideration. For further details please visit https://docs.aave.com/developers/ * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface * @param asset The address of the asset being flash-borrowed * @param amount The amount of the asset being flash-borrowed * @param params Variadic packed params to pass to the receiver as extra information * @param referralCode The code used to register the integrator originating the operation, for potential rewards. * 0 if the action is executed directly by the user, without any middle-man */ function flashLoanSimple( address receiverAddress, address asset, uint256 amount, bytes calldata params, uint16 referralCode ) external; /** * @notice Returns the user account data across all the reserves * @param user The address of the user * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed * @return totalDebtBase The total debt of the user in the base currency used by the price feed * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed * @return currentLiquidationThreshold The liquidation threshold of the user * @return ltv The loan to value of The user * @return healthFactor The current health factor of the user */ function getUserAccountData( address user ) external view returns ( uint256 totalCollateralBase, uint256 totalDebtBase, uint256 availableBorrowsBase, uint256 currentLiquidationThreshold, uint256 ltv, uint256 healthFactor ); /** * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an * interest rate strategy * @dev Only callable by the PoolConfigurator contract * @param asset The address of the underlying asset of the reserve * @param aTokenAddress The address of the aToken that will be assigned to the reserve * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve * @param interestRateStrategyAddress The address of the interest rate strategy contract */ function initReserve( address asset, address aTokenAddress, address stableDebtAddress, address variableDebtAddress, address interestRateStrategyAddress ) external; /** * @notice Drop a reserve * @dev Only callable by the PoolConfigurator contract * @param asset The address of the underlying asset of the reserve */ function dropReserve(address asset) external; /** * @notice Updates the address of the interest rate strategy contract * @dev Only callable by the PoolConfigurator contract * @param asset The address of the underlying asset of the reserve * @param rateStrategyAddress The address of the interest rate strategy contract */ function setReserveInterestRateStrategyAddress( address asset, address rateStrategyAddress ) external; /** * @notice Sets the configuration bitmap of the reserve as a whole * @dev Only callable by the PoolConfigurator contract * @param asset The address of the underlying asset of the reserve * @param configuration The new configuration bitmap */ function setConfiguration( address asset, DataTypes.ReserveConfigurationMap calldata configuration ) external; /** * @notice Returns the configuration of the reserve * @param asset The address of the underlying asset of the reserve * @return The configuration of the reserve */ function getConfiguration( address asset ) external view returns (DataTypes.ReserveConfigurationMap memory); /** * @notice Returns the configuration of the user across all the reserves * @param user The user address * @return The configuration of the user */ function getUserConfiguration( address user ) external view returns (DataTypes.UserConfigurationMap memory); /** * @notice Returns the normalized income of the reserve * @param asset The address of the underlying asset of the reserve * @return The reserve's normalized income */ function getReserveNormalizedIncome(address asset) external view returns (uint256); /** * @notice Returns the normalized variable debt per unit of asset * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a * "dynamic" variable index based on time, current stored index and virtual rate at the current * moment (approx. a borrower would get if opening a position). This means that is always used in * combination with variable debt supply/balances. * If using this function externally, consider that is possible to have an increasing normalized * variable debt that is not equivalent to how the variable debt index would be updated in storage * (e.g. only updates with non-zero variable debt supply) * @param asset The address of the underlying asset of the reserve * @return The reserve normalized variable debt */ function getReserveNormalizedVariableDebt(address asset) external view returns (uint256); /** * @notice Returns the state and configuration of the reserve * @param asset The address of the underlying asset of the reserve * @return The state and configuration data of the reserve */ function getReserveData(address asset) external view returns (DataTypes.ReserveData memory); /** * @notice Validates and finalizes an aToken transfer * @dev Only callable by the overlying aToken of the `asset` * @param asset The address of the underlying asset of the aToken * @param from The user from which the aTokens are transferred * @param to The user receiving the aTokens * @param amount The amount being transferred/withdrawn * @param balanceFromBefore The aToken balance of the `from` user before the transfer * @param balanceToBefore The aToken balance of the `to` user before the transfer */ function finalizeTransfer( address asset, address from, address to, uint256 amount, uint256 balanceFromBefore, uint256 balanceToBefore ) external; /** * @notice Returns the list of the underlying assets of all the initialized reserves * @dev It does not include dropped reserves * @return The addresses of the underlying assets of the initialized reserves */ function getReservesList() external view returns (address[] memory); /** * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct * @param id The id of the reserve as stored in the DataTypes.ReserveData struct * @return The address of the reserve associated with id */ function getReserveAddressById(uint16 id) external view returns (address); /** * @notice Returns the PoolAddressesProvider connected to this contract * @return The address of the PoolAddressesProvider */ function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider); /** * @notice Updates the protocol fee on the bridging * @param bridgeProtocolFee The part of the premium sent to the protocol treasury */ function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external; /** * @notice Updates flash loan premiums. Flash loan premium consists of two parts: * - A part is sent to aToken holders as extra, one time accumulated interest * - A part is collected by the protocol treasury * @dev The total premium is calculated on the total borrowed amount * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal` * @dev Only callable by the PoolConfigurator contract * @param flashLoanPremiumTotal The total premium, expressed in bps * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps */ function updateFlashloanPremiums( uint128 flashLoanPremiumTotal, uint128 flashLoanPremiumToProtocol ) external; /** * @notice Configures a new category for the eMode. * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category. * The category 0 is reserved as it's the default for volatile assets * @param id The id of the category * @param config The configuration of the category */ function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external; /** * @notice Returns the data of an eMode category * @param id The id of the category * @return The configuration data of the category */ function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory); /** * @notice Allows a user to use the protocol in eMode * @param categoryId The id of the category */ function setUserEMode(uint8 categoryId) external; /** * @notice Returns the eMode the user is using * @param user The address of the user * @return The eMode id */ function getUserEMode(address user) external view returns (uint256); /** * @notice Resets the isolation mode total debt of the given asset to zero * @dev It requires the given asset has zero debt ceiling * @param asset The address of the underlying asset to reset the isolationModeTotalDebt */ function resetIsolationModeTotalDebt(address asset) external; /** * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate * @return The percentage of available liquidity to borrow, expressed in bps */ function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256); /** * @notice Returns the total fee on flash loans * @return The total fee on flashloans */ function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128); /** * @notice Returns the part of the bridge fees sent to protocol * @return The bridge fee sent to the protocol treasury */ function BRIDGE_PROTOCOL_FEE() external view returns (uint256); /** * @notice Returns the part of the flashloan fees sent to protocol * @return The flashloan fee sent to the protocol treasury */ function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128); /** * @notice Returns the maximum number of reserves supported to be listed in this Pool * @return The maximum number of reserves supported */ function MAX_NUMBER_RESERVES() external view returns (uint16); /** * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens * @param assets The list of reserves for which the minting needs to be executed */ function mintToTreasury(address[] calldata assets) external; /** * @notice Rescue and transfer tokens locked in this contract * @param token The address of the token * @param to The address of the recipient * @param amount The amount of token to transfer */ function rescueTokens(address token, address to, uint256 amount) external; /** * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens. * - E.g. User supplies 100 USDC and gets in return 100 aUSDC * @dev Deprecated: Use the `supply` function instead * @param asset The address of the underlying asset to supply * @param amount The amount to be supplied * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user * wants to receive them on his own wallet, or a different address if the beneficiary of aTokens * is a different wallet * @param referralCode Code used to register the integrator originating the operation, for potential rewards. * 0 if the action is executed directly by the user, without any middle-man */ function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external; }
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.0; /** * @title IPoolAddressesProvider * @author Aave * @notice Defines the basic interface for a Pool Addresses Provider. */ interface IPoolAddressesProvider { /** * @dev Emitted when the market identifier is updated. * @param oldMarketId The old id of the market * @param newMarketId The new id of the market */ event MarketIdSet(string indexed oldMarketId, string indexed newMarketId); /** * @dev Emitted when the pool is updated. * @param oldAddress The old address of the Pool * @param newAddress The new address of the Pool */ event PoolUpdated(address indexed oldAddress, address indexed newAddress); /** * @dev Emitted when the pool configurator is updated. * @param oldAddress The old address of the PoolConfigurator * @param newAddress The new address of the PoolConfigurator */ event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress); /** * @dev Emitted when the price oracle is updated. * @param oldAddress The old address of the PriceOracle * @param newAddress The new address of the PriceOracle */ event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress); /** * @dev Emitted when the ACL manager is updated. * @param oldAddress The old address of the ACLManager * @param newAddress The new address of the ACLManager */ event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress); /** * @dev Emitted when the ACL admin is updated. * @param oldAddress The old address of the ACLAdmin * @param newAddress The new address of the ACLAdmin */ event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress); /** * @dev Emitted when the price oracle sentinel is updated. * @param oldAddress The old address of the PriceOracleSentinel * @param newAddress The new address of the PriceOracleSentinel */ event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress); /** * @dev Emitted when the pool data provider is updated. * @param oldAddress The old address of the PoolDataProvider * @param newAddress The new address of the PoolDataProvider */ event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress); /** * @dev Emitted when a new proxy is created. * @param id The identifier of the proxy * @param proxyAddress The address of the created proxy contract * @param implementationAddress The address of the implementation contract */ event ProxyCreated( bytes32 indexed id, address indexed proxyAddress, address indexed implementationAddress ); /** * @dev Emitted when a new non-proxied contract address is registered. * @param id The identifier of the contract * @param oldAddress The address of the old contract * @param newAddress The address of the new contract */ event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress); /** * @dev Emitted when the implementation of the proxy registered with id is updated * @param id The identifier of the contract * @param proxyAddress The address of the proxy contract * @param oldImplementationAddress The address of the old implementation contract * @param newImplementationAddress The address of the new implementation contract */ event AddressSetAsProxy( bytes32 indexed id, address indexed proxyAddress, address oldImplementationAddress, address indexed newImplementationAddress ); /** * @notice Returns the id of the Aave market to which this contract points to. * @return The market id */ function getMarketId() external view returns (string memory); /** * @notice Associates an id with a specific PoolAddressesProvider. * @dev This can be used to create an onchain registry of PoolAddressesProviders to * identify and validate multiple Aave markets. * @param newMarketId The market id */ function setMarketId(string calldata newMarketId) external; /** * @notice Returns an address by its identifier. * @dev The returned address might be an EOA or a contract, potentially proxied * @dev It returns ZERO if there is no registered address with the given id * @param id The id * @return The address of the registered for the specified id */ function getAddress(bytes32 id) external view returns (address); /** * @notice General function to update the implementation of a proxy registered with * certain `id`. If there is no proxy registered, it will instantiate one and * set as implementation the `newImplementationAddress`. * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit * setter function, in order to avoid unexpected consequences * @param id The id * @param newImplementationAddress The address of the new implementation */ function setAddressAsProxy(bytes32 id, address newImplementationAddress) external; /** * @notice Sets an address for an id replacing the address saved in the addresses map. * @dev IMPORTANT Use this function carefully, as it will do a hard replacement * @param id The id * @param newAddress The address to set */ function setAddress(bytes32 id, address newAddress) external; /** * @notice Returns the address of the Pool proxy. * @return The Pool proxy address */ function getPool() external view returns (address); /** * @notice Updates the implementation of the Pool, or creates a proxy * setting the new `pool` implementation when the function is called for the first time. * @param newPoolImpl The new Pool implementation */ function setPoolImpl(address newPoolImpl) external; /** * @notice Returns the address of the PoolConfigurator proxy. * @return The PoolConfigurator proxy address */ function getPoolConfigurator() external view returns (address); /** * @notice Updates the implementation of the PoolConfigurator, or creates a proxy * setting the new `PoolConfigurator` implementation when the function is called for the first time. * @param newPoolConfiguratorImpl The new PoolConfigurator implementation */ function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external; /** * @notice Returns the address of the price oracle. * @return The address of the PriceOracle */ function getPriceOracle() external view returns (address); /** * @notice Updates the address of the price oracle. * @param newPriceOracle The address of the new PriceOracle */ function setPriceOracle(address newPriceOracle) external; /** * @notice Returns the address of the ACL manager. * @return The address of the ACLManager */ function getACLManager() external view returns (address); /** * @notice Updates the address of the ACL manager. * @param newAclManager The address of the new ACLManager */ function setACLManager(address newAclManager) external; /** * @notice Returns the address of the ACL admin. * @return The address of the ACL admin */ function getACLAdmin() external view returns (address); /** * @notice Updates the address of the ACL admin. * @param newAclAdmin The address of the new ACL admin */ function setACLAdmin(address newAclAdmin) external; /** * @notice Returns the address of the price oracle sentinel. * @return The address of the PriceOracleSentinel */ function getPriceOracleSentinel() external view returns (address); /** * @notice Updates the address of the price oracle sentinel. * @param newPriceOracleSentinel The address of the new PriceOracleSentinel */ function setPriceOracleSentinel(address newPriceOracleSentinel) external; /** * @notice Returns the address of the data provider. * @return The address of the DataProvider */ function getPoolDataProvider() external view returns (address); /** * @notice Updates the address of the data provider. * @param newDataProvider The address of the new DataProvider */ function setPoolDataProvider(address newDataProvider) external; }
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.0; /** * @title IScaledBalanceToken * @author Aave * @notice Defines the basic interface for a scaled-balance token. */ interface IScaledBalanceToken { /** * @dev Emitted after the mint action * @param caller The address performing the mint * @param onBehalfOf The address of the user that will receive the minted tokens * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest) * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf' * @param index The next liquidity index of the reserve */ event Mint( address indexed caller, address indexed onBehalfOf, uint256 value, uint256 balanceIncrease, uint256 index ); /** * @dev Emitted after the burn action * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address * @param from The address from which the tokens will be burned * @param target The address that will receive the underlying, if any * @param value The scaled-up amount being burned (user entered amount - balance increase from interest) * @param balanceIncrease The increase in scaled-up balance since the last action of 'from' * @param index The next liquidity index of the reserve */ event Burn( address indexed from, address indexed target, uint256 value, uint256 balanceIncrease, uint256 index ); /** * @notice Returns the scaled balance of the user. * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index * at the moment of the update * @param user The user whose balance is calculated * @return The scaled balance of the user */ function scaledBalanceOf(address user) external view returns (uint256); /** * @notice Returns the scaled balance of the user and the scaled total supply. * @param user The address of the user * @return The scaled balance of the user * @return The scaled total supply */ function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256); /** * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index) * @return The scaled total supply */ function scaledTotalSupply() external view returns (uint256); /** * @notice Returns last index interest was accrued to the user's balance * @param user The address of the user * @return The last index interest was accrued to the user's balance, expressed in ray */ function getPreviousIndex(address user) external view returns (uint256); }
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.0; interface IWETH { function deposit() external payable; function withdraw(uint256) external; function approve(address guy, uint256 wad) external returns (bool); function transferFrom(address src, address dst, uint256 wad) external returns (bool); }
// SPDX-License-Identifier: BUSL-1.1 pragma solidity ^0.8.0; import {Errors} from '../helpers/Errors.sol'; import {DataTypes} from '../types/DataTypes.sol'; /** * @title ReserveConfiguration library * @author Aave * @notice Implements the bitmap logic to handle the reserve configuration */ library ReserveConfiguration { uint256 internal constant LTV_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000; // prettier-ignore uint256 internal constant LIQUIDATION_THRESHOLD_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFF; // prettier-ignore uint256 internal constant LIQUIDATION_BONUS_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF; // prettier-ignore uint256 internal constant DECIMALS_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFF; // prettier-ignore uint256 internal constant ACTIVE_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant FROZEN_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant BORROWING_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant STABLE_BORROWING_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant PAUSED_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant BORROWABLE_IN_ISOLATION_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant SILOED_BORROWING_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant FLASHLOAN_ENABLED_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant RESERVE_FACTOR_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant BORROW_CAP_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant SUPPLY_CAP_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant LIQUIDATION_PROTOCOL_FEE_MASK = 0xFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant EMODE_CATEGORY_MASK = 0xFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant UNBACKED_MINT_CAP_MASK = 0xFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore uint256 internal constant DEBT_CEILING_MASK = 0xF0000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore /// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed uint256 internal constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16; uint256 internal constant LIQUIDATION_BONUS_START_BIT_POSITION = 32; uint256 internal constant RESERVE_DECIMALS_START_BIT_POSITION = 48; uint256 internal constant IS_ACTIVE_START_BIT_POSITION = 56; uint256 internal constant IS_FROZEN_START_BIT_POSITION = 57; uint256 internal constant BORROWING_ENABLED_START_BIT_POSITION = 58; uint256 internal constant STABLE_BORROWING_ENABLED_START_BIT_POSITION = 59; uint256 internal constant IS_PAUSED_START_BIT_POSITION = 60; uint256 internal constant BORROWABLE_IN_ISOLATION_START_BIT_POSITION = 61; uint256 internal constant SILOED_BORROWING_START_BIT_POSITION = 62; uint256 internal constant FLASHLOAN_ENABLED_START_BIT_POSITION = 63; uint256 internal constant RESERVE_FACTOR_START_BIT_POSITION = 64; uint256 internal constant BORROW_CAP_START_BIT_POSITION = 80; uint256 internal constant SUPPLY_CAP_START_BIT_POSITION = 116; uint256 internal constant LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION = 152; uint256 internal constant EMODE_CATEGORY_START_BIT_POSITION = 168; uint256 internal constant UNBACKED_MINT_CAP_START_BIT_POSITION = 176; uint256 internal constant DEBT_CEILING_START_BIT_POSITION = 212; uint256 internal constant MAX_VALID_LTV = 65535; uint256 internal constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535; uint256 internal constant MAX_VALID_LIQUIDATION_BONUS = 65535; uint256 internal constant MAX_VALID_DECIMALS = 255; uint256 internal constant MAX_VALID_RESERVE_FACTOR = 65535; uint256 internal constant MAX_VALID_BORROW_CAP = 68719476735; uint256 internal constant MAX_VALID_SUPPLY_CAP = 68719476735; uint256 internal constant MAX_VALID_LIQUIDATION_PROTOCOL_FEE = 65535; uint256 internal constant MAX_VALID_EMODE_CATEGORY = 255; uint256 internal constant MAX_VALID_UNBACKED_MINT_CAP = 68719476735; uint256 internal constant MAX_VALID_DEBT_CEILING = 1099511627775; uint256 public constant DEBT_CEILING_DECIMALS = 2; uint16 public constant MAX_RESERVES_COUNT = 128; /** * @notice Sets the Loan to Value of the reserve * @param self The reserve configuration * @param ltv The new ltv */ function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure { require(ltv <= MAX_VALID_LTV, Errors.INVALID_LTV); self.data = (self.data & LTV_MASK) | ltv; } /** * @notice Gets the Loan to Value of the reserve * @param self The reserve configuration * @return The loan to value */ function getLtv(DataTypes.ReserveConfigurationMap memory self) internal pure returns (uint256) { return self.data & ~LTV_MASK; } /** * @notice Sets the liquidation threshold of the reserve * @param self The reserve configuration * @param threshold The new liquidation threshold */ function setLiquidationThreshold( DataTypes.ReserveConfigurationMap memory self, uint256 threshold ) internal pure { require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.INVALID_LIQ_THRESHOLD); self.data = (self.data & LIQUIDATION_THRESHOLD_MASK) | (threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION); } /** * @notice Gets the liquidation threshold of the reserve * @param self The reserve configuration * @return The liquidation threshold */ function getLiquidationThreshold( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256) { return (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION; } /** * @notice Sets the liquidation bonus of the reserve * @param self The reserve configuration * @param bonus The new liquidation bonus */ function setLiquidationBonus( DataTypes.ReserveConfigurationMap memory self, uint256 bonus ) internal pure { require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.INVALID_LIQ_BONUS); self.data = (self.data & LIQUIDATION_BONUS_MASK) | (bonus << LIQUIDATION_BONUS_START_BIT_POSITION); } /** * @notice Gets the liquidation bonus of the reserve * @param self The reserve configuration * @return The liquidation bonus */ function getLiquidationBonus( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256) { return (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION; } /** * @notice Sets the decimals of the underlying asset of the reserve * @param self The reserve configuration * @param decimals The decimals */ function setDecimals( DataTypes.ReserveConfigurationMap memory self, uint256 decimals ) internal pure { require(decimals <= MAX_VALID_DECIMALS, Errors.INVALID_DECIMALS); self.data = (self.data & DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION); } /** * @notice Gets the decimals of the underlying asset of the reserve * @param self The reserve configuration * @return The decimals of the asset */ function getDecimals( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256) { return (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION; } /** * @notice Sets the active state of the reserve * @param self The reserve configuration * @param active The active state */ function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure { self.data = (self.data & ACTIVE_MASK) | (uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION); } /** * @notice Gets the active state of the reserve * @param self The reserve configuration * @return The active state */ function getActive(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) { return (self.data & ~ACTIVE_MASK) != 0; } /** * @notice Sets the frozen state of the reserve * @param self The reserve configuration * @param frozen The frozen state */ function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure { self.data = (self.data & FROZEN_MASK) | (uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION); } /** * @notice Gets the frozen state of the reserve * @param self The reserve configuration * @return The frozen state */ function getFrozen(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) { return (self.data & ~FROZEN_MASK) != 0; } /** * @notice Sets the paused state of the reserve * @param self The reserve configuration * @param paused The paused state */ function setPaused(DataTypes.ReserveConfigurationMap memory self, bool paused) internal pure { self.data = (self.data & PAUSED_MASK) | (uint256(paused ? 1 : 0) << IS_PAUSED_START_BIT_POSITION); } /** * @notice Gets the paused state of the reserve * @param self The reserve configuration * @return The paused state */ function getPaused(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) { return (self.data & ~PAUSED_MASK) != 0; } /** * @notice Sets the borrowable in isolation flag for the reserve. * @dev When this flag is set to true, the asset will be borrowable against isolated collaterals and the borrowed * amount will be accumulated in the isolated collateral's total debt exposure. * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep * consistency in the debt ceiling calculations. * @param self The reserve configuration * @param borrowable True if the asset is borrowable */ function setBorrowableInIsolation( DataTypes.ReserveConfigurationMap memory self, bool borrowable ) internal pure { self.data = (self.data & BORROWABLE_IN_ISOLATION_MASK) | (uint256(borrowable ? 1 : 0) << BORROWABLE_IN_ISOLATION_START_BIT_POSITION); } /** * @notice Gets the borrowable in isolation flag for the reserve. * @dev If the returned flag is true, the asset is borrowable against isolated collateral. Assets borrowed with * isolated collateral is accounted for in the isolated collateral's total debt exposure. * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep * consistency in the debt ceiling calculations. * @param self The reserve configuration * @return The borrowable in isolation flag */ function getBorrowableInIsolation( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (bool) { return (self.data & ~BORROWABLE_IN_ISOLATION_MASK) != 0; } /** * @notice Sets the siloed borrowing flag for the reserve. * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset. * @param self The reserve configuration * @param siloed True if the asset is siloed */ function setSiloedBorrowing( DataTypes.ReserveConfigurationMap memory self, bool siloed ) internal pure { self.data = (self.data & SILOED_BORROWING_MASK) | (uint256(siloed ? 1 : 0) << SILOED_BORROWING_START_BIT_POSITION); } /** * @notice Gets the siloed borrowing flag for the reserve. * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset. * @param self The reserve configuration * @return The siloed borrowing flag */ function getSiloedBorrowing( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (bool) { return (self.data & ~SILOED_BORROWING_MASK) != 0; } /** * @notice Enables or disables borrowing on the reserve * @param self The reserve configuration * @param enabled True if the borrowing needs to be enabled, false otherwise */ function setBorrowingEnabled( DataTypes.ReserveConfigurationMap memory self, bool enabled ) internal pure { self.data = (self.data & BORROWING_MASK) | (uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION); } /** * @notice Gets the borrowing state of the reserve * @param self The reserve configuration * @return The borrowing state */ function getBorrowingEnabled( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (bool) { return (self.data & ~BORROWING_MASK) != 0; } /** * @notice Enables or disables stable rate borrowing on the reserve * @param self The reserve configuration * @param enabled True if the stable rate borrowing needs to be enabled, false otherwise */ function setStableRateBorrowingEnabled( DataTypes.ReserveConfigurationMap memory self, bool enabled ) internal pure { self.data = (self.data & STABLE_BORROWING_MASK) | (uint256(enabled ? 1 : 0) << STABLE_BORROWING_ENABLED_START_BIT_POSITION); } /** * @notice Gets the stable rate borrowing state of the reserve * @param self The reserve configuration * @return The stable rate borrowing state */ function getStableRateBorrowingEnabled( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (bool) { return (self.data & ~STABLE_BORROWING_MASK) != 0; } /** * @notice Sets the reserve factor of the reserve * @param self The reserve configuration * @param reserveFactor The reserve factor */ function setReserveFactor( DataTypes.ReserveConfigurationMap memory self, uint256 reserveFactor ) internal pure { require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.INVALID_RESERVE_FACTOR); self.data = (self.data & RESERVE_FACTOR_MASK) | (reserveFactor << RESERVE_FACTOR_START_BIT_POSITION); } /** * @notice Gets the reserve factor of the reserve * @param self The reserve configuration * @return The reserve factor */ function getReserveFactor( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256) { return (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION; } /** * @notice Sets the borrow cap of the reserve * @param self The reserve configuration * @param borrowCap The borrow cap */ function setBorrowCap( DataTypes.ReserveConfigurationMap memory self, uint256 borrowCap ) internal pure { require(borrowCap <= MAX_VALID_BORROW_CAP, Errors.INVALID_BORROW_CAP); self.data = (self.data & BORROW_CAP_MASK) | (borrowCap << BORROW_CAP_START_BIT_POSITION); } /** * @notice Gets the borrow cap of the reserve * @param self The reserve configuration * @return The borrow cap */ function getBorrowCap( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256) { return (self.data & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION; } /** * @notice Sets the supply cap of the reserve * @param self The reserve configuration * @param supplyCap The supply cap */ function setSupplyCap( DataTypes.ReserveConfigurationMap memory self, uint256 supplyCap ) internal pure { require(supplyCap <= MAX_VALID_SUPPLY_CAP, Errors.INVALID_SUPPLY_CAP); self.data = (self.data & SUPPLY_CAP_MASK) | (supplyCap << SUPPLY_CAP_START_BIT_POSITION); } /** * @notice Gets the supply cap of the reserve * @param self The reserve configuration * @return The supply cap */ function getSupplyCap( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256) { return (self.data & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION; } /** * @notice Sets the debt ceiling in isolation mode for the asset * @param self The reserve configuration * @param ceiling The maximum debt ceiling for the asset */ function setDebtCeiling( DataTypes.ReserveConfigurationMap memory self, uint256 ceiling ) internal pure { require(ceiling <= MAX_VALID_DEBT_CEILING, Errors.INVALID_DEBT_CEILING); self.data = (self.data & DEBT_CEILING_MASK) | (ceiling << DEBT_CEILING_START_BIT_POSITION); } /** * @notice Gets the debt ceiling for the asset if the asset is in isolation mode * @param self The reserve configuration * @return The debt ceiling (0 = isolation mode disabled) */ function getDebtCeiling( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256) { return (self.data & ~DEBT_CEILING_MASK) >> DEBT_CEILING_START_BIT_POSITION; } /** * @notice Sets the liquidation protocol fee of the reserve * @param self The reserve configuration * @param liquidationProtocolFee The liquidation protocol fee */ function setLiquidationProtocolFee( DataTypes.ReserveConfigurationMap memory self, uint256 liquidationProtocolFee ) internal pure { require( liquidationProtocolFee <= MAX_VALID_LIQUIDATION_PROTOCOL_FEE, Errors.INVALID_LIQUIDATION_PROTOCOL_FEE ); self.data = (self.data & LIQUIDATION_PROTOCOL_FEE_MASK) | (liquidationProtocolFee << LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION); } /** * @dev Gets the liquidation protocol fee * @param self The reserve configuration * @return The liquidation protocol fee */ function getLiquidationProtocolFee( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256) { return (self.data & ~LIQUIDATION_PROTOCOL_FEE_MASK) >> LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION; } /** * @notice Sets the unbacked mint cap of the reserve * @param self The reserve configuration * @param unbackedMintCap The unbacked mint cap */ function setUnbackedMintCap( DataTypes.ReserveConfigurationMap memory self, uint256 unbackedMintCap ) internal pure { require(unbackedMintCap <= MAX_VALID_UNBACKED_MINT_CAP, Errors.INVALID_UNBACKED_MINT_CAP); self.data = (self.data & UNBACKED_MINT_CAP_MASK) | (unbackedMintCap << UNBACKED_MINT_CAP_START_BIT_POSITION); } /** * @dev Gets the unbacked mint cap of the reserve * @param self The reserve configuration * @return The unbacked mint cap */ function getUnbackedMintCap( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256) { return (self.data & ~UNBACKED_MINT_CAP_MASK) >> UNBACKED_MINT_CAP_START_BIT_POSITION; } /** * @notice Sets the eMode asset category * @param self The reserve configuration * @param category The asset category when the user selects the eMode */ function setEModeCategory( DataTypes.ReserveConfigurationMap memory self, uint256 category ) internal pure { require(category <= MAX_VALID_EMODE_CATEGORY, Errors.INVALID_EMODE_CATEGORY); self.data = (self.data & EMODE_CATEGORY_MASK) | (category << EMODE_CATEGORY_START_BIT_POSITION); } /** * @dev Gets the eMode asset category * @param self The reserve configuration * @return The eMode category for the asset */ function getEModeCategory( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256) { return (self.data & ~EMODE_CATEGORY_MASK) >> EMODE_CATEGORY_START_BIT_POSITION; } /** * @notice Sets the flashloanable flag for the reserve * @param self The reserve configuration * @param flashLoanEnabled True if the asset is flashloanable, false otherwise */ function setFlashLoanEnabled( DataTypes.ReserveConfigurationMap memory self, bool flashLoanEnabled ) internal pure { self.data = (self.data & FLASHLOAN_ENABLED_MASK) | (uint256(flashLoanEnabled ? 1 : 0) << FLASHLOAN_ENABLED_START_BIT_POSITION); } /** * @notice Gets the flashloanable flag for the reserve * @param self The reserve configuration * @return The flashloanable flag */ function getFlashLoanEnabled( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (bool) { return (self.data & ~FLASHLOAN_ENABLED_MASK) != 0; } /** * @notice Gets the configuration flags of the reserve * @param self The reserve configuration * @return The state flag representing active * @return The state flag representing frozen * @return The state flag representing borrowing enabled * @return The state flag representing stableRateBorrowing enabled * @return The state flag representing paused */ function getFlags( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (bool, bool, bool, bool, bool) { uint256 dataLocal = self.data; return ( (dataLocal & ~ACTIVE_MASK) != 0, (dataLocal & ~FROZEN_MASK) != 0, (dataLocal & ~BORROWING_MASK) != 0, (dataLocal & ~STABLE_BORROWING_MASK) != 0, (dataLocal & ~PAUSED_MASK) != 0 ); } /** * @notice Gets the configuration parameters of the reserve from storage * @param self The reserve configuration * @return The state param representing ltv * @return The state param representing liquidation threshold * @return The state param representing liquidation bonus * @return The state param representing reserve decimals * @return The state param representing reserve factor * @return The state param representing eMode category */ function getParams( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256, uint256, uint256, uint256, uint256, uint256) { uint256 dataLocal = self.data; return ( dataLocal & ~LTV_MASK, (dataLocal & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION, (dataLocal & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION, (dataLocal & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION, (dataLocal & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION, (dataLocal & ~EMODE_CATEGORY_MASK) >> EMODE_CATEGORY_START_BIT_POSITION ); } /** * @notice Gets the caps parameters of the reserve from storage * @param self The reserve configuration * @return The state param representing borrow cap * @return The state param representing supply cap. */ function getCaps( DataTypes.ReserveConfigurationMap memory self ) internal pure returns (uint256, uint256) { uint256 dataLocal = self.data; return ( (dataLocal & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION, (dataLocal & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION ); } }
// SPDX-License-Identifier: BUSL-1.1 pragma solidity ^0.8.0; import {Errors} from '../helpers/Errors.sol'; import {DataTypes} from '../types/DataTypes.sol'; import {ReserveConfiguration} from './ReserveConfiguration.sol'; /** * @title UserConfiguration library * @author Aave * @notice Implements the bitmap logic to handle the user configuration */ library UserConfiguration { using ReserveConfiguration for DataTypes.ReserveConfigurationMap; uint256 internal constant BORROWING_MASK = 0x5555555555555555555555555555555555555555555555555555555555555555; uint256 internal constant COLLATERAL_MASK = 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA; /** * @notice Sets if the user is borrowing the reserve identified by reserveIndex * @param self The configuration object * @param reserveIndex The index of the reserve in the bitmap * @param borrowing True if the user is borrowing the reserve, false otherwise */ function setBorrowing( DataTypes.UserConfigurationMap storage self, uint256 reserveIndex, bool borrowing ) internal { unchecked { require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX); uint256 bit = 1 << (reserveIndex << 1); if (borrowing) { self.data |= bit; } else { self.data &= ~bit; } } } /** * @notice Sets if the user is using as collateral the reserve identified by reserveIndex * @param self The configuration object * @param reserveIndex The index of the reserve in the bitmap * @param usingAsCollateral True if the user is using the reserve as collateral, false otherwise */ function setUsingAsCollateral( DataTypes.UserConfigurationMap storage self, uint256 reserveIndex, bool usingAsCollateral ) internal { unchecked { require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX); uint256 bit = 1 << ((reserveIndex << 1) + 1); if (usingAsCollateral) { self.data |= bit; } else { self.data &= ~bit; } } } /** * @notice Returns if a user has been using the reserve for borrowing or as collateral * @param self The configuration object * @param reserveIndex The index of the reserve in the bitmap * @return True if the user has been using a reserve for borrowing or as collateral, false otherwise */ function isUsingAsCollateralOrBorrowing( DataTypes.UserConfigurationMap memory self, uint256 reserveIndex ) internal pure returns (bool) { unchecked { require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX); return (self.data >> (reserveIndex << 1)) & 3 != 0; } } /** * @notice Validate a user has been using the reserve for borrowing * @param self The configuration object * @param reserveIndex The index of the reserve in the bitmap * @return True if the user has been using a reserve for borrowing, false otherwise */ function isBorrowing( DataTypes.UserConfigurationMap memory self, uint256 reserveIndex ) internal pure returns (bool) { unchecked { require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX); return (self.data >> (reserveIndex << 1)) & 1 != 0; } } /** * @notice Validate a user has been using the reserve as collateral * @param self The configuration object * @param reserveIndex The index of the reserve in the bitmap * @return True if the user has been using a reserve as collateral, false otherwise */ function isUsingAsCollateral( DataTypes.UserConfigurationMap memory self, uint256 reserveIndex ) internal pure returns (bool) { unchecked { require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX); return (self.data >> ((reserveIndex << 1) + 1)) & 1 != 0; } } /** * @notice Checks if a user has been supplying only one reserve as collateral * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0 * @param self The configuration object * @return True if the user has been supplying as collateral one reserve, false otherwise */ function isUsingAsCollateralOne( DataTypes.UserConfigurationMap memory self ) internal pure returns (bool) { uint256 collateralData = self.data & COLLATERAL_MASK; return collateralData != 0 && (collateralData & (collateralData - 1) == 0); } /** * @notice Checks if a user has been supplying any reserve as collateral * @param self The configuration object * @return True if the user has been supplying as collateral any reserve, false otherwise */ function isUsingAsCollateralAny( DataTypes.UserConfigurationMap memory self ) internal pure returns (bool) { return self.data & COLLATERAL_MASK != 0; } /** * @notice Checks if a user has been borrowing only one asset * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0 * @param self The configuration object * @return True if the user has been supplying as collateral one reserve, false otherwise */ function isBorrowingOne(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) { uint256 borrowingData = self.data & BORROWING_MASK; return borrowingData != 0 && (borrowingData & (borrowingData - 1) == 0); } /** * @notice Checks if a user has been borrowing from any reserve * @param self The configuration object * @return True if the user has been borrowing any reserve, false otherwise */ function isBorrowingAny(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) { return self.data & BORROWING_MASK != 0; } /** * @notice Checks if a user has not been using any reserve for borrowing or supply * @param self The configuration object * @return True if the user has not been borrowing or supplying any reserve, false otherwise */ function isEmpty(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) { return self.data == 0; } /** * @notice Returns the Isolation Mode state of the user * @param self The configuration object * @param reservesData The state of all the reserves * @param reservesList The addresses of all the active reserves * @return True if the user is in isolation mode, false otherwise * @return The address of the only asset used as collateral * @return The debt ceiling of the reserve */ function getIsolationModeState( DataTypes.UserConfigurationMap memory self, mapping(address => DataTypes.ReserveData) storage reservesData, mapping(uint256 => address) storage reservesList ) internal view returns (bool, address, uint256) { if (isUsingAsCollateralOne(self)) { uint256 assetId = _getFirstAssetIdByMask(self, COLLATERAL_MASK); address assetAddress = reservesList[assetId]; uint256 ceiling = reservesData[assetAddress].configuration.getDebtCeiling(); if (ceiling != 0) { return (true, assetAddress, ceiling); } } return (false, address(0), 0); } /** * @notice Returns the siloed borrowing state for the user * @param self The configuration object * @param reservesData The data of all the reserves * @param reservesList The reserve list * @return True if the user has borrowed a siloed asset, false otherwise * @return The address of the only borrowed asset */ function getSiloedBorrowingState( DataTypes.UserConfigurationMap memory self, mapping(address => DataTypes.ReserveData) storage reservesData, mapping(uint256 => address) storage reservesList ) internal view returns (bool, address) { if (isBorrowingOne(self)) { uint256 assetId = _getFirstAssetIdByMask(self, BORROWING_MASK); address assetAddress = reservesList[assetId]; if (reservesData[assetAddress].configuration.getSiloedBorrowing()) { return (true, assetAddress); } } return (false, address(0)); } /** * @notice Returns the address of the first asset flagged in the bitmap given the corresponding bitmask * @param self The configuration object * @return The index of the first asset flagged in the bitmap once the corresponding mask is applied */ function _getFirstAssetIdByMask( DataTypes.UserConfigurationMap memory self, uint256 mask ) internal pure returns (uint256) { unchecked { uint256 bitmapData = self.data & mask; uint256 firstAssetPosition = bitmapData & ~(bitmapData - 1); uint256 id; while ((firstAssetPosition >>= 2) != 0) { id += 1; } return id; } } }
// SPDX-License-Identifier: BUSL-1.1 pragma solidity ^0.8.0; /** * @title Errors library * @author Aave * @notice Defines the error messages emitted by the different contracts of the Aave protocol */ library Errors { string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin' string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin' string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin' string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin' string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin' string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge' string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered' string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider' string public constant NOT_CONTRACT = '9'; // 'Address is not a contract' string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator' string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken' string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid' string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function' string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list' string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached' string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets' string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset' string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0' string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium' string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve' string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category' string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee' string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool' string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint' string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn' string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0' string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve' string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen' string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused' string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled' string public constant STABLE_BORROWING_NOT_ENABLED = '31'; // 'Stable borrowing is not enabled' string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance' string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected' string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0' string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold' string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow' string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed' string public constant AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '38'; // 'The requested amount is greater than the max loan size in stable rate mode' string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type' string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed' string public constant NO_OUTSTANDING_STABLE_DEBT = '41'; // 'User does not have outstanding stable rate debt on this reserve' string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve' string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0' string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met' string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold' string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated' string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency' string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters' string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded' string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded' string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded' string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded' string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)' string public constant STABLE_DEBT_NOT_ZERO = '55'; // 'Stable debt supply is not zero' string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero' string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed' string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category' string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed' string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode' string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized' string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero' string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve' string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve' string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve' string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve' string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve' string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve' string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve' string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve' string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve' string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve' string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index' string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address' string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not' string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid' string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration' string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature' string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported' string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero' string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed' string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio' string public constant INVALID_OPTIMAL_STABLE_TO_TOTAL_DEBT_RATIO = '84'; // 'Invalid optimal stable to total debt ratio' string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued' string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list' string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match' string public constant STABLE_BORROWING_ENABLED = '88'; // 'Stable borrowing is enabled' string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one' string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0 string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled }
// SPDX-License-Identifier: BUSL-1.1 pragma solidity ^0.8.0; library DataTypes { struct ReserveData { //stores the reserve configuration ReserveConfigurationMap configuration; //the liquidity index. Expressed in ray uint128 liquidityIndex; //the current supply rate. Expressed in ray uint128 currentLiquidityRate; //variable borrow index. Expressed in ray uint128 variableBorrowIndex; //the current variable borrow rate. Expressed in ray uint128 currentVariableBorrowRate; //the current stable borrow rate. Expressed in ray uint128 currentStableBorrowRate; //timestamp of last update uint40 lastUpdateTimestamp; //the id of the reserve. Represents the position in the list of the active reserves uint16 id; //aToken address address aTokenAddress; //stableDebtToken address address stableDebtTokenAddress; //variableDebtToken address address variableDebtTokenAddress; //address of the interest rate strategy address interestRateStrategyAddress; //the current treasury balance, scaled uint128 accruedToTreasury; //the outstanding unbacked aTokens minted through the bridging feature uint128 unbacked; //the outstanding debt borrowed against this asset in isolation mode uint128 isolationModeTotalDebt; } struct ReserveConfigurationMap { //bit 0-15: LTV //bit 16-31: Liq. threshold //bit 32-47: Liq. bonus //bit 48-55: Decimals //bit 56: reserve is active //bit 57: reserve is frozen //bit 58: borrowing is enabled //bit 59: stable rate borrowing enabled //bit 60: asset is paused //bit 61: borrowing in isolation mode is enabled //bit 62: siloed borrowing enabled //bit 63: flashloaning enabled //bit 64-79: reserve factor //bit 80-115 borrow cap in whole tokens, borrowCap == 0 => no cap //bit 116-151 supply cap in whole tokens, supplyCap == 0 => no cap //bit 152-167 liquidation protocol fee //bit 168-175 eMode category //bit 176-211 unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled //bit 212-251 debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals //bit 252-255 unused uint256 data; } struct UserConfigurationMap { /** * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset. * The first bit indicates if an asset is used as collateral by the user, the second whether an * asset is borrowed by the user. */ uint256 data; } struct EModeCategory { // each eMode category has a custom ltv and liquidation threshold uint16 ltv; uint16 liquidationThreshold; uint16 liquidationBonus; // each eMode category may or may not have a custom oracle to override the individual assets price oracles address priceSource; string label; } enum InterestRateMode {NONE, STABLE, VARIABLE} struct ReserveCache { uint256 currScaledVariableDebt; uint256 nextScaledVariableDebt; uint256 currPrincipalStableDebt; uint256 currAvgStableBorrowRate; uint256 currTotalStableDebt; uint256 nextAvgStableBorrowRate; uint256 nextTotalStableDebt; uint256 currLiquidityIndex; uint256 nextLiquidityIndex; uint256 currVariableBorrowIndex; uint256 nextVariableBorrowIndex; uint256 currLiquidityRate; uint256 currVariableBorrowRate; uint256 reserveFactor; ReserveConfigurationMap reserveConfiguration; address aTokenAddress; address stableDebtTokenAddress; address variableDebtTokenAddress; uint40 reserveLastUpdateTimestamp; uint40 stableDebtLastUpdateTimestamp; } struct ExecuteLiquidationCallParams { uint256 reservesCount; uint256 debtToCover; address collateralAsset; address debtAsset; address user; bool receiveAToken; address priceOracle; uint8 userEModeCategory; address priceOracleSentinel; } struct ExecuteSupplyParams { address asset; uint256 amount; address onBehalfOf; uint16 referralCode; } struct ExecuteBorrowParams { address asset; address user; address onBehalfOf; uint256 amount; InterestRateMode interestRateMode; uint16 referralCode; bool releaseUnderlying; uint256 maxStableRateBorrowSizePercent; uint256 reservesCount; address oracle; uint8 userEModeCategory; address priceOracleSentinel; } struct ExecuteRepayParams { address asset; uint256 amount; InterestRateMode interestRateMode; address onBehalfOf; bool useATokens; } struct ExecuteWithdrawParams { address asset; uint256 amount; address to; uint256 reservesCount; address oracle; uint8 userEModeCategory; } struct ExecuteSetUserEModeParams { uint256 reservesCount; address oracle; uint8 categoryId; } struct FinalizeTransferParams { address asset; address from; address to; uint256 amount; uint256 balanceFromBefore; uint256 balanceToBefore; uint256 reservesCount; address oracle; uint8 fromEModeCategory; } struct FlashloanParams { address receiverAddress; address[] assets; uint256[] amounts; uint256[] interestRateModes; address onBehalfOf; bytes params; uint16 referralCode; uint256 flashLoanPremiumToProtocol; uint256 flashLoanPremiumTotal; uint256 maxStableRateBorrowSizePercent; uint256 reservesCount; address addressesProvider; uint8 userEModeCategory; bool isAuthorizedFlashBorrower; } struct FlashloanSimpleParams { address receiverAddress; address asset; uint256 amount; bytes params; uint16 referralCode; uint256 flashLoanPremiumToProtocol; uint256 flashLoanPremiumTotal; } struct FlashLoanRepaymentParams { uint256 amount; uint256 totalPremium; uint256 flashLoanPremiumToProtocol; address asset; address receiverAddress; uint16 referralCode; } struct CalculateUserAccountDataParams { UserConfigurationMap userConfig; uint256 reservesCount; address user; address oracle; uint8 userEModeCategory; } struct ValidateBorrowParams { ReserveCache reserveCache; UserConfigurationMap userConfig; address asset; address userAddress; uint256 amount; InterestRateMode interestRateMode; uint256 maxStableLoanPercent; uint256 reservesCount; address oracle; uint8 userEModeCategory; address priceOracleSentinel; bool isolationModeActive; address isolationModeCollateralAddress; uint256 isolationModeDebtCeiling; } struct ValidateLiquidationCallParams { ReserveCache debtReserveCache; uint256 totalDebt; uint256 healthFactor; address priceOracleSentinel; } struct CalculateInterestRatesParams { uint256 unbacked; uint256 liquidityAdded; uint256 liquidityTaken; uint256 totalStableDebt; uint256 totalVariableDebt; uint256 averageStableBorrowRate; uint256 reserveFactor; address reserve; address aToken; } struct InitReserveParams { address asset; address aTokenAddress; address stableDebtAddress; address variableDebtAddress; address interestRateStrategyAddress; uint16 reservesCount; uint16 maxNumberReserves; } }
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.10; import {IERC20} from '@aave/core-v3/contracts/dependencies/openzeppelin/contracts/IERC20.sol'; import {DataTypes} from '@aave/core-v3/contracts/protocol/libraries/types/DataTypes.sol'; /** * @title DataTypesHelper * @author Aave * @dev Helper library to track user current debt balance, used by WrappedTokenGatewayV3 */ library DataTypesHelper { /** * @notice Fetches the user current stable and variable debt balances * @param user The user address * @param reserve The reserve data object * @return The stable debt balance * @return The variable debt balance **/ function getUserCurrentDebt(address user, DataTypes.ReserveData memory reserve) internal view returns (uint256, uint256) { return ( IERC20(reserve.stableDebtTokenAddress).balanceOf(user), IERC20(reserve.variableDebtTokenAddress).balanceOf(user) ); } }
// SPDX-License-Identifier: AGPL-3.0 pragma solidity ^0.8.10; interface IWrappedTokenGatewayV3 { function depositETH( address pool, address onBehalfOf, uint16 referralCode ) external payable; function withdrawETH( address pool, uint256 amount, address onBehalfOf ) external; function repayETH( address pool, uint256 amount, uint256 rateMode, address onBehalfOf ) external payable; function borrowETH( address pool, uint256 amount, uint256 interestRateMode, uint16 referralCode ) external; function withdrawETHWithPermit( address pool, uint256 amount, address to, uint256 deadline, uint8 permitV, bytes32 permitR, bytes32 permitS ) external; }
{ "evmVersion": "berlin", "libraries": {}, "metadata": { "bytecodeHash": "ipfs", "useLiteralContent": true }, "optimizer": { "enabled": true, "runs": 100000 }, "remappings": [], "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } } }
[{"inputs":[{"internalType":"address","name":"weth","type":"address"},{"internalType":"address","name":"owner","type":"address"},{"internalType":"contract IPool","name":"pool","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"interestRateMode","type":"uint256"},{"internalType":"uint16","name":"referralCode","type":"uint16"}],"name":"borrowETH","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"onBehalfOf","type":"address"},{"internalType":"uint16","name":"referralCode","type":"uint16"}],"name":"depositETH","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"emergencyEtherTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"emergencyTokenTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getWETHAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rateMode","type":"uint256"},{"internalType":"address","name":"onBehalfOf","type":"address"}],"name":"repayETH","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawETH","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"permitV","type":"uint8"},{"internalType":"bytes32","name":"permitR","type":"bytes32"},{"internalType":"bytes32","name":"permitS","type":"bytes32"}],"name":"withdrawETHWithPermit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]
Contract Creation Code
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
Deployed Bytecode
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
Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)
000000000000000000000000c558dbdd856501fcd9aaf1e62eae57a9f0629a3c000000000000000000000000fa0e305e0f46ab04f00ae6b5f4560d61a2183e000000000000000000000000006ae43d3271ff6888e7fc43fd7321a503ff738951
-----Decoded View---------------
Arg [0] : weth (address): 0xC558DBdd856501FCd9aaF1E62eae57A9F0629a3c
Arg [1] : owner (address): 0xfA0e305E0f46AB04f00ae6b5f4560d61a2183E00
Arg [2] : pool (address): 0x6Ae43d3271ff6888e7Fc43Fd7321a503ff738951
-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 000000000000000000000000c558dbdd856501fcd9aaf1e62eae57a9f0629a3c
Arg [1] : 000000000000000000000000fa0e305e0f46ab04f00ae6b5f4560d61a2183e00
Arg [2] : 0000000000000000000000006ae43d3271ff6888e7fc43fd7321a503ff738951
Loading...
Loading
[ Download: CSV Export ]
[ Download: CSV Export ]
A contract address hosts a smart contract, which is a set of code stored on the blockchain that runs when predetermined conditions are met. Learn more about addresses in our Knowledge Base.